Dimensional scaling for impact cratering and perforation

The issue of generic scaling laws able to adequately predict (within better than 20%) cratering in semi-infinite targets and perforations through finite thickness targets was revisited. The approach used was to apply physical logic for hydrodynamics in a consistent manner able to account for chunky-body impacts such that the only variables needed are those directly related to known material properties for both the impactor and target. The analyses were compared and verified versus CTH hydrodynamic code calculations and existing experimental data. Comparisons with previous scaling laws were also performed to identify which (if any) were good for generic purposes. This paper is a short synopsis of the full report [1] available through the NASA Langley Research Center, LDEF Science Office.     

Encountering misspellings and spelling performance: Why wrong isn't right.

Experience with misspellings can be detrimental to subsequent spelling performance. Generating or being exposed to incorrect spellings between two successive spelling tests interfered with subsequent spelling accuracy of these same words in Experiments 1 and 2 (but not Experiment 3), as indicated by changes from correct to incorrect spellings (CI changes). Furthermore, significantly more CI changes occurred when a recognition test (with incorrect versions as distractors) followed a dictation test than when a second dictation test followed it. Repeatedly presented misspellings were rated as looking progressively more similar to the correct spelling across presentations (Experiment 3). These outcomes suggest that spelling tests that involve the discrimination of correct from incorrect versions may be ill advised. In addition, the instructional technique encouraging students to intentionally produce misspellings of words, for purposes of visual comparison, may be detrimental rather than helpful. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The relative effects of transection of the gustatory branches of the seventh and ninth cranial nerves on NaCl taste detection in rats.

Chorda tympani nerve (CT) transection in rats severely impairs NaCl taste detection. These rats can detect higher concentrations of NaCl, however, suggesting that remaining oral nerves maintain some salt sensibility. Rats were tested in a gustometer with a 2-response operant taste-detection task before and after sham surgery (n = 5), combined transection of the CT and the greater superficial petrosal nerves (GSP; 7x, n = 6), or transection of the glossopharyngeal nerve (GL; 9x, n = 4). Thresholds did not significantly change after sham surgery. Although the GL responds to NaCl and innervates nearly 60% of total taste buds, 9x surgery had no effect. However, 7x surgery increased NaCl detection threshold by ～2.5 log?? units, greater than that reported for CT transection alone. These results suggest that the GSP contributes to NaCl sensitivity in rats and also demonstrate that the GL and perhaps the superior laryngeal and lingual nerve proper can maintain some NaCl detectability at high concentrations. These findings confirm the primacy of the 7th nerve relative to the 9th nerve in sensibility of NaCl in the rat model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Gender moderates the relationship between testosterone and marital interaction.

Higher testosterone levels are related to assertiveness and dominance. Given the relevance of those behavioral correlates to spouses' daily transactions, links between testosterone levels and marital interaction were explored among 92 newlywed couples. Marital problem-solving and social support transactions were assessed, and saliva was collected and assayed for testosterone. Whether marital behavior was related to husbands' and wives' testosterone levels was examined. The link between spouses' testosterone and their behavior was contingent on the partner's testosterone levels. Husbands exhibited more adaptive problem-solving behaviors and social support provision when husbands and wives were concordant for lower testosterone levels. In contrast, wives exhibited more adaptive support provision when spouses had discordant testosterone levels such that wives had higher levels and husbands had lower levels. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Aspects of three-dimensional constrained Delaunay meshing

Presented in this paper are the theoretical aspects of node addition to a non-convex, multiboundary mesh of tetrahedral elements as used in finite element modelling. The method used is derived from Watson¹ and Shenton and Cendes² and is extended to deal with node addition on inter-material boundaries. Several situations are identified that result in an illegal insertion polyhedron (IP), these could be caused by the ‘constrained’ nature of the mesh, adjacent objects with different material properties, or degenerate node configurations. A new Delaunay algorithm is described that checks for illegal cases of the IP and then corrects them, this checking relies on the consistent ordering of the element nodes. It is shown that a particular type of illegal IP can easily be identified and corrected using this technique. The Delaunay algorithm is then applied to automatic mesh generation, and modification to the basic Delaunay algorithm is described so that previously meshed edges and faces of the current object being meshed are not deleted during the addition of subsequent nodes. This ‘protection’ method only becomes viable by recognizing the node ordering sense of the IP faces.     

