Effect of beam voltage on the properties of aluminium nitride prepared by ion beam assisted deposition

The effects of nitrogen-beam voltage on the structure, stress, energy band gap and hardness of AIN thin films deposited on Si (111), Si (100) and sapphire (0001) by ion beam assisted deposition (IBAD) are reported. As the nitrogen-beam voltage was increased from 50 to 200 V, the stress and disorder in the AIN films increased as determined by X-ray diffraction, FTIR and Raman spectroscopy. The preferred orientation of the film's c-axis changed from completely normal to the film at 100 V, to a mixture of normal and in the plane of the film at 200 V. For AIN films deposited under the same conditions, the films were more highly oriented on sapphire (0001) than in Si (111). The hardness of the films increased from 18.2 to 23.7 GPa with the nitrogen-beam voltage, and possible reasons for this change in hardness are considered.     

The state of multivariate thinking for scientists in industry: 1980–2000

Chemometrics has enjoyed tremendous success in the areas related to calibration of spectrometers and spectroscopy-based measurements. These chemometric-based spectrometers have been widely applied for process monitoring and quality assurance. However, chemometrics has the potential to revolutionize the very intellectual roots of problem solving. Are there barriers to a more rapid proliferation of chemometric-based thinking, particularly in industry? What are the potential effects of chemometrics technology and the New Network Economy (NNE) working in concert? Who will be the winners in the race for faster, better, cheaper systems and products? These questions are reviewed in terms of the principles of the NNE and in the promise of chemometrics for industry. What then is the state of multivariate thinking in industry? Several powerful principles are derived from an evaluation of the NNE and chemometrics which could allow chemometrics to proliferate much more rapidly as a key general problem-solving tool.     

Analysis of thin walled structures using the boundary element method

In this article the direct boundary element formulations of stretching and bending plate problems are combined together to solve thin walled structures and other similar frames. The final system is obtained by assuming each individual plane structural element as a subregion. After the necessary transforms of these equations they can be combined together taking into account the displacement compatibility and equilibrium conditions.     

Impact and penetration by L/D ≤ 1 projectiles

Calculations of steel target penetration by L/D ≤ 1 tungsten and tungsten alloy projectiles have been extended to L/D = 1/32 over the velocity range 1.5 to 5 km/s. The ratio of crater to projectile diameter tends to 1 as L/D decreases over this entire velocity range. For impact velocities of 1.5 and 3 km/s, penetration depth normalized by projectile length, P/L, increases with decreasing projectile L/D up to a maximum value and then decreases for still lower L/D. Experiments at impact velocities of 2 and 3 km/s confirm these results. For 5 km/s impact velocity, the calculations show P/L increasing with decreasing projectile L/D over the entire range 1/32 ≤ L/D ≤ 1. The projectile L/D for which the maximum P/L occurs appears to depend on the impact velocity. P/L generally scales with impact velocity as P/L v^f(L/D) where f(L/D) ranges from 0 for a long rod to, we believe, 2 in the limit as projectile L/D approaches zero. The calculations show for 1/8 ≤ L/D ≤ 1/2, P/L v^0.9; for L/D = 1/16, P/L v^1.5; and for L/D = 1/32, the new results give P/L v^1.9.     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

Visible (660 nm) resonant cavity light-emitting diodes

The demonstration of the first visible resonant cavity light-emitting diodes (RCLEDs) is reported. The devices consist of an InAlGaP strained quantum well active region surrounded by AlAs/AlGaAs distributed Bragg reflectors. Linewidths from 0.9 mm (2.6 meV) to 45 nm (12.8 meV) were obtained by varying the cavity factor (Q).<>     

The master curve and the constitutive equation for creep deformation and fracture for Cr-Mo-V steel throughout smooth,notched and precracked specimens

It has been shown experimentally that the master curve for creep deformation versus the ratio of time to fracture time, can be obtained for smooth, notched and precracked specimens of Cr-Mo-V steel, a high-temperature ductile material. A simple unified constitutive equation, i.e. a master curve equation, has been proposed. It is suggested that there is some correlation between the creep deformation fracture curve and the creep damage size master curve. Although the range of the applicability of methodology might be rather limited, the development of this concept is needed for improved long-term creep lives and for other creep ductile materials.     

Detecting delaminations in a composite beam using anti-optimization

The present study proposes a detection technique for delaminations in a laminated beam. The proposed technique optimizes the spatial distribution of harmonic excitation so as to magnify the difference in response between the delaminated and intact beam. The technique is evaluated by numerical simulation of two-layered aluminum beams. Effects of measurement and geometric noise are included in the analysis. A finite element model for a delaminated composite, based on a layer-wise laminated plate theory is used in conjunction with a step function to simulate delaminations     

Power engineering industry interaction at Clemson University

The authors present a successful model of industry/university cooperation in establishing a strong power system curriculum in both the graduate and undergraduate level. Numerous long-term and short-term research projects have been developed to satisfy the university mission and to tackle challenging problems facing the power industry. A unique structure for the Clemson University Electric Power Research Association (CUEPRA) has been established to promote electric power system research and to meet the need for a working communication link between the power industry and the academic community. The power industries involvements in the power program at Clemson University and the strategic improvements that have been accomplished in research and education are outlined