The effects of container size, frequency and extended horizontal reach on maximum acceptable weights of lifting for female industrial workers

In the development of our present manual materials handling (MMH) guidelines (Snook, S.H., Ciriello, V.M., 1991. The design of manual tasks: revised tables of maximum acceptable weights and forces. Ergonomics 34, 1197-1213), the assumption was made that the effects of frequency on maximum acceptable weights (MAWs) of lifting with a large box (hand distance, 38 cm from chest) were similar to that of lifting with a small box (hand distance, 17 cm from chest). The first purpose of the present experiment was to investigate this assumption with female industrial workers. The second purpose was to study the effects of extended horizontal reach lifting (hand distance, 44.6 cm from chest) on MAWs as a confirmation of the results of a previous studies on this variable with males (Ciriello, V.M., Snook, S.H., Hughes, G.J., 1993. Further studies of psychophysically determined maximum acceptable weights and forces. Hum. Factors 35(1), 175-186; Ciriello, V.M., 2003. The effects of box size, frequency, and extended horizontal reach on maximum acceptable weights of lifting. Int. J. Ind. Ergon. 32, 115-120). Lastly, we studied the effects of high frequency (20 lifts/min) on MAWs of lifting. Ten female industrial workers performed 15 variations of lifting using our psychophysical methodology whereby the subjects were asked to select a workload they could sustain for 8h without "straining themselves or without becoming unusually tired weakened, overheated or out of breath". The results confirmed that MAWs of lifting with the large box was significantly effected by frequency. The frequency factor pattern in this study was similar to the frequency pattern from a previous study using the small box (Ciriello, V.M., Snook, S.H., 1983. A study of size distance height, and frequency effects on manual handling tasks. Hum. Factors 25(5), 473-483) for all fast frequencies down to one lift every 2 min with deviations of 7%, 15%, and 13% for the one lift every 5 and 30 min tasks and the one lift in 8h task, respectively. The effects of lifting with an extended horizontal reach decreased MAW 22% and 18% for the mid and center lift and the effects of the 20 lifts/min frequency resulted in a MAW that was 47% of a 1 lift/min MAW. Incorporating these results in future guidelines should improve the design of MMH tasks for female workers.     

Efficient and robust shot change detection

In this article, we deal with the problem of shot change detection which is of primary importance when trying to segment and abstract video sequences. Contrary to recent experiments, our aim is to elaborate a robust but very efficient (real-time even with uncompressed data) method to deal with the remaining problems related to shot change detection: illumination changes, context and data independency, and parameter settings. To do so, we have considered some adaptive threshold and derivative measures in a hue-saturation colour space. We illustrate our robust and efficient method by some experiments on news and football broadcast video sequences.

Anatomical structure modeling from medical images

Some clinical applications, such as surgical planning, require volumetric models of anatomical structures represented as a set of tetrahedra. A practical method of constructing anatomical models from medical images is presented. The method starts with a set of contours segmented from the medical images by a clinician and produces a model that has high fidelity with the contours. Unlike most modeling methods, the contours are not restricted to lie on parallel planes. The main steps are a 3D Delaunay tetrahedralization, culling of non-object tetrahedra, and refinement of the tetrahedral mesh. The result is a high-quality set of tetrahedra whose surface points are guaranteed to match the original contours. The key is to use the distance map and bit volume structures that were created along with the contours. The method is demonstrated on computed tomography, MRI and 3D ultrasound data. Models of 170,000 tetrahedra are constructed on a standard workstation in approximately 10s. A comparison with related methods is also provided.     

An efficient and generic extension to ITK to process arbitrary shaped regions of interest

The paper describes a software method to extend ITK (Insight ToolKit, supported by the National Library of Medicine), leading to ITK++. This method, which is based on the extension of the iterator design pattern, allows the processing of regions of interest with arbitrary shapes, without modifying the existing ITK code. We experimentally evaluate this work by considering the practical case of the liver vessel segmentation from CT-scan images, where it is pertinent to constrain processings to the liver area. Experimental results clearly prove the interest of this work: for instance, the anisotropic filtering of this area is performed in only 16 s with our proposed solution, while it takes 52 s using the native ITK framework. A major advantage of this method is that only add-ons are performed: this facilitates the further evaluation of ITK++ while preserving the native ITK framework.     

