Hazardous impact of toxic metals on tobacco leaves grown in contaminated soil by ultrasonic assisted pseudo-digestion: multivariate study

Tobacco leaves (Nicotiana tabacum L.), agricultural soil and pollute irrigated lake water samples were collected during 2005–2006 and analyzed for Cd and Ni by electrothermal atomic absorption spectrometry (ETAAS). A simple and efficient procedure was investigated for the complete decomposition of tobacco leaves using ultrasonic assisted acid pseudo-digestion method (UPDM). A Plackett–Burman experimental design was used as a multivariate strategy for the evaluation of seven factors/variables at once, while central composite were used to found optimum values of significant variables. The accuracy of the proposed methods was assessed by analyzing certified reference (CRM); Virginia tobacco leaves (CTA-VTL-2). The results being compared with those obtained by conventional wet acid digestion method. The result obtained by optimized method showed good agreement with the certified values and sufficiently high recovery 97.8 and 98.7% for Cd and Ni, respectively. Under optimal conditions, the detection limits (3σ) were evaluated to be 0.019 μg g⁻¹ for Cd and 0.37 μg g⁻¹ for Ni. The proposed method was successfully applied to the determination of Cd and Ni in raw, processed tobacco and different branded cigarettes samples.     

Wild melon: a novel non-edible feedstock for bioenergy

In the present research work, a non-edible oil source Cucumis melo var. agrestis(wild melon) was systematically identified and studied for biodiesel production and its characterization. The extracted oil was 29.1% of total dry seed weight. The free fatty acid value of the oil was found to be 0.64%, and the single-step alkaline transesterification method was used for conversion of fatty acids into their respective methyl esters. The maximum conversion efficiency of fatty acids was obtained at 0.4 wt% Na OH(used as catalyst), 30%(methanol to oil, v/v) methanol amount, 60 ℃ reaction temperature,600-rpm agitation rate and 60-min reaction time. Under these optimal conditions, the conversion efficiency of fatty acid was 92%. However, in the case of KOH as catalyst, the highest conversion(85%) of fatty acids was obtained at 40%methanol to oil ratio, 1.28 wt% KOH, 60 ℃ reaction temperature, 600-rpm agitation rate and 45 min of reaction time.Qualitatively, biodiesel was characterized through Fourier transform infrared spectroscopy(FTIR) and gas chromatography and mass spectroscopy(GC–MS). FTIR results demonstrated a strong peak at 1742 cm~(-1), showing carbonyl groups(C=O)of methyl esters. However, GC–MS results showed the presence of twelve methyl esters comprised of lauric acid, myristic acid, palmitic acid, non-decanoic acid, hexadecanoic acid, octadecadienoic acid and octadecynoic acid. The fuel properties were found to fall within the range recommended by the international biodiesel standard, i.e., American Society of Testing Materials(ASTM): flash point of 91 ℃, density of 0.873 kg/L, viscosity of 5.35 c St, pour point of-13 ℃, cloud point of-10 ℃, total acid number of 0.242 mg KOH/g and sulfur content of 0.0043 wt%. The present work concluded the potential of wild melon seed oil as excellent non-edible source of bioenergy.     

Selecting and prioritizing key factors for CAD/CAM software in small- and medium-sized enterprises using AHP

In today’s fast-paced world, computer-aided design/computer-aided manufacturing (CAD/CAM) systems have become a necessary element in manufacturing industries. Prior to investment in a CAD/CAM system, it is essential for investor to know how to maximize their benefits from buying a new or by changing an existing CAD/CAM system. The purpose of this study is to provide a methodology to assist small- and medium-sized manufacturing companies of Pakistan in selecting a CAD/CAM system. It will also facilitate the software providers in recognizing the current state of affairs as well as preceding problems regarding the application of CAD/CAM in manufacturing firms when assisting them in choosing the direction for future development simultaneously. To accomplish this purpose, data have been collected about current CAD/CAM systems. Important criteria for system selection and parameters for evaluation have also been identified and prioritized. Analytic hierarchy process (AHP) is used as a decision-making technique for identifying and prioritizing important factors for CAD/CAM software selection. Expert Choice (AHP-based software) has been used to validate the results.     

Nanostructured materials with biomimetic recognition abilities for chemical sensing

Binding features found in biological systems can be implemented into man-made materials to design nanostructured artificial receptor matrices which are suitable, e.g., for chemical sensing applications. A range of different non-covalent interactions can be utilized based on the chemical properties of the respective analyte. One example is the formation of coordinative bonds between a polymerizable ligand (e.g., N-vinyl-2-pyrrolidone) and a metal ion (e.g., Cu(II)). Optimized molecularly imprinted sensor layers lead to selectivity factors of at least 2 compared to other bivalent ions. In the same way, H-bonds can be utilized for such sensing purposes, as shown in the case of Escherichia coli. The respective molecularly imprinted polymer leads to the selectivity factor of more than 5 between the W and B strains, respectively. Furthermore, nanoparticles with optimized Pearson hardness allow for designing sensors to detect organic thiols in air. The ‘harder’ MoS₂ yields only about 40% of the signals towards octane thiol as compared to the ‘softer’ Cu₂S. However, both materials strongly prefer molecules with -SH functionality over others, such as hydrocarbon chains. Finally, selectivity studies with wheat germ agglutinin (WGA) reveal that artificial receptors yield selectivities between WGA and bovine serum albumin that are only about a factor of 2 which is smaller than natural ligands.     

