Electricity production from twelve monosaccharides using microbial fuel cells

Direct generation of electricity from monosaccharides of lignocellulosic biomass was examined using air cathode microbial fuel cells (MFCs). Electricity was generated from all carbon sources tested, including six hexoses (d-glucose, d-galactose, d(−)-levulose (fructose), l-fucose, l-rhamnose, and d-mannose), three pentoses (d-xylose, d(−)-arabinose, and d(−)-ribose), two uronic acids (d-galacturonic acid and d-glucuronic acid) and one aldonic acid (d-gluconic acid). The mixed bacterial culture, which was enriched using acetate as a carbon source, adapted well to all carbon sources tested, although the adaptation times varied from 1 to 70 h. The maximum power density obtained from these carbon sources ranged from 1240 ± 10 to 2770 ± 30 mW m⁻² at current density range of 0.76–1.18 mA cm⁻². d-Mannose resulted in the lowest maximum power density, whereas d-glucuronic acid generated the highest one. Coulombic efficiency ranged from 21 to 37%. For all carbon sources tested, the relationship between the maximum voltage output and the substrate concentration appeared to follow saturation kinetics at 120 Ω external resistance. The estimated maximum voltage output ranged between 0.26 and 0.44 V and half-saturation kinetic constants ranged from 111 to 725 mg L⁻¹. Chemical oxygen demand (COD) removal was over 80% for all carbon sources tested. Results from this study indicated that lignocellulosic biomass-derived monosaccharides might be a suitable resource for electricity generation using MFC technology.     

Adaptive random access algorithm with improved delay performance

We propose an adaptive random access algorithm for mobile environments with capture. The algorithm has a dynamic window size which is updated according to the traffic intensity. The packet arrival rate is tracked by employing sequential detection procedures. Simulations indicate that reducing the window size adaptively under heavy load conditions improves the average delay significantly. Copyright © 2001 John Wiley & Sons, Ltd.     

Statistical Design of Low Power Square-Law CMOS Cells for High Yield

A robust design of low voltage low power square law CMOS composite cells using statistical VLSI design techniques is presented. Since random device/process variations do not scale down with feature size or supply voltage, the statistical design of low voltage circuits is essential in order to keep functional yields of low voltage circuits at levels that are competitive and cost effective. The Response Surface Methodology and Design of Experiment techniques were used as statistical techniques. This article shows that statistical techniques will result in area/layout optimization which will enhance functional yield of low voltage analog ICs.     

Impacts of impregnation with Timbercare Aqua on the red and yellow color tone of some woods and varnishes

This study has been performed for determining the effects of impregnation with Timbercare Aqua (Tc) on the red and yellow color tone of some woods and varnishes. For this purpose, the test samples prepared from Oriental beech, European oak, Scotch pine, Oriental spruce, and Uludag fir woods, which met the requirements of ASTM D 358, was impregnated with Tc according to ASTM D 1413 and producer's definition. After impregnation, wood surfaces have been coated by Sayerlack parquet varnish (Sp), Sayerlack interior varnish (Si), and Sayerlack exterior varnish (Se) varnishes in accordance with the ASTM D 3023 standards. According to ASTM D 2244, the red and yellow color tone of samples after varnishing process was determined. As a result, the value of red color tone was the highest in Oriental beech (15.21) and the lowest in Uludag fir (5.38). For the wood material, impregnation material, and varnish interaction, the red color tone value was the highest in Oriental beech + Tc + Sp (18.43) and the lowest in Uludag fir + Tc + Si (3.92). The value of the yellow color tone was the highest in pine (34.45) and the lowest in Oriental beech (26.50). For the wood material, impregnation material, and varnish interaction, the yellow color tone value was the highest in Oriental spruce + Tc + Sp (42.12) and the lowest in Oriental beech + Tc + Si (21.47). This effect may be due to the impacts of impregnation chemical on wood extractives and color pigments in varnish. Accordingly, it should be taken into care for applications where the red and yellow color tone value is important. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Estimation of thermal and flow fields due to natural convection using support vector machines (SVM) in a porous cavity with discrete heat sources

Support vector machines (SVM), a soft programming technique, has been used to estimate the temperature distribution and flow fields in a square porous enclosure heated discretely by three isothermal heaters from the left vertical wall. Right vertical wall of the cavity was isothermal but it has colder temperature than the heaters while remaining walls were adiabatic. A database was prepared by solving the governing equations which were written using Darcy flow model. Using finite difference method to discretize the equation, a computational fluid dynamics (CFD) code was written. A correlation was developed between Nusselt and Rayleigh numbers. Using obtained database, further values of temperature and velocities were estimated by SVM technique at different Rayleigh numbers and locations of heater. It was observed that SVM was a useful technique on estimation of streamlines and isotherms. Thus, SVM reduces the computational time and helps to solve some cases when CFD fails to solve due to numerical instability.     

