攀长特节能减排措施探讨

通过分析攀长钢能源管理存在的不足和困难,从强化员工节能意识、合理组织生产、优化生产工艺、充分使用循环水、完善计量器具、加强余热利用及优化能源管理机制等方面入手提出节能改进措施,具有一定的现实意义。     

无失效数据机载多余度EWIS可靠性研究

针对高可靠度机载多余度EWIS各组成部分寿命服从指数分布但参数未知的情况，提出采用无失效数据可靠度分析方法评估EWIS的可靠度水平。通过Monte-Carlo仿真方法对连接形式为“先并联、后串联”EWIS各组成部分寿命进行抽样，利用“最小最大值”方法获得系统寿命的抽样值，用概率纸检验法初步判断EWIS寿命是否服从威布尔分布，再用Pearson拟合优度检验法判断EWIS寿命是否服从威布尔分布。结合无故障飞行时间的样本值与EWIS寿命服从威布尔分布的假设，采用无失效数据分析方法评估EWIS的可靠度水平。研究方法对机载多余度EWIS无失效数据可靠度分析有一定的贡献。     

射频电缆的幅相稳定性测试研究

对射频电缆幅相稳定性进行了介绍,阐述了射频测试电缆相位和幅度变化的因素,并详细分析了射频电缆相位性能以及幅度性能的不同测试方法,最后通过实测数据的展示,总结说明了在日常测试中该如何正确使用测试电缆。     

超分子作用阻尼材料的动态力学模型修正

为提高飞机起落架载荷实测精度，以支柱式起落架结构为研究对象，探讨处理其载荷标定数据的工程方法。首先，对实际受载情况和单向加载工况标定数据的分析，挖掘出三向载荷、缓冲支柱压缩行程与应变码值间的数学关系，将预测的数学关系代入到多向工况的标定数据中，验证了它们的准确性;其次，根据两种标定数据回归方法，提出了对应使用的支柱式起落架载荷-应变标定方程的数学模型;最后，将两种标定方程代回到标定数据中，计算起落架三向载荷，所有反算载荷的误差均在可控范围内，表明标定方程满足精度要求。将标定方程代入实测数据中，实测曲线符合变化规律。该处理方法的应用能有力提高支柱式起落架的起飞-着陆载荷实测和载荷谱编制的准确度。     

Effect of CuSO4 on the Hydromechanical Behavior of Compacted Tailings

Laboratory tests, including compressibility, permeability, and microstructure tests, were conducted on tailings samples using custom-designed test apparatus to investigate the effect of metal contamination (Cu²⁺) on the hydromechanical behavior of compacted tailings. Infiltrating samples with various dry densities with distilled water or CuSO₄ solution at various concentrations showed that the void ratio of compacted tailings decreased with increased dry density. An increase in the metal contaminant concentrations from 0 to 0.1 mol/L increased the compression coefficient of the tailings from 0.14 to 0.84 MPa^?1 under a vertical load of 0.01 to 2.0 MPa, while the yield stress of the tailings decreased from 204.3 to 98.7 kPa, respectively. The linear relationship between permeability coefficient (k) and void ratio (e) is described by k?=???6.48?+?17.17e. Microstructure test results showed that the diffusion double layer thinned, and the surface potential decreased, indicating that the contaminant of Cu²⁺ enhanced the compressibility and permeability of the tailings. The microstructure test results also showed that the amount of fine-grained soil in the copper tailings was significantly less after the hydromechanical test. Therefore, the permeability and compressibility of copper tailings increased. The experimental results are in good agreement with the estimated results.

     

Study of MW-scale biogas-fed SOFC-WGS-TSA-PEMFC hybrid power technology as distributed energy system: Thermodynamic,exergetic and thermo-economic evaluation

Advanced biogas power generation technology has been attracting attentions, which contributes to the waste disposal and the mitigation of greenhouse gas emissions. This work proposes and models a novel biogas-fed hybrid power generation system consisting of solid oxide fuel cell, water gas shift reaction, thermal swing adsorption and proton exchange membrane fuel cell (SOFC-WGS-TSA-PEMFC). The thermodynamic, exergetic, and thermo-economic analyses of this hybrid system for power generation were conducted to comprehensively evaluate its performance. It was found that the novel biogas-fed hybrid system has a gross energy conversion efficiency of 68.63% and exergy efficiency of 65.36%, indicating high efficiency for this kind of hybrid power technology. The market sensitivity analysis showed that the hybrid system also has a low sensitivity to market price fluctuation. Under the current subsidy level for the distributed biogas power plant, the levelized cost of energy can be lowered to 0.02942 $/kWh for a 1 MW scale system. Accordingly, the payback period and annual return on investment can reach 1.4 year and about 20%, respectively. These results reveal that the proposed hybrid system is promising and economically feasible as a distributed power plant, especially for the small power scale (no more than 2 MW).     

矿用无人卡车国内外研究现状及关键技术

分析了国内外露天矿山用卡车无人驾驶技术发展现状,详细介绍了露天矿山卡车无人驾驶关键技术;通过分析对比前装线控和后装线控两种技术路线的优缺点以及超声波雷达、毫米波雷达、激光雷达、4D光场智能感知系统、红外传感器、视觉传感器等环境感知技术的优缺点;提出多传感器高度融合将是露天矿山卡车实现全天候环境感知的发展方向。通过分析对比惯性导航系统、GNSS差分定位技术、车联网定位技术、电子地图定位技术、视觉传感器等定位导航技术的差异,指出多定位技术融合是露天矿山无人驾驶卡车定位方式的必然选择。结合露天煤矿的生产实际,提出将现有的无人驾驶各种技术算法与露天矿山标准作业流程有机融合是实现卡车无人驾驶的必由之路。最后指出无人驾驶卡车应用5G技术是露天矿山安全生产的关键和核心,是无人驾驶的必备技术。     

关于提升装载机电子秤检定结果测量准确度的探讨

装载机电子秤广泛应用于货场、建筑工地,如何使检定结果准确可靠,本文对自动衡器检定装置标准器量值的管理方法进行了一些探讨。     

BIM技术在地下工程中的应用分析及展望

BIM技术以三维设计为基础,以数字信息为载体,将建筑信息贯穿于建筑的全生命周期中。然而由于地下工程的内部结构较为复杂,受地质条件影响较大,BIM技术在地下工程中的应用并不多见。叙述了BIM技术在隧道、地铁和矿井建设几种地下工程中应用的现状,并对几个典型案例进行分析,指出了BIM技术在地上工程和地下工程中应用的异同。最后,提出了目前BIM技术在地下工程中应用的问题以及对未来发展的建议。为推动BIM在我国地下工程中更广泛深入的应用提供重要参考价值。     

基于壳聚糖多孔碳的制备及电容性能研究

以壳聚糖为碳源和氮源,采用预碳化处理和KOH活化两步法制备了壳聚糖多孔碳材料,考察了活化剂KOH用量对电极材料形貌、结构以及电容性能的影响。结果表明:当KOH与预碳化壳聚糖质量比为0.6∶1时,制备的多孔碳材料KOH-CTS-0.6具有最优的电化学性能。KOH-CTS-0.6具有大比表面积(1 348 m~2·g~(-1)),含有丰富的N、O元素(2.9%N和7.4%O)。在电流密度为0.5 A·g~(-1)时,KOH-CTS-0.6的比电容为235.2 F·g~(-1),显示出优秀的倍率能力;在电流密度为10 A·g~(-1)的大电流时,其比电容依然高达178.6 F·g~(-1)。此外,该材料还具有良好的循环稳定性,500次循环后比电容保持率为94%。