Basic study about cooperative movement between a human and an agent with entrainment

The use of an agent in the environment, as in medical treatment, welfare, the construction field, and the home, is examined. It is necessary for the agent to be able to work cooperatively with a human, and that may be a problem. Therefore, this study pays attention to the phenomenon that is called entrainment. This is the phenomenon where the rhythm of a certain person and the partner in the communication is synchronized. The purpose of this study is to perform a basic examination into applying an entrainment in order to realize cooperation in operations between a human and an agent. Since many human rhythms are expressed by a nonlinear oscillator, we simulated limited cycle oscillators, which are one of two nonlinear oscillators that cause interactions between agents, as the basic examination for this achievement. Consequently, entrainment of limited cycle oscillators with rhythms which differ has been checked in certain conditions. As a result, the possibility that cooperative movement could be gained was suggested.     

Reduction of higher harmonic sequences in terminal voltage of an AC exciting synchronous generator using magnetically anisotropic slot wedges

This paper describes relationships between characteristics of a magnetically anisotropic slot wedge and voltage higher harmonics in an ac exciting synchronous generator terminal due to permeance ripple caused by an open-slot-type rotor. From the relationships obtained, practical guidelines were formulated for machine designs applying the magnetically anisotropic slot wedge. The results are as follows.

• 1 (1) Equivalent permeability of the magnetically anisotropic slot wedge became isotropic wedge permeability for air-gap flux ripple.
• 2 (2) Two ways were identified to reduce voltage-higher harmonics by using the slot wedges.
• 3 (3) The level of leakage flux passing through the anisotropic slot wedge was determined only by its permeability in the width direction.
• 4 (4) Effectiveness of the magnetic anisotropic slot wedges inserted into the stator slots was verified from experimental results using a model machine of the open- slot-type rotor.

     

Effects of Solvents in the Polyethylene Glycol Series on the Bonding of Copper Joints Using Ag2O Paste

The effects of reducing solvents on the bonding process using silver oxide paste in a copper joint were investigated. Three solvent types were tested: diethylene glycol (DEG), triethylene glycol (TEG), and polyethylene glycol (PEG). The strength of the joints was assessed by fracturing, which occurred at the interface of the copper oxide layer and the copper substrate in DEG and TEG samples and at the bonded interface in the PEG sample. Analysis of the samples revealed that, in the DEG and TEG samples, the copper substrate was oxidized during the bonding process, which compromised the shear strength of the joints. In contrast, the PEG sample exhibited nonuniform sintering of the silver layer while retaining good shear strength. It was found that the combination of DEG and PEG produced optimum shear strength in the copper joint, as PEG suppressed the growth of copper oxide and DEG promoted the formation of a dense sintered silver layer. The bonding strength achieved was higher than that of the gold-to-gold joint made using standard Pb-5Sn solder.     

Distribution of double bonds in thermally degraded polyisobutylene

The distribution of double bonds in thermally degraded polyisobutylene was determined quantitatively by using pulsed Fourier transform ¹H n.m.r. spectroscopic analysis. The double bonds in the degraded polymer did not exist in the interior but at the terminal positions of the polymer chain. These olefins were of the terminal trisubstituted and terminal vinylidene types. The content of the former was much greater than that of the latter. This shows that radical chain transfer predominantly occurs at the methylene hydrogen rather than at the methyl groups of the polymer chain. The average number of double bonds per molecule, f, was greater than 1 and tended to be near 2. Thereby most of the degraded polyisobutylene was shown to have two terminal unsaturations per molecule.     

Contents of barbaloin-related compounds in aloe drinks and their change during storage

The contents of barbaloin (BA), isoBA, aloin-dimers A, B, C, D and aloe-emodin (AE) in aloe drinks were investigated. BA and isoBA were detected in 30 of the 31 samples at the levels of 120-570 micrograms/mL and 120-580 micrograms/mL, respectively. Aloin-dimers A, B, C and D were detected in 8 of the 31 samples at the levels of 12-38 micrograms/mL, 13-39 micrograms/mL, 11-36 micrograms/mL and 16-69 micrograms/mL, respectively. AE was detected in all of the 31 samples at the levels of 0.03-1.3 micrograms/mL. When aloe drinks were stored for 4 weeks at 5 degrees C after opening the bottle, decrease of BA and isoBA, and increase of AE and aloin-dimers A, B, C and D were observed in most cases. However, in a few aloe drinks, all of BA, isoBA, aloin-dimers A, B, C, D and AE decreased. In these drinks, the existence of aloin-trimer was elucidated by LC/MS analyses. These data suggested that BA in aloe drinks is converted to the dimer and then to the trimer during storage.     

