Metal transfer to plants grown on a dredged sediment: use of radioactive isotope 203Hg and titanium

Improperly disposed of dredged sediments contaminated with metals may induce long-term leaching and an increase of metal concentrations in ground waters and vegetal cover plants. The objective of the study was to quantify the sediment-to-plant transfer of Cu, Pb, Hg and Zn with a particular focus on the pathway of Hg and to determine whether the establishment of vegetal cover modifies the metal availability. A pot experiment with rape (Brassica napus), cabbage (Brassica oleraccea) and red fescue (Festuca rubra) was set up using a sediment first spiked with the radioisotope 203Hg. Zinc concentrations (197-543 mg kg(-1) DM) in leaves were higher than Cu concentration (197-543 mg kg(-1) DM), Pb concentration (2.3-2.6 mg kg(-1) DM) and Hg concentration (0.9-1.7 mg kg(-1) DM). Leaves-to-sediment ratios decreased as follows: Zn > Cu > Hg > Pb. According to Ti measurements, metal contamination by dry deposition was less than 1%. Mercury concentration in plant leaves was higher than European and French thresholds. Foliar absorption of volatile Hg was a major pathway for Hg contamination with a root absorption of Hg higher in rape than in cabbage and red fescue. Growth of each species increased Cu solubility. Zinc solubility was increased only in the presence of rape. The highest increase of Cu solubility was observed for red fescue whereas this species largely decreased Zn solubility. Dissolved organic carbon (DOC) measurements suggested that Cu solubilisation could result from organic matter or release of natural plant exudates. Dissolved inorganic carbon (DIC) measures suggested that the high Zn solubility in the presence of rape could originate from a generation of acidity in rape rhizosphere and a subsequent dissolution of calcium carbonates. Consequently, emission of volatile Hg from contaminated dredged sediments and also the potential increase of metal solubility by a vegetal cover of grass when used in phytostabilisation must be taken into account by decision makers.     

Analysis of computational problems expressing the overall uncertainties: photons, neutrons and electrons

In the frame of the EU Coordination Action CONRAD (coordinated network for radiation dosimetry), WP4 was dedicated to work on computational dosimetry with an action entitled 'Uncertainty assessment in computational dosimetry: an intercomparison of approaches'. Participants attempted one or more of eight problems. This paper presents the results from problems 4-8-dealing with the overall uncertainty budget estimate; a short overview of each problem is presented together with a discussion of the most significant results and conclusions. The scope of the problems discussed here are: the study of a (137)Cs calibration irradiator; the manganese bath technique; the iron sphere experiment using neutron time-of-flight technique; the energy response of a RADFET detector and finally the sensitivity and uncertainty analysis for the recoil-proton telescope discussed in the companion paper.     

Core/shell nanoparticles for multiple biological detection with enhanced sensitivity and kinetics

The paper shows the different methods to attach a molecule to detect streptavidin to a dielectric particle made of a rare-earth oxide core and a polysiloxane shell containing fluorescein. First, the detection of streptavidin binding on a biotinylated gold substrate can be achieved in three ways: the shift of the surface plasmon resonance of the substrate and the double luminescence (organic and inorganic) of the core/shell particle. Second, these detections are efficient even after elimination upon thermal annealing of all the undesired molecules that skew the assays. Finally, the particle that ballasts the protein enhances its binding kinetics and increases the localized surface plasmon resonance shift that detects the binding.     

Probing the structure of heterogeneous diluted materials by diffraction tomography

The advent of nanosciences calls for the development of local structural probes, in particular to characterize ill-ordered or heterogeneous materials. Furthermore, because materials properties are often related to their heterogeneity and the hierarchical arrangement of their structure, different structural probes covering a wide range of scales are required. X-ray diffraction is one of the prime structural methods but suffers from a relatively poor detection limit, whereas transmission electron analysis involves destructive sample preparation. Here we show the potential of coupling pencil-beam tomography with X-ray diffraction to examine unidentified phases in nanomaterials and polycrystalline materials. The demonstration is carried out on a high-pressure pellet containing several carbon phases and on a heterogeneous powder containing chalcedony and iron pigments. The present method enables a non-invasive structural refinement with a weight sensitivity of one part per thousand. It enables the extraction of the scattering patterns of amorphous and crystalline compounds with similar atomic densities and compositions. Furthermore, such a diffraction-tomography experiment can be carried out simultaneously with X-ray fluorescence, Compton and absorption tomographies, enabling a multimodal analysis of prime importance in materials science, chemistry, geology, environmental science, medical science, palaeontology and cultural heritage.     

