Microstructural and mechanical changes by chemical ageing of glazed ceramic surfaces

In the present work, several ceramic tiles, characterised by different glazes, were considered in order to define the role played by the glassy and crystalline phases on the leaching mechanisms and the deterioration of the mechanical properties. The glazed working surfaces were subjected to chemical attack by using a strong basic solution and the chemical analysis of the leached solutions was performed. Before and after the chemical attack, the glazed surfaces of the samples were analysed from both the microstructural and mechanical point of view. In this context, the microstructure was observed by SEM and analysed by X-ray diffraction. In order to define other possible changes, roughness measurements, Vickers hardness and micro-scratch tests were also performed.The results made it possible to deepen the understanding of the mechanisms of elements release caused by the chemical attack and their implications on microstructural and mechanical degradation of the working surface of glazed ceramic tiles.     

Sintered esseneite–wollastonite–plagioclase glass–ceramics from vitrified waste

Dense sintered esseneite–wollastonite–plagioclase glass–ceramics have been successfully prepared from a vitrified mixture of important inorganic waste (Bayer process red mud, fly ash from lignite combustion and residues from the polishing of porcelain stoneware tiles). The enhanced nucleation activity of fine glass powders, favoured by particular oxidation conditions, caused a substantial crystallisation, even in the case of very rapid thermal treatments at 900 °C, which led to remarkable mechanical properties (bending strength and Vickers micro-hardness exceeding 130 MPa and 7 GPa, respectively) and a promising chemical durability.     

Formulative Study and Intracellular Fate Evaluation of Ethosomes and Transethosomes for Vitamin D3 Delivery

In this pilot study, ethosomes and transethosomes were investigated as potential delivery systems for cholecalciferol (vitamin D3), whose deficiency has been correlated to many disorders such as dermatological diseases, systemic infections, cancer and sarcopenia. A formulative study on the influence of pharmaceutically acceptable ionic and non-ionic surfactants allowed the preparation of different transethosomes. In vitro cytotoxicity was evaluated in different cell types representative of epithelial, connective and muscle tissue. Then, the selected nanocarriers were further investigated at light and transmission electron microscopy to evaluate their uptake and intracellular fate. Both ethosomes and transethosomes proven to have physicochemical properties optimal for transdermal penetration and efficient vitamin D3 loading; moreover, nanocarriers were easily internalized by all cell types, although they followed distinct intracellular fates: ethosomes persisted for long times inside the cytoplasm, without inducing subcellular alteration, while transethosomes underwent rapid degradation giving rise to an intracellular accumulation of lipids. These basic results provide a solid scientific background to in vivo investigations aimed at exploring the efficacy of vitamin D3 transdermal administration in different experimental and pathological conditions.     

Grid computing for electromagnetics: a beginner's guide with applications

The demand for computing power in computational electromagnetics (CEM) is continuously increasing. Meanwhile, cooperative engineering is becoming more and more present in daily research and development workflows. Projects are often developed by teams, which interact remotely, and need tighter and tighter connectivity. Grid computing (GC), from the perspective of progress in computer networks, seems a promising way to satisfy both the need of high-performance computing platforms, and the requirements for effective cooperative computing. In this paper, researchers involved in CEM are introduced to grid computing, and to the use of grid computing for CEM. Two real applications are proposed, with a critical discussion on potential benefits and drawbacks with respect to alternative strategies.     

Percutaneous blind needle biopsy versus combined laparoscopic excisional and guided needle biopsy in the diagnosis of liver disorders in pediatric patients

A special interest, both in scientific publications and in the mass media, is recently emerged about the use of hormone replacement therapy (HRT) in post-menopausal women. Beside, in fact, the specific indication for the relief of menopausal symptoms, hypotheses are debated about a possible role of HRT in the reduction of risk of osteoporosis and cardiovascular diseases, and in the increased risk of breast cancer. This situation emphasizes the need for assessing the benefit/risk profile for HRT in order to ensure that strategies of proven clinical effectiveness, based on large randomized clinical trials, will be adopted in the population.     

Transient liquid phase bonding of HfC-based ceramics

Transient liquid phase (TLP) bonding enables joining at lower temperatures than traditional bonding techniques and preserves the potential for high-temperature applications, making it particularly attractive for joining ultra-high-temperature ceramics (UHTCs) such as carbides and borides. The feasibility of a TLP joint between “pure” carbides has been recently demonstrated. The present study examines the interactions that occur between undoped HfC or MoSi₂-doped HfC and a Ni/Nb/Ni multilayer interlayer during TLP bonding. Bonding is performed at 1400 °C for 30 min in a high-vacuum furnace. SEM–EDS characterization shows that the reaction layer formed at the interlayer/ceramic interface contains mixed carbides and depending upon the ceramic, Ni–Nb–Hf, or Ni–Nb–Hf–Si, or Ni–Nb–Si alloys. Nanoindentation tests traversing the reaction layer between the bulk ceramic and Nb foil midplane also show a clear transition zone across which the indentation modulus and hardness vary. Crack-free joints have been obtained with undoped HfC. The addition of 5 vol% MoSi₂ introduces small (<5 μm long) isolated cracks within the reaction layer, whereas with 15 vol% MoSi₂ added, cracking was pervasive within the reaction layer. When the reaction layer exceeds a critical thickness, as in the case of the bond obtained with HfC doped with 15 vol% MoSi₂, residual stresses become sufficiently large to cause extensive cracking and bond failure. The results suggest a need to characterize and balance the positive role of additives on sintering with the potentially deleterious role they may have on joining.     

Adaptive response: modelling and experimental studies

Adaptive response (AR) is a term that has been generally accepted to describe the ability of a low 'priming' radiation dose to decrease the cell response to a subsequent higher 'challenging' dose. The main proposed mechanisms to explain AR are: increased efficiency of DNA repair and induction of antioxidant enzymes. A model that considers a modulation of the efficiency of DNA repair activity and of the level of antioxidant enzymes, starting from the framework of a lethal-potentially lethal (LPL) model is proposed. The LPL model has been extended with the inclusion of the dynamic variables representing the efficiency of repair, the levels of radiation induced radicals and of antioxidant enzymes. The model used here is able to describe the protective effect of a priming dose. Moreover, in agreement with the data in the literature, the simulations show that the AR happens in given priming dose and priming dose-rate ranges only, and requires at least 4 h to develop. In order to get more insights into the role of cell-cell communication as factors affecting the AR, experimental studies were planned using sparse or confluent AG1522 cell monolayer. The results obtained after gamma irradiation suggest that cell density is a crucial factor for observing an AR.     

Experimental features affecting the transparency of YAG ceramics

This article focuses on the importance of the ceramic production process for the final transparency and overall optical quality of materials to be used as laser hosts. YAG-based ceramics are prepared starting from commercial powders. The materials are prepared by reactive sintering in a clean atmosphere and under high vacuum. Nd or Yb are selected as active elements as the more appropriate for high energy and high peak power lasers. The powder type and treatment and the solvent removal technique are described in detail as well as the experimental conditions adopted during shaping. The influence of the pre-sintering and sintering cycles on the reaction among the involved oxides and on the microstructure after sintering is shown. The optical characterization is also reported.