Legal and institutional perplexities hampering the implementation of urban development plans in Pakistan

The effective implementation of development plans requires functioning institutions with well defined legal support and good plans. This article explains how legal and regulatory frameworks as well as the institutional capacities of local planning agencies (LPAs), including Cantonment Boards (CBs), City District Governments (CDGs), Town Municipal Administration (TMAs) and Development Authorities (DA), in Pakistan confound and affect the implementation of development plans. A comparative review of existing Acts, Ordinances and urban planning frameworks in place at various levels was conducted, and inconsistencies and gaps that impart perplexities amongst the aforementioned institutions and regulatory frameworks were identified. The overlapping powers and functions of the institutions which have legal backing must be eliminated to ensure effective implementation of urban development plans.     

Extraction of optimized parameters for Si0.6Ge0.4 material and SPP mode propagation through Si0.6Ge0.4/Ag/Si0.6Ge0.4 waveguide

The Lorentz model and modified Debye model （MDM） parameters forSi0.6Ge0.4 are presented. A nonlinear optimiza- tion algorithm is developed. The obtained parameters are used to determine the complex relative permittivity of Si0.6Ge0.4, and compared with the experimental data for validation. Finally the obtained parameters are used to analyze the properties of symmetric surface plasmon polariton （SPP） mode propagation in a dielectric-metal-dielectric （DMD） material constructed with silver （Ag） and Si0.6Ge0.4 for further verifying the extracted parameters.     

Physicochemical properties of aqueous solutions of sodium glycinate in the non-precipitation regime from 298.15 to 343.15 K

The physicochemical properties, including the density, viscosity, and refractive index of aqueous solutions of sodium glycinate as a solvent for CO2 absorption in the non-precipitation regime were measured under the wide temperature range of 298.15 to 343.15 K. The concentration of the sodium glycinate in an aqueous form in the non-precipitation regime was identified up to 2.0 mol·L?1. The coefficients of thermal expansion values were estimated from measured density data. It was found that, the densities, viscosities and refractive indices of the aqueous sodium glycinate decrease with an increase in temperature, whereas with increasing sodium glycinate concentration in the solution, all three properties increase. Thermal expansion coefficients slightly increase with rising temperature and concentration. The measured values of density, viscosity and refractive index were correlated as a function of temperature by using the least squares method. The predicted data obtained from correlation equations for all measured properties were in fairly good agreement with the experimental data.     

Scanning Electron Microscopy (SEM) and Light Microscopy (LM)‐based Palyno‐morphological views of Solanaceae in Western Himalaya

In this study, plants belonging to family Solanaceae growing in Western Himalaya region have been observed palynologically under Light Microscope and Scanning electron microscope. Present investigation comprises of 10 genera and 23 species, namely, Atropa acuminata, Capsicum decoraticus, Capsicum frutescens, Cestrum aurantiacum, Cestrum diurnum, Cestrum nocturnum, Datura alba, Datura innoxia, Datura stramonium, Hyoscymus niger, Lycopersicon esculentum, Nicotiana rustica, Nicotiana tabacum, Petunia alba, Petunia hybrida, Solanum erianthum, Solanum melongena, Solanum miniatum, Solanum pseudocapsicum, Solanum surratense, Solanum tuberosum, Withania coagulans, Withania somnifera. Solanaceae is a eurypalynous family. Grains are usually Tricolporate and Tetracolporate, radially symmetrical, isopolar, prolate‐spheroidal to oblate‐spheroidal to oblate‐spheroidal to subprolate to per prolate or suboblate to oblate, size range: 8.55–72 μm, amb circular, semi‐angular or subangular, aperture drop‐type, labrum common‐type, exine usually 2 μm thick, nexine 1–1.5 μm thick. Tectum usually psilate, sexine reticulate, granulate or striato‐reticulate, with obscure pattern, sexine 1–2 μm thick, nexine 1–1.5 μm thick, and intine 0.5–1 μm thick. Most striking variation has been found in the shape class, aperture‐type, and tectal surface. Based on these characters, taxonomic keys have been made for correct identification of members in Solanaceae. However, the grains of this family are usually tricolporate and have direct relationship with certain members of the family Scrophulariaceae. Palyno‐morphological characters of family Solanaceae have been studied for the first time in Western Himalayan region of Pakistan. These palyno‐morphological characters are significant for identification of the members of family Solanaceae.     

Citric acid enhances the phytoextraction of manganese and plant growth by alleviating the ultrastructural damages in Juncus effusus L.

