Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Using the analytic network process (ANP) in a SWOT analysis - A case study for a textile firm

Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis does not provide an analytical means to determine the importance of the identified factors or the ability to assess decision alternatives according to these factors. Although the analysis successfully pinpoints the factors, individual factors are usually described briefly and very generally. For this reason, SWOT analysis possesses deficiencies in the measurement and evaluation steps. Although the analytic hierarchy process (AHP) technique removes these deficiencies, it does not allow for measurement of the possible dependencies among the factors. The AHP method assumes that the factors presented in the hierarchical structure are independent; however, this assumption may be inappropriate in light of certain internal and external environmental effects. Therefore, it is necessary to employ a form of SWOT analysis that measures and takes into account the possible dependency among the factors. This paper demonstrates a process for quantitative SWOT analysis that can be performed even when there is dependence among strategic factors. The proposed algorithm uses the analytic network process (ANP), which allows measurement of the dependency among the strategic factors, as well as AHP, which is based on the independence between the factors. Dependency among the SWOT factors is observed to effect the strategic and sub-factor weights, as well as to change the strategy priorities.     

An investigation of some Schiff bases as corrosion inhibitors for austenitic chromium–nickel steel in H2SO4

The corrosion inhibition of austenitic chromium–nickel steel by two Schiff bases, N-(1-toluidine)salicylaldimine and N-(2-hydroxyphenyl)salicylaldimine, was investigated in sulphuric acid medium. The effect of concentration and temperature on inhibition properties was determined. It was found that when the concentrations of inhibitor were increased the inhibition efficiencies () and surface coverage () increased. Some thermodynamic parameters such as free energy of adsorption, G _ads, and enthalpy, H, were determined for the Schiff bases. Experimental results agree with the Temkin isotherm for N-(1-toluidine)salicylaldimine, but the Langmuir isotherm is more appropriate for N-(2-hydroxyphenyl)salicylaldimine.     

Removal of metal ions using lignite in aqueous solution—Low cost biosorbents

Turkish lignite can be used as a new adsorption material for removing some toxic metals from aqueous solution. The adsorption of lignite (brown young coals) to remove copper (Cu²⁺), lead (Pb²⁺), and nickel (Ni²⁺) from aqueous solutions was studied as a function of pH, contact time, metal concentration and temperature. Adsorption equilibrium was achieved between 40 and 70 min for all studied cations except Pb²⁺, which is between 10 and 30 min. The adsorption capacities are 17.8 mg/g for Cu²⁺, 56.7 mg/g for Pb²⁺, 13.0 mg/g for Ni²⁺ for BC₁ (Ilg?n lignite) and 18.9 mg/g for Cu²⁺, 68.5 mg/g for Pb²⁺, 12.0 mg/g for Ni²⁺ for BC₂ (Beysehir lignite) and 7.2 mg/g for Cu²⁺, 62.3 mg/g for Pb²⁺, 5.4 mg/g for Ni²⁺ for AC (activated carbon). More than 67% of studied cations were removed by BC₁ and 60% BC₂, respectively from aqueous solution in single step. Whereas about 30% of studied cations except Pb²⁺, which is 90%, were removed by activated carbon. Effective removal of metal ions was demonstrated at pH values of 3.8–5.5. The adsorption isotherms were measured at 20 °C, using adsorptive solutions at the optimum pH value to determine the adsorption capacity. The Langmuir adsorption isotherm was used to describe observed sorption phenomena. The rise in temperature caused a slight decrease in the value of the equilibrium constant (K_c) for the sorption of metal ions. The mechanism for cations removal by the lignite includes ion exchange, complexation and sorption. The process is very efficient especially in the case of low concentrations of pollutants in aqueous solution, where common methods are either economically unfavorable or technically complicated.     

