Online comprehensive RPLC × RPLC with mass spectrometry detection for the analysis of proteome samples

LC-MS-based shotgun proteomics relies both on the power of the separation techniques and the sensitivity of detection methods. As a viable alternative to classical approaches in this field, we developed a fully automated, comprehensive 2D LC system, in which RPLC × RPLC was coupled to MS detection, for the first time, and applied for the analysis of tryptic digests obtained from α-casein and dephosphorylated α-casein. The use of a significantly different pH in the two dimensions allowed us to attain high peak capacity, despite the employment of novel identical stationary phases. Furthermore, such a combination addresses compatibility issues, thus allowing straightforward interfacing in online 2D LC configuration, as well as direct linkage to a mass spectrometer. A theoretical peak capacity of ca. 8500 was calculated for the setup, employing four serially coupled C18 columns in the first dimension (600 × 2.1 mm, 2.7 μm d.p.), operated under basic conditions, and 3 cm length of the same stationary phase (30 × 4.6 mm, 2.7 μm d.p. column), under acidic conditions, for fast second dimension analysis.     

Local Measurements of Temperature Changes Associated with the Stress-Induced Tetragonal to Monoclinic Transformation in Zirconia

An experimental arrangement capable of monitoring temperature changes from 0.01 to 0.1 K has been successfully tested for registering the temperature evolution occurring during the tetragonal to monoclinic transformation of an alumina/ceria-stabilized tetragonal zirconia polycrystal (Al₂O₃/Ce-TZP). The arrangement is based on a very small thermistor. The data obtained have been used for evaluating the thermal diffusivity of the Al₂O₃/Ce-TZP composites.     

Current noise in MgB2 superconducting thin films

In this paper we present some experimental results concerning the current noise produced during the resistive transition in MgB₂ thin films. Preliminary investigations evidenced the presence of electrical noise whose power spectrum has a region of the 1/fⁿ type with n 3. We suggest that the noise may originate from abrupt rearrangement of the current distribution inside the specimen during the percolative process of a diphasic system. Experimental measurements of the spectral components of the current noise taken during the resistive transition will be given and discussed.     

Immunity tests of implantable cardiac pacemaker against CW and pulsed ELF fields: experimental and numerical results

The aim of the present work is to investigate pacemaker (PMK) immunity against high-level extremely low frequency (typically 50 Hz) magnetic fields that can be found in industrial environment where high power machines operate. To that purpose, a test bench has been set up using a Helmholtz coil for producing extremely low frequency magnetic fields and a trunk simulator rightly fed by cardiac signals. A widely used PMK was tested, and results have been reported, under different operating conditions, for both continuous waves and variously pulsed excitations. A numerical tool has also been developed to analyze the realized test bench, based on a proper discretization of a human trunk simulation and on the construction of an equivalent three-dimensional (3-D) network. Numerical results have showed a good agreement with the experimental results.     

Characterization of superconducting thin films by Mo75Re25 target for rf cavity applications

superconducting thin films by Mo₇₅Re₂₅ single-target magnetron sputtering at various temperatures on sapphire substrates were prepared. Sharp superconductive transitions andT _c values above 10 K were achieved, and the deposited films showed a good metallic behavior. According to structural analyses (EDS and X-rays), all the samples have the same stoichiometry as the target and, even at low deposition temperatures, they exhibit theA15 phase. From measured residual resistivities and superconducting critical temperatures the theoretical BCS surface resistances were estimated and compared to those o Mo₆₀Re₄₀ films, presented in a previous work. Both these alloys, in fact, being characterized by low surface resistances and high critical fields, are good candidates as coating films in r.f. cavities.     

High-throughput screening of protein surface activity via flow injection analysis-pH gradient-dynamic surface tension detection

Using flow injection analysis (FIA), a pH gradient is blended in real time with a protein sample as the pH-dependent protein surface activity is measured by a dynamic surface tension detector (FIA-pH-DSTD). This instrumental system was developed as a high-throughput method for the screening of protein surface activity at the air/liquid interface as a function of pH. This method utilizes the continuous flow, drop-based dynamic surface tension detector in combination with flow injection sample introduction and blending of a steady-state concentration of protein sample with a pH gradient ranging from pH 2.0 to pH 11.5. Dynamic surface tension is measured through the differential pressure across the air/liquid interface of repeatedly growing and detaching drops. Continuous surface tension measurement is achieved for each eluting drop of 2-s length (2 muL), providing insight into both the kinetic and thermodynamic behaviors of molecular orientation processes at the liquid/air interface. Three-dimensional data are obtained, with surface tension first converted to surface pressure, which is collected as a function of elution time versus drop time. In FIA-pH-DSTD, a commercial pH probe is used to measure pH during elution time, enabling surface pressure throughout drop time to be subsequently plotted as a function of eluting pH. An automated DSTD calibration procedure and data analysis method is applied, which allows simultaneous use of two different solvents, permitting real-time dynamic surface tension data to be obtained. The method was applied to the analysis of 14 commercial purified proteins, yielding characteristic features of surface activity as a function of pH. The reproducibility of the measurement and selectivity advantage of the DSTD was shown for the analysis of serum albumins from various mammalian sources. Several applications were also suggested and discussed in order to show the potential of the method for protein and food chemistry studies and in the study of protein-polymer interactions.     

