碳化硅晶须双重加热合成的研究

双重加热法是低成本、大批量合成碳化硅晶须的新技术，合成温度低、合成时间短、生成率高。对以炭黑和二氧化硅微粉为原料、用双重加热法合成碳化硅晶须的工艺过程进行了研究。观察了不同合成时间、合成温度和催化剂条件下的碳化硅晶须，揭示出不同工艺参数对合成的碳化硅晶须的产出率，微观形貌、直径和长度范围的影响。结果表明，催化剂的使用可以加快反应速度，提高碳化硅晶须的生成率，合成过程为VLS。实验中初步得到的最佳经济工艺参数为：Fe2O3的用量为2％，合成时间为1．5h，合成温度为1250℃。此时的该工艺条件下碳化硅晶须的生成率可达80％，晶须平均直径为0．6μm，平均长度为30μm。     

在纳米压入仪上进行悬臂梁法测量弹性模量的影响因素分析

对在纳米压入仪上进行悬臂梁法测量弹性模量的主要影响因素进行了综合分析,主要包括加载系统悬置弹簧刚度、压头压入、梁沿截面宽度方向挠曲、梁支座附加挠曲等影响。在考虑这些因素的基础上,得到了悬臂梁的有效挠度,利用有效挠度与载荷之间的关系,评价悬臂梁材料的弹性模量。对单晶硅(100)悬臂梁试样进行了实验,得到其弹性模量为155GPa±9.5%GPa,与参考文献值符合较好。表明在纳米压入仪上进行悬臂梁法测量,只有综合这些影响因素后,才能获得有效、准确的弹性模量测量结果。     

Effect of temperature on anodic behavior of 13Cr martensitic steel in CO2 environment

The corrosion behavior of 13Cr martensitic stainless steel in a CO₂ environment in a stimulated oilfield was studied with potentiodynamic polarization and the impedance spectra technique. The results showed that the microstructure of the surface scale clearly changed with temperature. This decreased the sensitivity of pitting corrosion and increased the tendency toward general (or uniform) corrosion. The capacitance, the charge transfer resistance, and the polarization resistance of the corrosion product scale decrease with increasing temperature from 90 to 120 °C, and thus the corrosion is a thermal activation controlled process. Charge transfer through the scale is difficult and the corrosion is controlled by a diffusion process at a temperature of 150 °C. Resistance charge transfer through the corrosion product layer is higher than that in the passive film.     

钛基复合材料的高周疲劳性能研究

研究了TiC粒子增强的钛基复合材料的室温轴向高周疲劳性能。测试Kt=1的试样时采用的试验频率为76Hz，R＝0．06和R＝－1时，复合材料的室温疲劳强度分别为594MPa和494MPa。试验结果表明TiC粒子增强的钛基复合材料的室温高周疲劳性能与细晶组织的Ti-6Al-4V和IMI834的相当。复合材料内含有较细小的薄片状组织，这种组织为α β相互相交错构成，这种细小的α β相间的层状组织对于阻止疲劳裂纹的扩展和提高疲劳裂纹的扩展寿命有重要作用。退火后的复合材料疲劳裂纹扩展区规则且较宽广，从而也使复合材料具有较高的疲劳强度，疲劳裂纹扩展寿命延长。     

逆向工程技术在复杂铸造模具制造中的应用

首先介绍了逆向工程技术与传统制造技术的区别,然后着重讨论利用逆向工程技术快速制造复杂铸造模具的过程及工艺路线,同时给出一些具体应用实例。最后得出与传统制造方法相比具有效率高、成本低、操作简单等优点的结论。     

电除尘(雾)器的高压供电技术及装置

阐述了用于电除尘(雾)器的几种不同高压直流电源的工作原理和特点.其中详细叙述了目前使用较多的两种电源--可控硅电源和L-C恒流电源,简要介绍了软特性准稳定直流电源、脉冲供电电源、高频开关电源、高压逆变直流电源等其它几种供电技术.     

Thermal and mechanical properties of polyhedral oligomeric silsesquioxane (POSS)/polycarbonate composites

A series of composite materials were produced incorporating polyhedral oligomeric silsesquioxane (POSS) derivatives into polycarbonate (PC), by melt blending. Significant differences in compatibility were observed depending on the nano-scale filler's specific structure: trisilanol POSS molecules generally provided better compatibility with PC than fully-saturated cage structures, and phenyl-substituted POSS grades were shown to be more compatible with PC than fillers with other functional groups. Trisilanolphenyl-POSS/PC composites possess the best overall performance among the POSS materials tested. The high compatibility between the trisilanolphenyl-POSS and polycarbonate matrix results in generation of transparent samples up to 5 wt% POSS content. Slightly enhanced mechanical properties including tensile and dynamic mechanical modulus are observed with the increase of trisilanolphenyl-POSS loading at the cost of decreasing ductility of the nanocomposites. Importantly, upon orientation of the PC/POSS nanocomposite, crystallization of POSS within the oriented material results—this observation is consistent with a growing number of observations which suggest that ‘bottom-up’ formation of structures incorporating multiple POSS cages result from orientation of these nanocomposites, and that the hybrid organic-inorganic inclusions may be at the heart of observed nano-scale reinforcement.     

CLT酸工业现状

本文介绍了CLT酸的生产技术、国内生产与市场情况，并提出了其发展方向。     

Effect of surface free energy on the adhesion of biofouling and crystalline fouling

Pipelines and heat exchangers using seawater as coolant suffer from biofouling. Biofouling not only reduces heat transfer performance significantly, but also causes considerable pressure drop, calling for higher pumping requirements. It would be much more desirable if surfaces with an inherently lower stickability for biofouling could be developed. In this paper, a cost-effective autocatalytic graded Ni-Cu-P-PTFE composite coating with corrosion-resistant properties was applied to reduce biofouling formation. The experimental results showed that the surface free energy of the Ni-Cu-P-PTFE coatings, which were altered by changing the PTFE content in the coatings, had a significant influence on the adhesion of microbial and mineral deposits. The Ni-Cu-P-PTFE coatings with defined surface free energy reduced the adhesion of these deposits significantly. The anti-bacterial mechanism of the composite coatings was explained with the extended DLVO theory.     

浓硫酸、过氧化氢催化合成糠酸甲酯

从浓Ｈ２ＳＯ４，３０％Ｈ２Ｏ２为催化剂合成糠酸甲酯，苯做萃取剂，萃取提取酯化产物，反应快，收率８３％。