Justification for inclusion dependency normal form

Functional dependencies (FDs) and inclusion dependencies (INDs) are the most fundamental integrity constraints that arise in practice in relational databases. In this paper, we address the issue of normalization in the presence of FDs and INDs and, in particular, the semantic justification for an inclusion dependency normal form (IDNF), which combines the Boyce-Codd normal form with the restriction on the INDs that they be noncircular and key-based. We motivate and formalize three goals of database design in the presence of FDs and INDs: noninteraction between FDs and INDs, elimination of redundancy and update anomalies, and preservation of entity integrity. We show that (as for FDs), in the presence of INDs, being free of redundancy is equivalent to being free of update anomalies. Then, for each of these properties, we derive equivalent syntactic conditions on the database design. Individually, each of these syntactic conditions is weaker than IDNF and the restriction that an FD is not embedded in the right-hand side of an IND is common to three of the conditions. However, we also show that, for these three goals of database design to be satisfied simultaneously, IDNF is both a necessary and a sufficient condition     

Monitoring microbial population dynamics at low densities

We propose a new and simple method for the measurement of microbial concentrations in highly diluted cultures. This method is based on an analysis of the intensity fluctuations of light scattered by microbial cells under laser illumination. Two possible measurement strategies are identified and compared using simulations and measurements of the concentration of gold nanoparticles. Based on this comparison, we show that the concentration of Escherichia coli and Saccharomyces cerevisiae cultures can be easily measured in situ across a concentration range that spans five orders of magnitude. The lowest measurable concentration is three orders of magnitude (1000×) smaller than in current optical density measurements. We show further that this method can also be used to measure the concentration of fluorescent microbial cells. In practice, this new method is well suited to monitor the dynamics of population growth at early colonization of a liquid culture medium. The dynamic data thus obtained are particularly relevant for microbial ecology studies.     

Data envelopment analysis for evaluating the efficiency of genetic algorithms on solving the vehicle routing problem with soft time windows

This study proposes an alternative to the conventional empirical analysis approach for evaluating the relative efficiency of distinct combinations of algorithmic operators and/or parameter values of genetic algorithms (GAs) on solving the pickup and delivery vehicle routing problem with soft time windows (PDVRPSTW). Our approach considers each combination as a decision-making unit (DMU) and adopts data envelopment analysis (DEA) to determine the relative and cross efficiencies of each combination of GA operators and parameter values on solving the PDVRPSTW. To demonstrate the applicability and advantage of this approach, we implemented a number of combinations of GA’s three main algorithmic operators, namely selection, crossover and mutation, and employed DEA to evaluate and rank the relative efficiencies of these combinations. The numerical results show that DEA is well suited for determining the efficient combinations of GA operators. Among the combinations under consideration, the combinations using tournament selection and simple crossover are generally more efficient. The proposed approach can be adopted to evaluate the relative efficiency of other meta-heuristics, so it also contributes to the algorithm development and evaluation for solving combinatorial optimization problems from the operational research perspective.     

Cost-benefit analysis of an SLA mapping approach for defining standardized Cloud computing goods

Due to the large variety in computing resources and, consequently, the large number of different types of service level agreements (SLAs), computing resource markets face the problem of a low market liquidity. Restricting the number of different resource types to a small set of standardized computing resources seems to be the appropriate solution to counteract this problem. Standardized computing resources are defined through an SLA template. An SLA template defines the structure of an SLA, the service attributes, the names of the service attributes, and the service attribute values. However, since existing research results have only introduced static SLA templates so far, the SLA templates cannot reflect changes in user needs and market structures. To address this shortcoming, we present a novel approach of adaptive SLA matching. This approach adapts SLA templates based on SLA mappings of users. It allows Cloud users to define mappings between a public SLA template, which is available in the Cloud market, and their private SLA templates, which are used for various in-house business processes of the Cloud user. Besides showing how public SLA templates are adapted to the demand of Cloud users, we also analyze the costs and benefits of this approach. Costs are incurred every time a user has to define a new SLA mapping to a public SLA template due to its adaptation. In particular, we investigate how the costs differ with respect to the public SLA template adaptation method. The simulation results show that the use of heuristics within adaptation methods allows balancing the costs and benefits of the SLA mapping approach.     

Estimating spine shape in lateral sleep positions using silhouette-derived body shape models

This study aims at evaluating spinal alignment during sleep by combining personalized human models with mattress indentation measurements. A generic surface model has been developed that can be personalized based on anthropometric parameters derived from silhouette extraction. Shape assessment of the personalized surface models, performed by comparison with 3-D surface scans of the trunk, showed a mean unsigned distance of 9.77 mm between modeled and scanned surface meshes. The surface model is combined with an inner skeleton model, allowing the model to simulate distinct sleep postures. An automatic fitting algorithm sets the appropriate degrees of freedom to position the model on the measured indentation according to the adopted sleep posture. Validation on lateral sleep positions showed good intraclass correlations (0.73–0.88) between estimated and measured angular spinal deformations, indicating that silhouette-derived body shape models provide a valuable tool for the unobtrusive assessment of spinal alignment during sleep.Relevance to industry: A common drawback of the available techniques to assess spinal deformation on bedding systems is that they interfere with the actual sleep process. The current study presents a novel method based on silhouette-derived body shape models in order to estimate spine shape during sleep unobtrusively.