一氯胺消毒剂检测新技术及应用

讨论了传统一氯胺测定方法在应用中的局限性,并介绍了一种新的检测技术.实际应用表明该技术可以使水厂饮用水消毒中产生尽可能多的一氯胺,还可以使污水处理厂出水消毒中一氯胺的检测精确,而不受有机氯胺、亚硝酸盐和锰的干扰;帮助水厂控制过量投加氯和氨,从而降低成本.     

改性生物质作为型煤黏结剂的研究

探讨了用NaOH改性生物质秸秆作为型煤黏结剂的可行性,考察了NaOH溶液浓度对生物质改性的影响以及生物质添加量、无机物(MgO和MgCl2)添加量对型煤机械强度、防水性能和着火温度的影响。研究结果表明,NaOH改性液的质量分数为1.0%~2.0%时,制得的生物质型煤有较高的机械强度;生物质添加量在2%~20%时,随生物质添加量的增加,机械强度增加,着火温度降低,但防水性较差;而在生物质型煤中加入适量无机黏结剂后,型煤有很高的浸水强度,表现出优越的防水性能。     

Structural study of cubic pyrochlores based on quantum mechanical simulation

In the ideal A₂B₂O₆O′ pyrochlore structure, the x-value of O atom position is a variable parameter. In Bi_1.5ZnNb_1.5−xTa_xO₇ (BZNT) cubic pyrochlores, the x-values alter with the different compositions of Nb/Ta. In this work, a series of initial models for BZNT were established by analyzing X-ray diffraction data. Then three structure modifying methods, including Rietveld refinement, Rietveld refinement with energy and geometry optimization based on quantum mechanics, were employed to obtain the precise models using Materials Studio. Moreover, the reflectivities of BZNT were computed by quantum mechanical simulation based on the refined models. Comparing the simulation results from different modifying models with the experimental results, it is found that Rietveld refinement with energy optimization is the most accurate method for BZNT pyrochlores. According to the simulation results, the different reflectivities correspond well with various x-values of O atom positions in BZNT pyrochlores.     

冲击响应谱在惯导减振防冲设计中的应用

根据冲击原理,研究惯导减振系统在半正弦冲击激励下的响应特性,绘制了惯导系统在半正弦冲击激励下的冲击响应谱图。根据冲击响应谱图,可为惯导系统防冲设计提供正确、有效的理论依据,同时,为使减振器同时具备减振、防冲两种性能,冲击响应谱对于减振器关键参数选择、减振系统优化也具有重要应用价值。最后文章依据该研究结论,对某惯导系统进行了实际设计计算。     

富氧燃烧技术在梭式窑中的应用

研究了富氧燃烧技术对梭式窑烧成的影响.研究结果表明,随着氧浓度从21%-30%的逐渐增加,CO总浓度和NO总浓度都先明显下降,后缓慢上升;节能效果在初始段较为明显,而后效果不明显;而实际烟气量与氧浓度成反比,与过剩空气系数成正比.     

Online and Offline Rotary Regression Analysis of Torque Estimator for Switched Reluctance Motor Drives

A new torque estimator for switched reluctance motor (SRM) drives based on 2-D rotary regression analysis is presented in this paper. The proposed torque estimator is composed of a bicubic regressive polynomial as a function of rotor position and input current. The regressive coefficients can be computed offline or online from the torque characteristics acquired either experimentally or from numerical computation. Furthermore, a torque estimation method by taking mutual coupling into consideration is proposed. It can be seen that the estimated and experimentally obtained self-coupling and mutual-coupling torque characteristics are in good agreement with each other. In addition, the dynamic torque waveforms with and without the mutual coupling, estimated by the proposed estimator, are found to be virtually the same as those obtained from the bicubic spline interpolation for SRM drives with single-pulse voltage, hysteresis current chopping, as well as with voltage pulse width modulation control. The success of all the case studies being reported is a good validation of the usefulness and accuracy of the proposed real-time torque estimator that, as described in this paper, can be used to quickly estimate the instantaneous output torque of SRM drives.     

Synthesis and Characterizations of Triphenylamine End-Functionalized Polymers via Reversible Addition-Fragmentation Chain Transfer Polymerization

A novel reversible addition-fragmentation chain transfer (RAFT) reagent bearing triphenylamine (TPA) group, 4-diphenylamino-dithiobenzoic acid benzyl ester (DDABE), was designed and synthesized. It was used in the RAFT polymerizations of styrene (St) and methyl acrylate (MA) to prepare end-functionalized polymers. The results of the polymerization showed that the RAFT polymerizations could be well controlled using DDABE as the RAFT agent. Number-average molecular weight (M_n,GPC) increased linearly with monomer conversion, and molecular weight distributions were relatively narrow (PDI< 1.50). The results of chain-extension reaction, ¹H NMR spectra and UV/Vis spectra confirmed that most of the polymers chains were end-capped by the functional triphenylamine (TPA) groups. The effect of feed molar ratios of St/DDABE/AIBN on polymerization was investigated.     

Preparation and Compressive Stress Effect of Polymer Matrix RE-Fe Giant Magnetostrictive Composite

Polymer matrix RE-Fe giant magnetostrictire composite （GMPC） was prepared using bonding and magnetic field forming technique, and magnetostriction of samples was measured for different compressive stress. The experimental results show thai there is certain compressive effect in GMPC. And the influence of compressive stress on magnetostriction of sample was investigated. It offers essential reference for application and device design of GMPC.     

中央空调系统制冷主机房建设中的几项节能措施

中央空调系统由制冷主机房、水子系统、风子系统以及楼宇自控（BA）等部分组成。制冷主机房是中央空调系统的心脏部分，它是由若干台制冷主机，一次冷冻水子系统，二次冷冻水子系统、冷却水子系统、冷却塔、控制柜等组成。它的运行状况直接关系到中央空调系统的能耗，本文将叙述新锦江大酒店制冷主机房建设中的几点节能措施。     

大唐移动TD-SCDMA大容量拉远型宏基站——轻松实现TD无线完美覆盖

1 3G组网中的主要问题 1．1 机房选址困难 随着我国2G网络的多年扩容和优化，未来3G基站机房无论是与2G共站还是新建，在城市里符合要求的可用机房储备都非常有限。移动网络80％的话务量集中在大中城市的密集城区，而3G网络特征业务——数据业务也主要发生在这些站址资源稀缺的区域。对于原固网运营商，此问题将更加突出。因此如何降低机房要求，减少配套投资将是网络建设中各界关注的焦点。