Resonant gratings in planar Grandjean cholesteric composite liquid crystals

We propose to induce a two-dimensional (2D) periodic modulation structure into a planar Grandjean cholesteric liquid crystal (CLC) to demonstrate the intrinsic 2D photonic crystal properties of such materials. The structure combines a thin transmission grating and a Bragg reflective grating. One advantage of using CLC is the intrinsic high quality Bragg structure, which can be modulated by an electric field: shifting the wavelength band edge by changing the applied field. Another interesting property is the polarization dependence. The main difference between using CLC Bragg instead of a linear grating is the need to operate with a circularly polarized light, because the CLC modes are circular in such a regime. We present preliminary results obtained with what we believe to be the first switchable photonic CLC (PCLC) sample, made up of a polymer CLC gel.     

G-quadruplex recognition by quinacridines: a SAR, NMR, and biological study

The synthesis of a novel group of quinacridine-based ligands (MMQs) is described along with an evaluation of their G-quadruplex binding properties. A set of biophysical assays was applied to characterize their interaction with DNA quadruplexes: FRET-melting experiments and equilibrium microdialysis were used to evaluate their quadruplex affinity and their ability to discriminate quadruplexes across a broad panel of DNA structures. All data collected support the proposed model of interaction of these compounds with G-quadruplexes, which is furthermore confirmed by a solution structure determined by 2D NMR experiments. Finally, the activity of the MMQ series against tumor cell growth is reported, and the data support the potential of quadruplex-interactive compounds for use in anticancer approaches.     

Behavior of Five Large Spread Footings in Sand

Five square spread footings ranging in size from 1 to 3 m were load tested up to 150 mm of settlement. They were all embedded 0.75 m into a medium dense, fairly uniform, silty silica sand. Load-settlement curves are presented, as well as creep curves relating settlement and time under a constant load. Since the soil mass was instrumented with telltales and inclinometers, vertical and horizontal movements in the soil mass were obtained as a function of depth and lateral extent. Conclusions are reached regarding how best to measure footing settlement, how to present load test results, new correlations for use in design, creep settlement, effect of cyclic loading and preloading on creep rate, zone of influence under the footing, mode of deformation of the soil mass, and volume change observations. Twelve settlement methods, six bearing capacity methods, and the WAK (wave activated stiffness) test are evaluated by comparing the predictions with the measurements. Many results of these large-scale instrumented tests confirm findings at small scale of previous researchers.     

Automatic image analysis and morphology of fibre reinforced concrete

Automatic image analysis is an efficient tool to quantify the morphology of materials. Moreover, it can aid to understand their mechanical behaviour. Several applications of automatic methods are presented to investigate concrete reinforced by ribbon shaped amorphous cast iron fibres. Introducing ribbons into the plain matrix entrapped air voids. This affected the workability and, later on, the compressive strength of the fibre reinforced concrete (FRC). Both were improved by additions of superplasticizer in order to keep the water to cement ratio constant. The influence of the superplasticizer and fibre contents on the compactness of the FRC was characterized by the dimensional and the spatial distributions of the air voids. The orientations of fibres and microcracks were quantified by Fourier image transforms. Due to the casting procedure of the FRC, the fibres were located in “horizontal layers”, perpendicular to the casting axis. Whatever the direction of compression with respect to the layers of fibres, the microcrack network was getting more and more oriented in the direction of compression as stresses increased. The analysis of fibre and microcrack orientations suggests that, under uniaxial compression, the inelastic strain domain should be characterized by an anisotropic biaxial damage model, whose principal axes are the orthogonal and parallel directions to the layers of fibres.