Chelate-assisted phytoextraction by high biomass producing plant species enhances the removal of heavy metals from polluted environments. In this regard, Juncus effusus a wetland plant has great potential. This study evaluated the effects of elevated levels of manganese (Mn) on the vegetative growth, Mn uptake and antioxidant enzymes in J. effusus. We also studied the role of citric acid and EDTA on improving metal accumulation, plant growth and Mn toxicity stress alleviation. Three-week-old plantlets of J. effusus were subjected to various treatments in the hydroponics as: Mn (50, 100 and 500 μM) alone, Mn (500 μM) + citric acid (5 mM), and Mn (500 μM) + EDTA (5 mM). After 2 weeks of treatment, higher Mn concentrations significantly reduced the plant biomass and height. Both citric acid and EDTA restored the plant height as it was reduced at the highest Mn level. Only the citric acid (but not EDTA) was able to recover the plant biomass weight, which was also obvious from the microscopic visualization of mesophyll cells. There was a concentration dependent increase in Mn uptake in J. effusus plants, and relatively more deposition in roots compared to aerial parts. Although both EDTA and citric acid caused significant increase in Mn accumulation; however, the Mn translocation was enhanced markedly by EDTA. Elevated levels of Mn augmented the oxidative stress, which was evident from changes in the activities of antioxidative enzymes in plant shoots. Raised levels of lipid peroxidation and variable changes in the activities of antioxidant enzymes were recorded under Mn stress. Electron microscopic images revealed several modifications in the plants at cellular and sub-cellular level due to the oxidative damage induced by Mn. Changes in cell shape and size, chloroplast swelling, increased number of plastoglobuli and disruption of thylakoid were noticed. However, these plants showed a high degree of tolerance against Mn toxicity stress, and it removed substantial amounts of Mn from the media. The EDTA best enhanced the Mn uptake and translocation, while citric acid best recovered the plant growth.     

Accumulation of arsenic in different fresh water fish species – potential contribution to high arsenic intakes

The aim of the study was to evaluate total arsenic (As) in five tissues (gills, mouthpiece, intestine, liver and muscles) of 10 fish species caught from As contaminated Manchar Lake (26°3′N: 67°6′E) Sindh Pakistan during 2006–2007. The total As concentration was determined by hydride generation atomic absorption spectrometry (HG-AAS), prior to microwave assisted acid digestion. The certified reference material DORM-2 (dogfish muscle) was used to check the quality control of the technique. The good agreement with the certified value at 95% confidence limit confirmed the validity of As determination method. The limit of detection (LOD) and limit of quantitation (LOQ) of As were 0.034 and 0.11 μg/g, respectively.     

The Impact of Nonthermal Technologies on the Microbiological Quality of Juices: A Review

Fruit and vegetable juices are rich sources of nutrients that support microbiological growth and ultimately undergo rapid deterioration of safety and quality. The loss of nutritional quality of juices due to intensive thermal processing is a major problem encountered during the treatment of commercially preserved liquid foods. Conventional thermal processing technologies inactivate microorganisms and enzymes and extend the shelf life of foods but exert negative effects on nutritional and organoleptic properties of juices, for example, a loss of vitamins, of a desirable flavor, and of bioactive compounds and development of different sensory profiles as a result of heating. Nonthermal technologies including ultrasonication, a pulsed electric field, high‐pressure processing, irradiation, and their combinations are suitable alternatives for achieving the same preservation effect without the adverse effects of heat on the quality of juices and meet consumer demand for clean‐label, safe, and wholesome products without compromising their nutritional properties.     

A Methodology for Developing Maintenance Policy for Automated Manufacturing Plants

ｉｃｙ ｆｏｒ Ａｕｔｏｍａｔｅｄ Ｍａｎｕｆａｃｔｕｒｉｎｇ ＰｌａｎｔｓTX１ＩｎｔｒｏｄｕｃｔｉｏｎＭａｎｕｆａｃｔｕｒｉｎｇｉｎｄｕｓｔｒｙｈａｓｐｒｏｇｒｅｓｅｄｔｈｒｏｕｇｈｄｉｆｅｒｅｎｔｓｔａｇｅｓｏｆｍｅｃｈａｎｉｚａｔｉｏｎ，ａｕｔ...     

Application of ceramic film as means of lubrication for forming of Ti sheet in a highly localized deformation process

Incremental forming is a novel die-less sheet forming process. There is a need for special means to retain lubricant at the tool/sheet interface during forming. To fulfillthe stated aim, a porous ceramic film was developed on pure Ti substrate, and it was done through an electrochemical depsition process known as plasma electrolytic oxidation. The film with preferred pore size could be realized after several attempts by varying the processing parameters. In order to characterize the film, a variety of tests including rnicrostructure, film-substrate bond strength and tribological properties tests were conducted. On-job performance of the film was also examined by forming Ti components employing a range of forming conditions. It was found that the proposed method of lubrication was effective, and the plasma eletrolytic oxidation process can be employed to fabricate films on pure Ti sheet to provide means of lubrication during incremental forming.