NMR characterization of penetrants in high permeability polymers

Spectra of xenon-129 sorbed into two high permeability polymers are reported. The polymers are the copolymer of tetrafluoroethylene and 2,2-bis(trifluoromethyl)-4,5-difluoro-1,3-dioxole as well as poly(1-trimethylsilyl-1-propyne). At room temperature, the xenon-129 shifts are smaller than in conventional glassy polymers. The smaller xenon-129 shift indicates the presence of larger sorption sites in high permeability polymers relative to conventional polymers. The temperature dependence of solubility in these polymers is drastically different from the behavior in conventional polymers. There is a rapid exponential increase in solubility in high permeability polymers as temperature decreases corresponding to a large negative enthalpy change on sorption and it is this increase in solubility which leads to a large increase in shift with decreasing temperature. Pulse field gradient (PFG) determinations of the self-diffusion constant are made for xenon, propane, pentane and a decafluoropentane in the copolymer. Rapid diffusion is observed as well as a dependence of the apparent diffusion constant on the time scale of the PFG experiment. The translational mobility of smaller simpler moieties depends less on the time scale or equivalently, the length scale of observation in the PFG NMR experiment. For larger, more complex species, the interconnectedness of high free volume domains plays a role in reducing the apparent diffusion constant as the time of measurement increases.     

Melt filtration of recycled PVC

The separation of PVC from contaminants is one of the most important steps in recycling PVC. Earlier works have shown that one can separate PVC from other polymers by using the X-ray fluorescence technique. However, in many cases, even after careful separation, there is a remaining impurity level of about 0.1% due to the limitations of the separation processes. In many applications, impurities, particularly nonmeltables, cause defects in the PVC matrix and must be removed for best performance and appearance. Melt filtration appears to be the best technique to remove the nonmeltable impurities.     

Efficient solution of population balance equations with discontinuities by finite elements

Two refinements of Galerkin's method on finite elements were evaluated for the solution of population balance equations for precipitation systems. The traditional drawbacks of this approach have been the time required for computation of the two-dimensional integrals arising from the aggregation integrals and the difficulty in handling discontinuities that often arise in simulations of seeded reactors. The careful arrangement of invariant integrals for separable aggregation models allows for a thousandfold reduction in the computational costs. Discontinuities that may be present due to the hyperbolic nature of the system may be specifically tracked by the method of characteristics. These discontinuities will arise only from the initial distribution or nucleation and are readily identified. A combination of these techniques can be used that is intermediate in computational cost while still allowing discontinuous number densities. In a case study of calcium carbonate precipitation, it is found that the accuracy improvement gained by tracking the slope discontinuity may not be significant and that the computation speed may be sufficient for dynamic online optimization.     

Effect of processing conditions on the yield and failure response of an aliphatic polyketone terpolymer

The effect of processing conditions on the yield and failure behavior of an aliphatic polyketone terpolymer was studied. Testing and characterization were performed on samples that were extruded in the form of hollow cylinders. We performed the extrusion process at different shear rates and at different cooling rates to assess the effect that process conditions had on the polymer properties. We performed biaxial testing on the samples to characterize the failure envelopes, including the ductile–brittle transition condition for each process condition. The effect of shear rate was negligible, whereas the cooling rate significantly affected the failure behavior. To explain these differences in behavior, we performed characterization via differential scanning calorimetry, wide‐angle X‐ray diffraction, attenuated total reflection IR spectroscopy, dynamic mechanical thermal analysis, scanning electron microscopy, and residual stress measurements. A broad glass transition was found for all samples at temperatures higher than previously reported for this material. Alteration of the processing conditions did not influence the crystalline phase (percentage crystallinity, crystalline orientation, crystallite size, etc.). A change in spherulitic structure was also observed with altered cooling rate and is suggested to have contributed to the change in failure behavior. Residual stresses also affected the behavior of all samples. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 318–334, 2002; DOI 10.1002/app.10334     

Alternative Granulation Technique: Melt Granulation

A melt granulation process has been investigated (1, 2) which efficiently agglomerates pharmaceutical powders for use in both immediate- and sustained-release solid dosage forms. The process utilizes materials that are effective as granulating fluids when they are in the molten state. Cooling of the agglomerated powders and the resultant solidification of the molten materials completes the granulation process. Both the molten agglomeration and cooling solidification were accomplished in a high shear Collette Gral mixer equipped with a jacketed bowl. Hence, the melt granulation process replaces the conventional granulation and drying operations which use water or alcohol solutions. The melt granulation process has been investigated using immediate- and sustained-release TAVIST® (clemastine fumarate USP) tablet formulations. The TAVIST granulations have been characterized by power consumption monitoring, measurement of the granulation particle size distribution, bulk and tapped density determinations, and loss-on-drying measurements. Scale-up of the melt granulation process for the sustained release TAVIST tablet formulation was judged successful based on a comparison of the hardness, friability, weight uniformity during compression, disintegration time, and dissolution rate data obtained at different manufacturing scales.