Anwendung eines elektronischen Rechners für Rundstahlkalibrierungen

Unterteilung der Kalibrierung in drei Kaliberfolgen: Vorwalzung mit geringer Streckung, Kaliberfolge mit großer Streckung und Fertigwalzung. Untersuchung der verschiedenen Kaliberfolgen und Konstruktion der Kaliber. Anwendung eines Rechners.     

The lithium-sulfuryl chloride battery: Discharge behaviour

The properties of the lithium-sulfuryl chloride battery have been examined in terms of discharge performance and characteristics. The results indicate that the Li/SO₂Cl₂ system is intrinsically capable of delivering large current outputs at high voltages. Upon storage and long term discharge, however, the cell is affected by the two major polarization phenomena typical of lithium-inorganic electrolyte batteries, i.e., the passivation of the anode and the inactivation of the cathode.     

Reduced Impact of Induced Gate Noise on Inductively Degenerated LNAs in Deep Submicron CMOS Technologies

Designers of radio-frequency inductively-degenerated CMOS low-noise-amplifiers have usually not followed the guidelines for achieving minimum noise figure. Nonetheless, state-of-the-art implementations display noise figure values very close to the theoretical minimum. In this paper, we point out that this is due to the effect of the parasitic overlap capacitances in the MOS device. In particular, we show that overlap capacitances lead to a significant induced-gate-noise reduction, especially when deep sub-micron CMOS processes are used.Paolo Rossi was born in Milan, Italy, in 1975. He received the Laurea degree (summa cum laude) in electrical engineering from the University of Pavia, Pavia, Italy, in 2000, where he is currently working toward the Ph.D. degree. His research interests are in the field of analog integrated circuits for wireless transceivers in CMOS and BiCMOS technology, with particular focus on the analysis and design of LNA and mixer for multi-standard applications.Francesco Svelto received the Laurea and Ph.D. degrees in electrical engineering from the University of Pavia, Pavia, Italy, in 1991 and 1995, respectively. From 1996 to 1997, he held a grant from STMicroelectronics to design CMOS RF circuits. In 1997, he was appointed Assistant Professor at the University of Bergamo, Italy, and in 2000, he joined the University of Pavia, where he is an Associate Professor. His current research interests are in the field of RF design and high-frequency integrated circuits for telecommunications. Dr. Svelto has been a member of the technical program committee of the IEEE Custom Integrated Circuits Conference since 2000 and the Bipolar/BiCMOS Circuits and Technology Meeting (BCTM) since 2003, and the European Solid State Circuits Conference in 2002. He served as Guest Editor of the March 2003 special issue of the IEEE Journal of Solid-State Circuits, of which he is currently an Associate Editor.Andrea Mazzanti was born in Modena (Italy) in 1976. He received the Laurea degree (summa cum Laude) in Electrical Engineering from the University of Modena and Reggio Emilia, Modena, Italy in 2001. Since 2001 he is pursuing his PhD in Electrical Engineering at University of Modena and Reggio Emilia, Italy. His major research interest are modelling of microwave semiconductor devices and design of CMOS RF integrated circuits, with particular focus on low noise oscillators and analog frequency dividers. During the summer of 2003 he was with Agere Systems, Allentown, PA as an internship student, working on the design of an highly integrated CMOS FM transmitter.Pietro Andreani received the M.S.E.E. from the University of Pisa, Italy, in 1988. He joined the Dept. of Applied Electronics, Lund University, Sweden, in 1990, where he contributed to the development of software tools for digital ASIC design. After working at the Dept. of Applied Electronics, University of Pisa, as a CMOS IC designer during 1994, he rejoined the Dept. of Applied Electronics in Lund as an Associate Professor, where he was responsible for the analog IC course package between 1995 and 2001, and where he received the Ph.D. degree in 1999. He is currently a Professor at the Center for Physical Electronics, ØrstedDTU, Technical University of Denmark, Kgs. Lyngby, Denmark, with analog/RF CMOS IC design as main research field.     

Monitoring food quality by microfluidic electrophoresis, gas chromatography, and mass spectrometry techniques: effects of aquaculture on the sea bass (Dicentrarchus labrax)

Monitoring food quality is a critical task for analytical chemistry and an important way to preserve human health. Fish is a valuable source of highly digestible proteins and contains large amounts of polyunsaturated fatty acids and fat-soluble vitamins. Since the world's wild fish stocks are limited, farmed fish is nowadays proposed as an alternative to consumers. It is now emerging that the fish muscle protein content is assuming great importance from an aquaculture perspective. Many data have been collected on the physiology and biochemistry of fish muscle, but few proteomic studies are available on farmed fish. Application of proteomics to aquaculture may play a key role in the development of new farming strategies. In this paper, a proteomic approach based on SDS-PAGE separation of proteins, in situ protein hydrolysis, de novo sequencing of peptides by MALDI and ESI MS(2), protein identification, and relative quantitation of protein by denaturing capillary electrophoresis was coupled with the determination of fatty acids and metal ions content by GM-MS and ICPMS in farmed and wild sea bass filet. Our results show that aquaculture could induce significant chemical and biochemical differences in fish muscle that may have an impact on food quality.     

Evaluation of advanced glycation end products and carbonyl compounds in patients with different conditions of oxidative stress

Advanced glycation end products (AGE) and dicarbonyl compounds accumulate in serum and tissues of patients with diabetes and chronic renal failure. Pentosidine, free pentosidine, glyoxal and methylglyoxal have been evaluated in plasma of diabetic patients with poor metabolic control at baseline and after the improvement of glycemic levels, and in plasma and peritoneal dialysate of patients with renal failure before and after 12 h of peritoneal dialysis. In diabetic patients, acceptable metabolic control was unable to normalize levels of pentosidine (after 2 and 10 months), glyoxal and methylglyoxal (after 2 months). In patients with end-stage renal disease, mean values of pentosidine, free pentosidine, glyoxal and methylglyoxal decreased in plasma after dialysis. No pentosidine or free pentosidine were present in the peritoneal dialysate at time 0, but were found after 12 h of peritoneal dialysis; glyoxal and methylglyoxal decreased after 12 h of dialysis. So, glyoxal and methylglyoxal, already present in the dialysis fluid, can react with the peritoneal matrix protein, giving a reason for the gradual loss of peritoneal membrane function often observed in patients undergoing long-term peritoneal dialysis.     

A criterion for experimental validation of slip-flow models for incompressible rarefied gases through microchannels

This paper is devoted to analysing the friction factor for incompressible rarefied gas flow through microchannels. A theoretical investigation is conducted in order to underline the conditions for experimentally evidencing rarefaction effects on the pressure drop. It is demonstrated that for a fixed geometry of the microchannel cross-section, it is possible to calculate the minimum value of the Knudsen number for which the rarefaction effects can be observed experimentally, taking into account the uncertainties related to evaluation of the friction factor.     

Comparison and electrical modeling of new polymeric cellular electrets

A new family of cellular polymers-that, upon appropriate charging, reveals interesting piezoelectric properties-has been developed recently. Its major characteristic is thermal stability up to high temperatures, which broadens the potential field of application. These materials become electrets upon charging under high levels of electric field. Investigation of charging mechanisms is fundamental to reach optimization of electret and piezoelectric properties. This paper presents results and considerations relevant to contact charging of these new materials, pointing out the relation between partial discharge and space charge formation, as well as time and temperature stability of electret properties. The concepts of threshold for partial discharge inception and space charge accumulation, the modeling of avalanches in cavities, and the rate of charge generation are exploited trying to explain charging mechanism and, therefore, they provide useful indication for optimization of material manufacturing.