PCBs and selected organochlorine compounds in Italian mountain air: the influence of altitude and forest ecosystem type

Passive air samplers (polyurethane foam disks) were deployed on an altitudinal transect in the rural Italian Alps to investigate the potential influence of forest cover on air concentrations. Samplers were exposed overtwo periods, each of several weeks, either in clearings or in forests. In the first period, there was high leaf coverage (high leaf area index, LAI); in the second, the LAI was low after the autumnal leaf fall. PCBs sequestered in the PUF generally declined with altitude, for example, in the clearings PCBs-28, 52, 90/101, 118, and 138, all showed statistically significant declines (p < 0.05). The mass of HCB sequestered increased with altitude, evidence of cold condensation. Ratios of the forest:clearing concentrations were calculated; this ratio expresses the filtering ability of forests to deplete air concentrations compared to the adjacent clearings. During the high LAI sampling period, these depletion factors ranged between 0.93 and 0.54 and were inversely correlated with temperature-corrected log K0A. This relationship was notobserved during the low LAI sampling period. The depletion factors were normalized using the LAI to give a density independent depletion factor (DIDF). The slopes of the correlations with K0A were comparable for broadleaf or coniferous forests at different altitudes, suggesting that leaf surfaces determine the exchanges with air. Broadleaf forests at 1000 and 1400 m showed similar behavior, while a conifer forest at 1800 m gave depletion factors which were higher by about a factor of 2. It is suggested that DIDF can be used in regional environmental fate models to estimate the contribution of forests to contaminant fate.     

Echocardiographic follow-up in patients with mild to moderate mitral stenosis: is a yearly examination justified?

The result of this study showed that echocardiographic and Doppler parameters in patients with mild to moderate mitral stenosis did not undergo any major changes over a relatively long observation period, reflecting the substantial stability of the valve disease process. Thus, unless such patients experience clinical deterioration, a yearly echocardiographic examination appears to be unjustified.     

FT-NIR spectroscopy for the quality characterization of apricots (Prunus armeniaca L.)

Abstract: The nondestructive assessment of apricot fruit quality (Bora cultivar) was carried out by means of FT-NIR reflectance spectroscopy in the wavenumber range 12000 to 4000 cm⁻¹. Samples were harvested at four different ripening stages and scanned by a fiber optical probe immediately after harvesting and after a storage of 3 d (2 d at 4 °C and 1 d at 18 °C); the flesh firmness (FF), the soluble solids content (SSC), the acidity (A), and the titratable acidity (malic and citric acids) were then measured by destructive methods. Soft independent modeling of class analogy (SIMCA) analysis was used to classify spectra according to the ripening stage and the storage: partial least squares regression (PLS) models to predict FF, SSC, A, and the titratable acidity were also set-up for both just harvested and stored apricots. Spectral pretreatments and wavenumber selections were conducted on the basis of explorative principal component analysis (PCA). Apricot spectra were correctly classified in the right class with a mean classification rate of 87% (range: 80% to 100%). Test set validations of PLS models showed R² values up to 0.620, 0.863, 0.842, and 0.369 for FF, SSC, A, and the titratable acidity, respectively. The best models were obtained for the SSC and A and are suitable for rough screening; a lower power prediction emerged for the other maturity indices and the relative predictive models are not recommended. Practical Application : The results of the study could be used as a tool for the assessment of the ripening stage during the harvest and the quality during the postharvest storage of apricot fruits.     

Dye‐Doped Polyhedral Oligomeric Silsesquioxane (POSS)‐Modified Polymeric Matrices for Highly Efficient and Photostable Solid‐State Lasers

Here, the design, synthesis, and characterization of laser nanomaterials based on dye‐doped methyl methacrylate (MMA) crosslinked with octa(propyl‐methacrylate) polyhedral oligomeric silsesquioxane (8MMAPOSS) is reported in relation to their composition and structure. The influence of the silicon content on the laser action of the dye pyrromethene 567 (PM567) is analyzed in a systematic way by increasing the weight proportion of POSS from 1 to 50%. The influence of the inorganic network structure is studied by replacing the 8MMAPOSS comonomer by both the monofunctionalized heptaisobutyl‐methacryl‐POSS (1MMAPOSS), which defines the nanostructured linear network with the POSS cages appearing as pendant groups of the polymeric chains, and also by a new 8‐hydrogenated POSS incorporated as additive to the polymeric matrices. The new materials exhibit enhanced thermal, optical, and mechanical properties with respect to the pure organic polymers. The organization of the molecular units in these nanomaterials is studied through a structural analysis by solid‐state NMR. The domain size of the dispersed phase assures a homogeneous distribution of POSS into the polymer, thus, a continuous phase corresponding to the organic matrix incorporates these nanometer‐sized POSS crosslinkers at a molecular level, in agreement with the transparency of the samples. The silicon–oxygen core framework has to be covalently bonded into the polymer backbone instead of being a simple additive and both the silica content and crosslinked degree exhibit a critical influence on the laser action.