Use of multisensor and multitemporal geospatial datasets to extract the foundation characteristics of a large building: a case study

Bulletin of Engineering Geology and the Environment - The assessment of the ground conditions for large buildings is important because the results are sensitive to the ground conditions, especially...     

Performance of joint multilevel/AES‐LDPCC‐CPFSK schemes over wireless sensor networks

In wireless sensor networks, data encryption and channel coding are considered together for ensuring secure and robust communication. In order to achieve this purpose, we introduce a new joint scheme, namely ‘Multilevel/Advanced Encryption Standard‐Low Density Parity Check Coded‐Continuous Phase Frequency Shift Keying (ML/AES‐LDPCC‐CPFSK)’. AES algorithm is the most powerful and widely used symmetric key cryptography in providing secure data transmission. LDPC codes have very large Euclidean distance and use iterative decoding algorithms. In this study, we have increased error performance employing multilevel structure to AES and LDPC. In all communications systems, phase discontinuities of modulated signals result in extra bandwidth requirements. CPFSK, which is a special type of continuous phase modulation, is a powerful solution for this problem. In this paper, we simulate error performance of ML/AES‐LDPCC‐CPFSK for regular LDPC codes. Simulation results are drawn for 4CPFSK, 8CPFSK and 16CPFSK over wireless cooperative sensor networks. Using this scheme, we are able to improve bit error performance, channel throughput, security level of communication and reduction in complexity compared with related schemes such as various turbo code structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Use of Ozone in the Citrus Industry

The use of ozone for postharvest sanitation and decay control of fruits, vegetables and their products during handling, processing and storage has been investigated for commercial applications. Due to their significant contribution to world trade and human nutrition, citrus fruits are thought to be important commodities. Decay can be observed in these products because of microbial activity and ethylene accumulation throughout storage. Residues of pesticides and other compounds in citrus fruit and food-borne illness outbreaks caused by consumption of contaminated citrus juice are important health issues. In this study, the possible uses of ozone in citrus industry for all these problems, and efficacy, benefits and/or detrimental effects of these applications are discussed.     

Osteosclerosis due to endemic fluorosis

Endemic water borne fluorosis is a public health problem in Isparta, a city located in southern Turkey. In order to investigate the association between osteosclerosis and fluorosis, we retrospectively screened the results of lumbar spine and femur neck bone mineral density (BMD) of 1500 patients who were examined before, for any reason in between 2001-2003. Sixty nine patients (67 females and 2 males, mean age 52.6+/-10.2) with vertebra T-scores>or=+2 were found only except a patient with osteoid osteoma in the femur neck (femur T-score+6.64). Thirty-four of the patients could be reexamined with lateral vertebra BMD and investigated for fluorosis and the other etiologic causes of osteosclerosis. Of 34 patients, 14 had either mottled tooth enamel or urine fluoride level greater than 1.5 mg/l. Other etiologic causes were hypothyroidism (2), hypoparathyroidism (1), history of lumbar fracture (1), use of retinoids (1), vitamin D (7), oral calcium preparations (9), and bisphosphanates (3). Lateral lumbar vertebral T-score was greater than+2 in 12 patients (35.3%). Femur T-score was greater than+2 in 7 patients (20.6%). Fourteen patients (41.2%) had lateral vertebral or femur T-score>or=+2. Five (35.7%) of these patients had signs of fluorosis, as discussed before. Mean body mass index of individuals with fluorosis was 36.4+/-7.9 and this result was significantly higher than other osteosclerotic subjects (31.6+/-4.4). In conclusion we believe that approximately one third of the osteosclerosis in our region was due to endemic skeletal fluorosis and obesity may enhance this osteosclerotic type bone changes in endemic fluorosis.