Heavy metal accumulation in different varieties of wheat (Triticum aestivum L.) grown in soil amended with domestic sewage sludge

The concentrations of heavy metals (HMs) in plants served to indicate the metal contamination status of the site, and also revealed the abilities of various plant species to take up and accumulate them from the soil dressed with sewage sludge. A study to comprehend the mobility and transport of HMs from soil and soil amended with untreated sewage sludge to different newly breaded varieties of wheat (Anmol, TJ-83, Abadgar and Mehran-89) in Pakistan. A pot-culture experiment was conducted to study the transfer of HMs to wheat grains, grown in soil (control) and soil amended with sewage sludge (test samples). The total and ethylenediaminetetraaceticacid (EDTA)-extractable HMs in agricultural soil and soil amended with domestic sewage sludge (SDWS) and wheat grains were analysed by flame atomic absorption spectrometer/electrothermal atomic absorption spectrometer, prior to microwave-assisted wet acid digestion method. The edible part of wheat plants (grains) from test samples presented high concentration of all HMs understudy (mgkg(-1)). Significant correlations were found between metals in exchangeable fractions of soil and SDWS, with total metals in control and test samples of wheat grains. The bio-concentration factors of all HMs were high in grains of two wheat varieties, TJ-83 and Mehran-89, as compared to other varieties, Anmol and Abadgar grown in the same agricultural plots.     

Foliar epidermal anatomy of some selected wild edible fruits of Pakistan using light microscopy and scanning electron microscopy

The present study is focused on the detailed foliar epidermal anatomy of some selected wild edible fruits (WEFs) from Pakistan using light microscopy (LM) and scanning electron microscopy (SEM). The studied species are Ficus racemosa L., Solanum nigrum L., Capparis spinosa L., Physalis divaricata D.Don, Rosa moschata Herrm. and Ribes orientale Desf. collected from various localities of Pakistan. The objective of the present study is to investigate qualitative and quantitative anatomical characters for the identification and differentiation of collected wild edible fruits. The characters studied are shape and size of epidermal cells, anticlinal wall pattern, trichome type and shape, average number of stomata, length and width of stomata and pore. The detailed microscopic investigation and variations in the characters recorded have a key role in the determination and authentication of wild edible fruits. This study possesses great potential for plant taxonomists to further evaluate the species at molecular and genetic levels.     

A systematic literature review on the detection of smells and their evolution in object-oriented and service-oriented systems

This systematic literature review paper investigates the key techniques employed to identify smells in different paradigms of software engineering from object-oriented (OO) to service-oriented (SO). In this review, we want to identify commonalities and differences in the identification of smells in OO and SO systems. Our research method relies on an automatic search from the relevant digital libraries to find the studies published since January 2000 on smells until December 2017. We have conducted a pilot and author-based search that allows us to select the 78 most relevant studies after applying inclusion and exclusion criteria. We evaluated the studies based on the smell detection techniques and the evolution of different methodologies in OO and SO. Among the 78 relevant studies selected, we have identified six different studies in which linguistic source code analysis received less attention from the researchers as compared to the static source code analysis. Smells like the yo-yo problem, unnamed coupling, intensive coupling, and interface bloat received considerably less attention in the literature. We also identified a catalog of 30 smells infrequently reported for SO systems and that require further attention. Moreover, a suite of 20 smells reported for SO systems can also be detected using static source code metrics in OO. Finally, our review highlighted three major research trends that are further subdivided into 20 research patterns initiating the detection of smells toward their correction.     

Quality assurance and authentication of herbal drug (Argyrolobium roseum and Viola stocksii) through comparative light and scanning electron microscopy

The quality assurance and authentication of crude herbal drugs play important role in the effective therapeutic effect of herbal drug and their products. There are many reported problems in quality assurance of herbal crude drugs concerning to their correct identification. The present study was designed with the aim to document the authentication and quality assurance of the herbal crude drugs (Argyrolobium roseum and Viola stocksii) thorough light microscopy (LM) and scanning electron microscopy (SEM). The detailed foliar anatomical studies showed polygonal epidermal cells having anticlinal walls in Argyrolobium roseum while rounded epidermal cells were observed in Viola stocksii. The anomocytic stomata type was observed in Argrolobium roseum while actinocytic was noticed in Viola stocksii. The pollen of studied species appeared as tricolporate showing reticulate exine sculpturing in Argrolobium roseum while fine perforations were recorded in Viola stocksii. Furthermore, quantitative analysis of phenols, flavonoids, and antioxidant activity showed high flavonoid and phenol content in Argyrolobium roseum as compared with Viola stocksii. It was observed that Argyrolobium roseum was discriminated from the Viola stocksii based on the leaf and pollen micromorphological traits by using LM and SEM techniques. It was concluded that LM and SEM techniques were found useful for the quality assurance of botanicals and their authentication.