SiO2 thin film deposition on the inner surface of a poly(tetra-fluoroethylene) narrow tube by atmospheric-pressure glow microplasma

SiO₂ thin films were deposited on the inner surfaces of a commercial poly(tetrafluoroethylene) narrow tube with an inner diameter of 0.5 mm using tetraethoxysilane/O₂ feedstock gases and He carrier gas by atmospheric-pressure microplasma-enhanced chemical vapor deposition. A glow microplasma was generated inside the tube by radio frequency (RF) capacitively coupled discharge. X-ray photoelectron spectroscopy spectra showed that the tube inner surface was covered by a SiO₂ thin film. Transparent SiO₂ thin films were obtained with a deposition rate of 230 nm/min at an RF power of 6 W and substrate temperature of 100 °C. The wettability of the SiO₂-coated tube was about 3 times as large as that of an untreated sample tube.     

Dominant stress region for crack initiation at interface edge of microdot on a substrate

In order to examine the mechanics of crack initiation at the free interface edge of a microcomponent on a substrate, delamination tests are carried out for two specimen shapes of Cr microdots on a SiO₂ substrate. The microdots of the first specimen are shaped like the frustum of a round cone. The Cr microdots are successfully delaminated from the SiO₂ substrate in a brittle manner and the critical load is measured by atomic force microscopy (AFM) with a lateral loading apparatus. Stress analysis reveals that a singular stress field exists near the interface edge and the strength for the crack initiation is governed by the intensified normal stress field. The critical stress intensity parameter is evaluated as K_σC ≈ 0.24 MPa m^0.39. Similar delamination tests are conducted for microdots shaped like the frustum of an oval cone. The stress distributions at the crack initiation of this specimen shape show a higher normal stress than the first specimen shape in the region near the interface edge of about x < 40 nm, while it is lower in the region of about x > 50 nm (x: distance from the edge). This suggests a limitation of conventional fracture mechanics: namely, the crack initiation in these specimens is not uniquely governed by the intensity of the singular field. It is found that the delamination crack is initiated when the averaged stress σ_ya in the region of 90-130 nm reaches 190-270 MPa, regardless of the specimen shape. This indicates that the dominant stress region of crack initiation is roughly estimated as 90-130 nm and the criterion is given in terms of the averaged stress in the region.     

Effects of neural refractoriness on spatio-temporal variability in spike initiations with Electrical stimulation.

In this paper, the effects of neural refractoriness on action potential (spike) initiations with electrical stimulation are investigated using computer modeling and simulation techniques. The computational model was composed of a myelinated nerve fiber with 50 nodes of Ranvier, each consisting of stochastic sodium and potassium channels, making it possible to represent the fluctuations of spike initiation. A series of two-pulse stimuli was presented by a stimulating electrode above the central (26th) node of Ranvier. The amplitude of the first (masker) pulse stimulus was set such that the masker pulse stimulus evoked spikes on each trial, while that of the second (probe) pulse stimulus was set such that the probe pulse stimulus evoked spikes on a half of trials, threshold values. Then the transmembrane potentials in response to the probe pulse stimulus were recorded at each node (i.e., 1-50 nodes) in order to determine the spike initiation node and time. From the observation of the spike initiation node and time, a spatio-temporal histogram as well as a spatial variability and a temporal variability of spike initiations was generated which allowed us to interpret fluctuations in spike initiation node and time. It was shown that the distribution of spike initiations tended to become greater spatially and longer temporally as the masker-probe intervals (MPIs) of the two-pulse stimuli shortened. It was also shown that the number of activated sodium channels as functions of space and time tended to become smaller due to inactivation of sodium channels and varied spatially and temporally as MPIs shortened. These findings may imply that the stochastic sodium channels during a relative refractory period may contribute to enhancing the fluctuations in spike initiations, and give us an insight into encoding information with electric stimuli to improve the performance of the prosthetic devices, especially cochlear implants.     

Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory

A two-dimensional global higher-order deformation theory is presented for thermal buckling of cross-ply laminated composite and sandwich plates. By using the method of power series expansion of continuous displacement components, a set of fundamental governing equations which can take into account the effects of both transverse shear and normal stresses is derived through the principle of virtual work. Several sets of truncated Mth-order approximate theories are applied to solve the eigenvalue problems of a simply supported multilayered plate. Modal transverse shear and normal stresses can be calculated by integrating the three-dimensional equations of equilibrium in the thickness direction, and satisfying the continuity conditions at the interface between layers and stress boundary conditions at the external surfaces. Numerical results are compared with those of the published three-dimensional layerwise theory in which both in-plane and normal displacements are assumed to be C⁰ continuous in the continuity conditions at the interface between layers. Effects of the difference of displacement continuity conditions between the three-dimensional layerwise theory and the global higher-order theory are clarified in thermal buckling problems of multilayered composite plates.     

Shape from Shading with Interreflections Under a Proximal Light Source: Distortion-Free Copying of an Unfolded Book

We address the problem of recovering the 3D shape of an unfolded book surface from the shading information in a scanner image. This shape-from-shading problem in a real world environment is made difficult by a proximal, moving light source, interreflections, specular reflections, and a nonuniform albedo distribution. Taking all these factors into account, we formulate the problem as an iterative, non-linear optimization problem. Piecewise polynomial models of the 3D shape and albedo distribution are introduced to efficiently and stably compute the shape in practice. Finally, we propose a method to restore the distorted scanner image based on the reconstructed 3D shape. The image restoration experiments for real book surfaces demonstrate that much of the geometric and photometric distortions are removed by our method.     

Asymmetric Multidimensional Scaling of Brand Switching Among Margarine Brands

Behaviormetrika - Brand switching data among 12 margarine brands were analyzed by the asymmetric multidimensional scaling based on the singular value decomposition. A two-dimensional result was...     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

Augmented reality-based block piling game with superimposed collapse prediction

Understanding what cannot be seen is difficult. Physical behavior can be explained on the basis of physical theories even if the behavior cannot be observed. Explanation of what is physically happening in the real world would become easy, however, if annotations were superimposed on the real objects. Herein, the authors demonstrate how an understanding of a physical event can be facilitated by overlapping a real-world situation with a simulation that predicts a future state. This idea is demonstrated in a game application in which a player stacks blocks into a pile until it collapses. In general, it is easy to estimate whether a block on the edge of a table will fall or not. However, it is more difficult to predict whether a stack of many blocks will collapse, and in what manner the stack will collapse. Even though previous research has demonstrated that the problem of how two-dimensionally stacked blocks collapse can be reduced to solving a sequence of convex quadratic programs, algorithms for convex quadratic programs require massive computational resources. Hence, the authors developed a fast and new algorithm based on a linear program. The proposed algorithm realizes real-time simulation based on physics that superimposes predicted collapse. The block that is predicted to fall is superimposed on the real block with a lit background projection. The system was evaluated in an experiment, and superimposed augmented reality annotation was observed to be efficient. The system was also demonstrated in game contests and received positive feedback and comments.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.