Effect of prepolymerization on propylene polymerization

Polymerization of propylene was performed using MgCl₂. EtOH.TiCl₄.ID.TEA.ED catalyst system in hexane, where internal donor (ID) was an organic diester and external donor (ED) was a silane compound and also triethyl aluminum (TEA) as activator. A new method called isothermal/nonisothermal method (INM), a combination of isothermal and nonisothermal methods, was applied to produce the spherical polymer particles. The effects of the INM method and prepolymerization temperature on the final polymer morphology, M_w, and catalyst activity were also investigated. The morphology of the polymers was evaluated through scanning electron microscopy (SEM) images. GPC results were used for molecular weight (M_w) evaluation. It was found that the polymers had a better morphology when they were prepared using INM method. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Conductivity and anticorrosion performance of polyaniline/zinc composites: Investigation of zinc particle size and distribution effect

Polyaniline/zinc composites and nanocomposites were prepared using solution mixing method. Zinc (Zn) particles with an average particle size of 60 μm and zinc nanoparticles with an average particle size of 35 nm were used as fillers in polyaniline (PANI) matrix. Films and coatings of PANI/Zn composites and nanocomposites were prepared by the solution casting method. Electrical conductivity and anticorrosion properties of PANI/Zn composite and nanocomposite films and coatings with different zinc loadings were evaluated. According to the results, electrical conductivity and anticorrosion performances of both PANI/Zn composites and nanocomposites were increased by increasing the zinc loading. Also results showed that the PANI/Zn nanocomposite films and coatings have better electrical conductivity and corrosion protection effect on iron coupons compared to that of PANI/Zn composite.     

Recent Developments for Prediction of Power of Aromatic and Non‐Aromatic Energetic Materials along with a Novel Computer Code for Prediction of Their Power

The explosive power or strength of an energetic material shows its capacity for doing useful work. This work reviews recent developments for prediction of power of energetic compounds. A new user‐friendly computer code is also introduced to predict the relative power of a desired energetic compound as compared to 2,4,6‐trinitrotoluene (TNT). It is based on the best available methods, which can be used for different types of energetic compounds including nitroaromatics, nitroaliphatics, nitramines, and nitrate esters. The computed relative powers are consistent with the measured data for some new materials containing complex molecular structures.     

Suppression of phonon‐mediated hot carrier relaxation in type‐II InAs/AlAsxSb1 − x quantum wells: a practical route to hot carrier solar cells

InAs/AlAs_xSb_{1 − x} quantum wells are investigated for their potential as hot carrier solar cells. Continuous wave power and temperature‐dependent photoluminescence indicate a transition in the dominant hot carrier relaxation process from conventional phonon‐mediated carrier relaxation below 90 K to a regime where inhibited radiative recombination dominates the hot carrier relaxation at elevated temperatures. At temperatures below 90 K, photoluminescence measurements are consistent with type‐I quantum wells that exhibit hole localization associated with alloy/interface fluctuations. At elevated temperatures, hole delocalization reveals the true type‐II band alignment, where it is observed that inhibited radiative recombination due to the spatial separation of the charge carriers dominates hot carrier relaxation. This decoupling of phonon‐mediated relaxation results in robust hot carriers at higher temperatures, even at lower excitation powers. These results indicate type‐II quantum wells offer potential as practical hot carrier systems. Copyright © 2016 John Wiley & Sons, Ltd.     

Steady-state and dynamic desorption of organic vapor from activated carbon with electrothermal swing adsorption

A new method to achieve steady-state and dynamic-tracking desorption of organic compounds from activated carbon was developed and tested with a bench-scale system. Activated carbon fiber cloth (ACFC) was used to adsorb methyl ethyl ketone (MEK) from air streams. Direct electrothermal heating was then used to desorb the vapor to generate select vapor concentrations at 500 ppmv and 5000 ppmv in air. Dynamic-tracking desorption was also achieved with carefully controlled yet variable vapor concentrations between 250 ppmv and 5000 ppmv, while also allowing the flow rate of the carrier gas to change by 100%. These results were also compared to conditions when recovering MEK as a liquid, and using microwaves as the source of energy to regenerate the adsorbent to provide MEK as a vapor or a liquid.     

Formulation Optimization of a Palm-Based Nanoemulsion System Containing Levodopa

Response surface methodology (RSM) was utilized to investigate the influence of the main emulsion composition; mixture of palm and medium-chain triglyceride (MCT) oil (6%–12% w/w), lecithin (1%–3% w/w), and Cremophor EL (0.5%–1.5% w/w) as well as the preparation method; addition rate (2–20 mL/min), on the physicochemical properties of palm-based nanoemulsions. The response variables were the three main emulsion properties; particle size, zeta potential and polydispersity index. Optimization of the four independent variables was carried out to obtain an optimum level palm-based nanoemulsion with desirable characteristics. The response surface analysis showed that the variation in the three responses could be depicted as a quadratic function of the main composition of the emulsion and the preparation method. The experimental data could be fitted sufficiently well into a second-order polynomial model. The optimized formulation was stable for six months at 4 °C.     

Fuzzy logic based static VAR compensators for enhancing the performance of synchronous and asynchronous motor loads

The paper presents a simple yet powerful fuzzy logic based static VAR compensator (FLSVC) applied to an industrial power network consisting of three phase synchronous and asynchronous motor loads. In the proposed fuzzy logic controller (FLC), the speed and acceleration variations of a specific machine are taken as the inputs. To demonstrate the effectiveness and capabilities of the employed FLSVC, several non-linear time-domain digital simulation tests are performed. The results show that over a wide range of operating conditions and disturbances, the FLSVC improves remarkably the voltage profile and the overall dynamic performance.     

A new and applicable method to calculate mass and heat transfer coefficients and efficiency of industrial distillation columns containing structured packings

Most of the methods developed for efficiency estimation of distillation columns were based on the empirical mass transfer and hydraulic relations correlated to laboratory data. Therefore, these methods cannot estimate efficiency of industrial columns with sufficient accuracy. In this paper, a new and applicable method was developed for calculation of efficiency (and mass and heat transfer coefficients) of distillation columns containing structured packings. This method has potential advantages; e.g., it can calculate efficiency without using any empirical mass transfer and hydraulic correlations and models, and without the need to estimate the operational and hydraulic parameters of column. Therefore, it will be free of errors, limitations, and complexities of such empirical items. In addition, precision of the method does not decrease with increasing complexity of operating conditions and design parameters of column. The method can be used for efficiency calculation of any structured packing, including new ones, in distillation columns.     

A practical eco-environmental distribution network planning model including fuel cells and non-renewable distributed energy resources

This paper presents a long-term dynamic multi-objective planning model for distribution network expansion along with distributed energy options. The proposed model optimizes two objectives, namely costs and emissions and determines the optimal schemes of sizing, placement and specially the dynamics (i.e., timing) of investments on distributed generation units and network reinforcements over the planning period. An efficient two-stage heuristic method is proposed to solve the formulated planning problem. The effectiveness of the proposed model is demonstrated by applying it to a distribution network and comparing the simulation results with other methods and models.