Chemical,thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

Polyethylene terephthalate (PET)/nano-hydroxyapatite (nHAp) composite granules were obtained using twin-screw extruder. Preforms were prepared by injection molding and then PET/nHAp bottles were produced by blow molding. For PET bottles with nHAp, the migration amounts of carboxylic acid (COOH), acetaldehyde (AA), diethylene glycol (DEG), and isophthalic acid (IPA); glass transition temperature (T_g); melting temperature (T_m); and the maximum crystallization temperature (T_cry) were measured. The load-carrying capacity, burst strength, stress cracking, and regional material distribution tests were carried out on the bottles. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and ultraviolet transmittance analyses were conducted to explain the changes in mechanical, chemical, physical properties, and light transmission of bottles. It was found out that the COOH amount increased and the AA content decreased with increasing nHAp amount. On the other hand, no change was observed in the amounts of DEG and IPA. Although the mechanical properties such as load-carrying capacity and burst strength of the bottles have improved, it has been determined that the standard environmental stress crack resistance test procedure cannot be applied to such a composite. Experimental findings indicate that nHAp disrupts the chemical structure of PET and it isolates harmful chemicals such as AA by forming intermolecular bonds. Moreover, with the addition of up to 0.8% nHAp, PET bottles block the light transmission approximately 80% within 400–700 nm wave length zone. The study demonstrates that the PET/nHAp composite bottles can be used in the food industry, particularly in the packaging of milk and milk products which are vulnerable to light exposure.     

Fair referee assignments for professional football leagues

Assignment of referees to football games is an important problem faced in professional football leagues. Despite its importance, the problem has received limited academic attention. This paper presents a model and analysis of the problem for fair referee assignments, and develops a constructive heuristic and a local search procedure for its solution. Results from an extensive computational study show that the methods are effective in solving the problem in a second of computation time and yielding an excellent solution quality.     

Searching for Complex Human Activities with No Visual Examples

We describe a method of representing human activities that allows a collection of motions to be queried without examples, using a simple and effective query language. Our approach is based on units of activity at segments of the body, that can be composed across space and across the body to produce complex queries. The presence of search units is inferred automatically by tracking the body, lifting the tracks to 3D and comparing to models trained using motion capture data. Our models of short time scale limb behaviour are built using labelled motion capture set. We show results for a large range of queries applied to a collection of complex motion and activity. We compare with discriminative methods applied to tracker data; our method offers significantly improved performance. We show experimental evidence that our method is robust to view direction and is unaffected by some important changes of clothing.     

Interpretation of MR images using self-organizing maps and knowledge-based expert systems

A new image segmentation system is presented to automatically segment and label brain magnetic resonance (MR) images to show normal and abnormal brain tissues using self-organizing maps (SOM) and knowledge-based expert systems. Elements of a feature vector are formed by image intensities, first-order features, texture features extracted from gray-level co-occurrence matrix and multiscale features. This feature vector is used as an input to the SOM. SOM is used to over segment images and a knowledge-based expert system is used to join and label the segments. Spatial distributions of segments extracted from the SOM are also considered as well as gray level properties. Segments are labeled as background, skull, white matter, gray matter, cerebrospinal fluid (CSF) and suspicious regions.     

Integrated Risk of Progress-Based Costs and Schedule Delays in Construction Projects

This article aims to explore the impact of the integration of risk factors into delayed milestones for construction projects. A simulation model was developed to determine the impact of schedule variability on cost estimation. To generate random scenarios a Monte Carlo Simulation (MCS) technique was applied. The developed model computes the cost impact of delayed milestone in the expected budget. Using a risk integration approach revealed the critical time frame that may lead to a budget deficit for a project. As a result, a number of cost-sensitive risk factors and schedule delays were identified for the critical time period where the risk of budget deficit increases. The method of integration proposed in this article highlights the priority of risk factors and schedule delays for construction contracts involving Payments at Event Occurrences (PEO). Consequently, the developed method can be useful for practitioners in anticipation of potential increase of costs, hence, prevention of failure due to budget deficit.