新疆三塘湖盆地侏罗系煤有机地球化学特征

有机地球化学和有机岩石学研究结果表明，新疆三塘湖盆地侏罗系煤中富集孢子体和角质体（３．０％～６．０％，全岩体积百分比），对煤中氯仿沥青“Ａ”组成中较高的总烃馏分（３０％～５０％）和饱芳比（０．６～３．０）产生了影响。煤的聚集环境是影响煤的显微组分组成及生油特性的关键因素。三塘湖盆地侏罗系煤属于“晚生晚排”叠加有“早生早排”类型的烃源岩。     

小高层剪力墙结构开洞设计探讨

小高层建筑需通过剪力墙开洞(结构开洞)降低侧向刚度,本文对开洞部位以及墙肢和连梁设计提出一些看法,供设计人员参考。     

北京火车站抗震鉴定与加固技术

北京火车站是首都重要的标志性建筑之一 ,195 9年建成 ,当时按 7度设防考虑 ,存在着许多不符合抗震要求的问题 ,一些设施也明显不能满足现代使用功能要求。北京火车站抗震加固与改造设计项目组 ,运用多种先进的加固手段 ,在保持原建筑外貌不变的前提下 ,实现了抗震能力和改善使用功能的协调 ,取得了大型公共建筑加固改造的新经验     

云龙水库大坝表面变形观测资料分析

1工程概况云龙水库是昆明市掌鸠河引水供水工程的水源工程,位于昆明市西北部禄劝县的云龙乡岔河村附近,距昆明市区约86km。大坝坝址选在金沙江水系二级支流掌鸠河上游峡谷河段内,初期规模正常蓄水位2087.97m,校核洪水位2091.98m;终期规模水库正常蓄水位2089.67m,设计洪水位2092.59m,校核洪水位2093.58m。初期规模总库容4.48亿m3,终期规模总库容4.84亿m3,属大(2)型水库工程,工程等别为Ⅱ。水库枢纽建筑物由大坝,泄洪、导流隧洞,引水隧洞,溢洪道等组成。除溢洪道按初期规模兴建外,其余枢纽建筑物均按终期规模兴建。泄洪、导流和引水建筑物布置…     

生产尾管固井技术优化及其在渤中25-1油田中深丛式井的应用

渤中25-1油田沙河街组油藏属于中深层高温高压油藏,制约了常规尾管固井技术的应用。对生产尾管固井技术进行了优化,解决了中深丛式井生产尾管固井作业安全、质量与时效之间的矛盾,实现了非钻机时间候凝和电测固井质量,显著提高了钻井作业时效。该项技术成果对于渤海中深层油田的开发具有重要意义。     

教育与处罚相结合加强灌区水行政执法力度

在灌区的日常水行政执法过程中,普遍存在两种错误倾向:一种认为,水行政执法手段不硬,于是执法人员在执法过程中无所作为,只对当事人进行教育,甚至采取漠视不管的态度;另一种则认为,既然是执法就讲不得情面,执法人员遇到水事案件就不视具体的案情环境,不问清详细的情由,一罚了之。显然,这两种倾向都是错误和有害的。作为水行政执法人员,在处理水事案件中应当坚持教育与处罚相结合,依法管护水利工程。     

高职高专电工学课程教学改革

针对高职高专培养应用型人才的要求，分析了目前电工学课程教学的现状，提出了电工学课程改革方案。     

Efficiency improvement of near-ultraviolet InGaN LEDs using patterned sapphire substrates

The use of conventional and patterned sapphire substrates (PSSs) to fabricate InGaN-based near-ultraviolet (410 nm) light-emitting diodes (LEDs) was demonstrated. The PSS was prepared using a periodic hole pattern (diameter: 3 /spl mu/m; spacing: 3 /spl mu/m) on the (0001) sapphire with different etching depths. From transmission-electron-microscopy and etch-pit-density studies, the PSS with an optimum pattern depth (D/sub h/=1.5 /spl mu/m) was confirmed to be an efficient way to reduce the thread dislocations in the GaN microstructure. It was found that the output power increased from 8.6 to 10.4 mW, corresponding to about 29% increases in the external quantum efficiency. However, the internal quantum efficiency (@ 20 mA) was about 36% and 38% for the conventional and PSS LEDs, respectively. The achieved improvement of the output power is not only due to the improvement of the internal quantum efficiency upon decreasing the dislocation density, but also due to the enhancement of the extraction efficiency using the PSS. Finally, better long-time reliability of the PSS LED performance was observed.     

低阶煤煤层气富集模式初探

通过对美国粉河盆地以及我国铁法盆地煤层气富集规律的解剖,总结出影响低阶煤煤层气富集的关键因素是封堵,而构造、岩性和水动力是形成煤层气封堵的主要因素。同时提出了5种不同的煤层气富集模式,即背斜模式、构造—水动力模式、构造—岩性模式、岩性—水动力模式和岩性模式。     

Thermal and mechanical properties of epoxy composites reinforced by a natural hydrophobic sand

If a low weight percentage of crude fine fillers can improve properties of polymer materials directly without complicated chemical treatment process involved, it will be significant for many industrial applications. Our previous study indicated that a kind of Cancun natural sand could be an effective filler material for polymer composites. In this current work, the epoxy composites reinforced by this kind of natural sand particles were prepared and thermal and mechanical properties of the composites containing up to 5 wt % of the sand particles were characterized. Results showed that the highest flexural strength appears in the epoxy composite containing 1 wt % sand particles. A damage model was used to interpret the flexural properties, which showed an acceptable agreement with the experimental results. The glass transition temperature, high temperature storage modulus, and dimensional stability of the sand/epoxy composites monotonically increased with the addition of the sand particles. The sand particle/epoxy composites also displayed a noticeable enhancement in thermal conductivity. Theoretical analysis showed that in addition to conduction, other heat transport mechanisms played roles in the improved heat transmission through the composites. As a natural porous micron-scale material, Cancun sand has the potential for applications in cost-effective composites with enhanced mechanical and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008