An application of the 2-nitrobenzenesulfenyl method to proteomic profiling of human colorectal carcinoma: A novel approach for biomarker discovery

In the development of novel biomarkers, the proteomic approach is advantageous because using it the cancer-associated proteins can be directly identified. We previously developed a 2-nitrobenzenesulfenyl (NBS) method to improve quantitative proteome analysis. Here, we applied this method to proteomic profiling of colorectal carcinoma (CRC) to identify novel proteins with altered expression in CRC. Each pair of tumor and normal tissue specimens from 12 CRC patients was analyzed, and approximately 5000 NBS-labeled paired peaks were quantified. Peaks with altered signal intensities (>1.5-fold) and occurring frequently in the samples (>70%) were selected, and 128 proteins were identified by MS/MS analyses as differentially expressed proteins in CRC tissues. Many proteins were newly revealed to be CRC related; 30 were reported in earlier studies of CRC. Six proteins that were up-regulated in CRC (ZYX, RAN, RCN1, AHCY, LGALS1, and VIM) were further characterized and validated by Western blot and immunohistochemistry. All six were found to be CRC-localized, either in cancer cells or in stroma cells near the cancer cells. These results indicate that the proteins identified in this study are novel candidates for CRC markers, and that the NBS method is useful in proteome mining to discover novel biomarkers.     

STEAM DRYING OF SINTERED SPHERES OF GLASS BEADS

ABSTRACT

Superheated steam drying of sintered spheres of glass beads with different diameters is investigated to reveal the effects of the gravitational force on drying rates. In a previous study, the drying rate curves of small samples with coarse glass beads in which the frictional resistance to flow of water and the effect of the gravitational force are negligible, were predicted by an evaporation zone model.In the present investigation, the drying rate curves of sintered spheres of glass beads with diameters ranging from 1.53×10^-2m to 4.99×lO^-2m are experimentally and theoretically obtained, and also the capillary pressure curves are measured by use of Haines' apparatus. The drying rate curves of large samples in which the effect of the gravitational force can not be negligible, are compared with those for small samples and the difference among these curves is discussed in terms of the moisture distributions which are estimated from the evaporation zone model with the observed capillary pressure curves.     

Fabrication and piezoelectric properties of BaTiO3/BaTiO3-Bi(Mg1/2Ti1/2)O3-BiFeO3 composites

We fabricated xBaTiO₃ (BT)/(1-x)[BaTiO₃-Bi(Mg_1/2Ti_1/2)O₃-BiFeO₃] (BT-BMT-BF)?+?0.1?wt%MnCO₃ composites by spark plasma sintering and investigated the effect of BT content x, BT powder size, and BT-BMT-BF composition on piezoelectric properties. For xBT/(1-x)(0.3BT-0.1BMT-0.6BF) +?0.1?wt%MnCO₃ (x?=?0–0.75) composites with a 0.5-µm BT powder, the dielectric constant was increased with x, and the relative density was decreased at x?=?0.67 and 0.75, creating optimum BT content of x?=?0.50 with a piezoelectric constant d₃₃ of 107?pC/N. When a larger 1.5-µm BT powder was utilized for the composite with x?=?0.50, the d₃₃ value increased to 150?pC/N due to the grain size effect of the BT grains. To compensate for a compositional change from the optimum 0.3BT-0.1BMT-0.6BF due to partial diffusion between the BT and 0.3BT-0.1BMT-0.6BF grains, a 0.5BT/0.5(0.275BT-0.1BMT-0.625BF)?+?0.1?wt%MnCO₃ composite with the 1.5-µm BT powder was fabricated. We obtained an increased d₃₃ value of 166?pC/N. These results provided a useful composite design to enhance the piezoelectric properties.     

Super environment-friendly electrodeposition paint

Super low VOC due to new composition/reaction mechanism can minimize the environmental risk as it does not contain lead and tin, hazardous air pollutants (HAPs) and endocrine disrupters (EPA/67 items, SPEED’98/JEA/67 items) currently specified as contaminants. New EAD (electrolyzed activate deposition paint) is not the only conventional cure agent or solvent, but also the super low VOC, HAPs materials and endocrine disrupters. The electric energy used by EAD is utilized for the reaction but not for the deposition. EAD consists of two technologies. One is propargyl group change to the allene by using electrodeposition. Propargyl group is stable, but allene group is highly polymerizing. As a result, EAD had high bath stability. The other is sulfonium change to sulfide by using electrodeposition. This sulfonium salt is lost as a result of the electrolytic reduction, and hence can be irreversibly rendered non-conductive. As a result, EAD showed high throwing power.     

Fabrication of 0.24Pb(In1/2Nb1/2)O3-0.42Pb(Mg1/3Nb2/3)O3-0.34PbTiO3 transparent ceramics by conventional sintering technique

0.24Pb(In_1/2Nb_1/2)O₃-0.42Pb(Mg_1/3Nb_2/3)O₃-0.34PbTiO₃ transparent ceramics were fabricated by a conventional sintering technique. Through optimization of sintering conditions of calcination and sintering temperatures and time, the obtained ceramics showed high optical transmittance of 53% and 71% at light wavelengths of 1300 and 2000 nm, respectively. The ceramics showed a rhombohedral to tetragonal phase transition at ~120°C and a tetragonal to cubic phase transition at 222°C. These transition temperatures were higher than those of 0.67Pb(Mg_1/3Nb_2/3)-0.33PbTiO₃ ceramics. In addition, the ceramics had a ferroelectric hysteresis loop, a large piezoelectric constant d₃₃ of 407 pC/N, and a planar electromechanical coupling factor k_p of 52%. These results suggest that the transparent ceramics may be used as a temperature-stable, linear electro-optic material.