Dynamic stiffness analysis of laminated beams using a first order shear deformation theory

In this paper the exact vibration frequencies of generally laminated beams are found using a new method, including the effect of rotary inertia and shear deformations. The effect of shear in laminated beams is more significant than in homogenous beams, due to the fact that the ratio of extensional stiffness to the transverse shear stiffness is high. The exact dynamic stiffness matrix is derived, and then any set of boundary conditions including elastic connections, and assembly of members, can be solved as in the classical direct stiffness method for framed structures. The natural frequencies of vibration of a structure are those values of frequency that cause the dynamic stiffness matrix to become singular, and one can find as many frequencies as needed from the same matrix. In the paper several examples are given, and compared with results from the literature.     

Pairing Symmetry,Spin Gap,and More in HTSC Cuprates

This work is based on the double correlated linear aggregations of holes in checkerboard geometry. It is proved that the pairing function symmetry is ?d _{x2 ? y2}, as been observed experimentally. It is also shown that there is a “superconductive spin gap” for the observation of the magnetic incommensurate modulation peaks, in agreement with the experiment. In addition, the unperturbed Hamiltonian and its related propagator are reanalyzed and modified.     

Interpersonal and Print Nutrition Communication for a Spanish-Dominant Latino Population: Secretos de la Buena Vida.

Participants (N = 357) were randomly assigned to 1 of 3 conditions: lay health advisor (promotora) plus tailored print materials, tailored print materials only (tailored), or off-the-shelf print materials (control). The primary outcomes were calories from fat and daily grams of fiber. Secondary outcomes included total energy intake, total and saturated fat intake, and total carbohydrates. Adjusted for baseline values, calories from fat were 29%, 30%, and 30% for the promotora, tailored, and control conditions, respectively, and grams of fiber consumed were 16 g, 17 g, and 16 g. Significant Condition X Time interactions were not observed between baseline and 12-weeks postintervention. The LHA condition achieved significantly lower levels of energy intake, total fat and saturated fat, and total carbohydrates. The relative superiority of the promotora condition may derive from the personal touch achieved in the face-to-face interactions or from the women's use of print materials under the promotora's guidance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cutting-tool management in computer-integrated manufacturing

The problem of cutting tool management has been brought to the forefront with the emergence of computer-integrated manufacturing (CIM) and, in particular, flexible manufacturing systems (FMSs). The financial and operational ramifications of effective tool management has spurred considerable research in this area during the past decade and many researchers are proposing sound solutions to various facets of this broad-ranging and difficult problem. This paper identifies critical areas of research for the development of tool management systems in CIM. To develop a framework for this, the paper examines and categorizes work in academia and in industry on the management of cutting-tools in CIM and describes some key implementations, particularly in the metal-cutting industry. The solution of manufacturing problems generally demands an eclectic approach, and for this reason, we have tried to taxonomize, describe, and critique the various research thrusts in an attempt to provide a synthesis of use in more unified approaches.     

Complementary Analysis of the Field Perturbation Theory of Superconductivity

We reexamine the Nambu–Gorkov perturbation theory of superconductivity. We suggest that any field perturbation theory of superconductivity should be based on the Bogoliubov–Valatin (BV) quasi-particles. We show that two such different fields (and two additional analogous fields) may be constructed on the basis of this suggestion. The Nambu field is only one of them. For the field that is different than Nambu’s, the coherence field, the interaction is given by means of two interaction vertices that are based on the Pauli matrices τ₁ and τ₃. Consequently, the Hartree integral for the off-diagonal pairing self-energy may be finite, and in some cases large. We interpret the results in terms of conventional superconductivity and also discuss briefly the possible implications to HTSC.     

The Associative Memory Deficit of Older Adults: Further Support Using Face-Name Associations.

Previous studies have established an associative deficit hypothesis (Naveh-Benjamin, 2000), which attributes part of older adults' deficient episodic memory performance to their difficulty in creating cohesive episodes. In this article, the authors further evaluate this hypothesis, using ecologically relevant materials. Young and old participants studied name-face pairs and were then tested on their recognition memory for the names, faces, and the name-face pairs. The results extend the conditions under which older adults exhibit an associative deficit. They also show that reduced attentional resources are not the sole mediator of this deficit. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fracture analysis of materials with periodic microstructure by the representative cell method

The periodic structure of some natural and especially man-made materials can be manifested not only on an atomic but also on a larger scale. Investigation of mechanical properties of these materials usually hinges on well-developed homogenization methods. On the other hand, these methods are not suitable for fracture analysis where the knowledge of the local stress-strain fields near a flaw (a crack) is required. The result is obtained by the use of the representative cell method based on the discrete Fourier transform. This method enables one to determine the exact stress distribution in a periodic structure subjected to arbitrary loading. Direct application of the method is impossible since the crack violates the translational symmetry defined by the material microstructure. This obstacle is overcome by application of the fictitious loading to the uncracked body at the line where the crack is to be located. The amplitude of the loading is adjusted in order to fulfill the boundary conditions imposed on the crack faces. The compatibility equation for deriving this amplitude is obtained by the use of the corresponding Green function, which is found in a closed form. Fracture problems for the two types of materials with a periodic microstructure are considered. The first one is a composite material consisting of dissimilar isotropic elastic layers arranged periodically. The second periodic microstructure is a 2D infinite beam lattice modeling a cellular material. The analysis of the failure process in the latter case shows that in contrast to the case of homogeneous material, the crack propagation path is not defined by the condition of zero Mode II stress intensity factor.     

Cultural techniques in psychotherapy: A case in point.

Describes an incident in which a Bedouin 8th grader in Israel killed a classmate. The author describes how he applied S. Sue and N. Zane's (see record 1987-16319-001) interpretations of cross-cultural therapy research, which emphasize credibility and giving, to this situation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Utilization of Precast Concrete Elements in Building

Precast concrete components can be used in building construction within a comprehensive “closed” system, or as separate elements in conjunction with any building method. The feasibility of this second possibility was examined within the framework of a conventional building system and the following alternatives of elements utilization: prestressed modular floor slabs, exterior walls, and a combination of slabs and exterior walls. Each of these alternatives was compared to the conventional system without precast elements. The following criteria were used as a basis for the comparison: the labor requirement, the direct building cost (labor and materials), the construction time, and other considerations of more subjective nature. The findings of the study indicated that the utilization of precast elements might considerably reduce the labor requirement on site, and the project construction time. The direct building costs were almost unaffected by the alternative solutions.     

Laminar compressible flow between close rotating disks: An asymptotic and numerical study

Laminar steady compressible flow between close rotating thermally conducting axisymmetric disks with inflow was investigated by means of a numerical solution of the Navier-Stokes equation and an asymptotic analysis. The approximate solution, obtained for small ?, E and H (Rossby and Ekman numbers, and height/radius, respectively) is valid for “merged”, “close” and “separate” boundary layers on the disks, corresponding to β? 1, $\text{β ? 1}$ and β? 1, respectively (where $\text{β =}\text{H}\text{2}\text{√}\text{E}\text{ρ}$, and ρ is the non-dimensional density). These three cases may appear simultaneously in different regions of the same system due to the large variation of ρ in the radial direction. The small ? (i.e. negligible convection terms) does not necessarily imply small perturbations of the pressure, and a special treatment of the pressure term was used in order to account for this feature, which sometimes culminates in inversion of the radial pressure gradient. Thenumerical solution was obtained by a finite-difference, modified Cheng-Allen method, using a non-uniform mesh. The numerical and the approximate solution are in good agreement.