液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)     

轻武器射击精度影响因素剖析

从弹药和武器的角度，分析影响轻武器射击精度的诸主要因素。并针对诸主要因素提出相应的改进建议，为提高武器系统精度的研究提供参考。     

车载激光雷达探测低层大气中NO_2

在北京城区和城郊利用第二代车载测污激光雷达(AML-2)进行了外场测量实验,利用差分吸收技术从垂直、水平方向分别给出了低层大气中污染物NO2的典型测量数据。结果表明:城区的NO2浓度明显高于城郊地区的水平,并且也证实了利用该系统可以有效地监测低层大气的污染情况,为空气中有害气体的光学遥测提供了有效的测量手段。     

IPTV相关技术和标准 第2讲 IPTV业务相关标准（一）

在IPTV业务成为众入关注并被电信运营商看作为业务转型的关键业务之一的同时,有关标准化组织也开始研究和制定IPTV业务的相关标准.如在第1讲中所介绍的,IPTV业务涉及到多种技术,而这些技术都已经发展到了一定阶段,形成了相关的技术标准.下面将介绍与IPTV业务相关的标准化组织、主要标准以及相关标准的最新进展.     

油罐冒罐事故的原因分析及预防

通过事故实例分析，阐述油罐冒罐事故的原因，并针对原因提出要加强操作人员的责任心教育，完善各项规章制度，不断提高操作人员素质，严格遵守岗位操作规程，及时消除设备缺陷、完善罐区硬件设施和罐区实行现代科学管理等项措施。     

Creep and rupture properties of a squeeze-cast Mg-Al-Ca alloy

A squeeze-cast Mg-Al-Ca alloy (MRI153) was creep tested at 150, 175, and 200 °C under applied stresses in the range of 30 to 120 MPa. The creep curves were characterized by an extended tertiary stage in which the creep rate increases progressively with the creep strain. Microstructural examinations revealed the precipitation and coarsening of new particles during creep. The stress dependence of the minimum creep rate suggests a transition from power-law creep at low stresses to power-law breakdown at high stresses. Creep rupture of this alloy occurred as a result of cavitation damage at dendritic grain boundaries, with the creep rupture time and the minimum creep rate following the empirical Monkman-Grant equation. A comparison is made between the creep and rupture properties of MRI153 and those of a squeeze-cast Mg-Al alloy (AZ91).     

产品设计方案的多目标决策分析及其智能支持系统

用模糊多目标决策方法对产品设计方案进行决策分析并设计出相应的智能计算机支持系统，实例证明这一方法在实际应用中是有效的和可靠的。     

多相物质粉末衍射的物相检索

讨论了多相物质粉末衍射的物相检索问题，介绍了XRDS的物相检索软件。这是一种智能型的物相检索程序，考虑了测试数据的不确定度，以及粉末样品和块状样品衍射图谱各自的特点，不仅注意到实际样品中微量物相存在的可能，也注意到块状样品结构有序性的可能。XRDS能够帮助材料工作者同时检出样品中所含的多种物相及其含量，操作简单、结果可靠。