Spatio‐temporal geometry fusion for multiple hybrid cameras using moving least squares surfaces

Multi‐view reconstruction aims at computing the geometry of a scene observed by a set of cameras. Accurate 3D reconstruction of dynamic scenes is a key component for a large variety of applications, ranging from special effects to telepresence and medical imaging. In this paper we propose a method based on Moving Least Squares surfaces which robustly and efficiently reconstructs dynamic scenes captured by a calibrated set of hybrid color+depth cameras. Our reconstruction provides spatio‐temporal consistency and seamlessly fuses color and geometric information. We illustrate our approach on a variety of real sequences and demonstrate that it favorably compares to state‐of‐the‐art methods.     

The role of clay network on macromolecular chain mobility and relaxation in isotactic polypropylene/organoclay nanocomposites

It is well known that a so-called “three-dimensional filler network structure” will be constructed in the polymer/layered silicate nanocomposites when the content of layered clay reaches a threshold value, at which the silicate sheets are incapable of freely rotating, due to physical jamming and connecting of the nanodispersed layered silicate. In this article, the effect of such clay network on the mobility and relaxation of macromolecular chains in isotactic polypropylene(iPP)/organoclay nanocomposites was investigated in detail with a combination of DMTA, DSC, TGA, TEM, rheometry and melt flow index measurements. The main aim is to establish a relationship between the mesoscopic filler network structure and the macroscopic properties of the polymer nanocomposites, particularly to explore the role of the clay network on the mobility and relaxation of macromolecular chains. It was found that the nanodispersed clay tactoids and layers play less important or dominant roles on the mobility of iPP chains depending on the formation of percolating filler network. The turning point of macroscopic properties appeared at 1 wt% organoclay content. Before this point, the effect of organoclay can be negligible, and the increase of chain mobility was ascribed to the decrease of molecular weight of polymer chains, as commonly occurs during dynamic melt processing; after this point, however, a reduced mobility of chains and a retarded chain relaxation were observed and attributed to the formation of a mesoscopic filler network. The essential features of such a mesoscopic organoclay network were estimated and discussed on the basis of stress relaxation and structural reversion measurements. A schematic model was proposed to describe the different relaxation and motion behaviors of macromolecular chains in the unfilled polymer and the filled hybrids with partial and percolated organoclay networks, respectively.     

Rheology of poly(n‐butyl methacrylate) and its composites with calcium carbonate

Poly(n‐butyl methacrylate) (PBMA) composites with calcium carbonate (CaCO₃) were prepared by in situ radical copolymerization of butyl methacrylate (BMA) and methacrylic acid (MA) with precipitated calcium carbonate. To compare the different rheological behaviors of the monomer mixtures with CaCO₃ and the composites, the steady and dynamic viscosities of BMA/MA/CaCO₃ and poly(BMA/MA/CaCO₃) were measured by means of steady and oscillatory shear flows. The viscosity of the mixture BMA/MA/CaCO₃ was found to increase evidently with the increasing of CaCO₃%. The influence of MA% on viscosity of BMA/MA/CaCO₃ was slight. During the in situ polymerization, the viscosity of the reacting system was measured to be enhanced by a factor of about 10⁴ from the monomer/CaCO₃ mixture to composites. The dependency of zero‐shear viscosity on molar mass of PBMA was also investigated. The relation between the zero‐shear viscosity and molar mass is η₀ = 10^?15 M_w^3.5. The evolution of the viscosity with the temperature for both PBMA and its composites was obtained and time–temperature superposition was used to build master curves for the dynamic moduli. The flow activation energies were found to be 115.0, 148.6, and 178.7 kJ/mol for PBMA, composite PBMA/CaCO₃ (90/10), and PBMA/MA/CaCO₃ (89/1/10), respectively. The viscosity of the composites containing less than 10% CaCO₃ was lower than that of pure PBMA with the same molar mass. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1376–1383, 2003     

Glutarimide acrylic copolymer: A new route to high heat PVC

PVC is the second largest polymer produced and used in the U.S. It is a self-extinguishing material with excellent chemical resistance and good dimensional stability. It's greatest asset, however, is it's versatility. By specifically formulating PVC with the numerous types of additives available, a balance of properties can be tailored for a wide range of applications. The most serious disadvantage of PVC is it's low heat resistance which limits the service temperature of finished articles to about 70°C. Now an additive is available that can be formulated with PVC to form miscible, transparent blends with increased service temperature. With proper formulating, the higher HDT can be achieved without sacrificing other properties. It is especially important in clear PVC applications where no increase in haze was noted with the addition of the acrylic imide copolymer. Indications are that substantial market opportunities exist for a high heat PVC. Major market segments include clear packaging with it's need for hot-fill containers, building products where the desire to use darker colors provides the driving force, and in custom injection molding applications where improved heat resistance would allow vinyl to compete more effectively with FR-styrenics.     

Fischer-tropsch synthesis on a precipitated iron catalyst: Influence of silica support on product selectivities

The influence of silica support on the α-olefins, internal olefins and branched hydrocarbon selectivities of the gasoline range products of a precipitated iron catalyst in the Fischer-Tropsch synthesis was investigated. Three catalysts with varying silica content and constant promoter content were studied. It was found that there is a linear relationship between the silica content of the catalysts and the internal olefin and branched hydrocarbon product selectivities. The selectivities of the aromatic and alcohol products remain relatively constant, indicating that the production of these two groups of compounds is not affected by the presence of silica support in the catalysts.     

Electrophoretic Deposition of YSZ Particles on Non-Conducting Porous NiO–YSZ Substrates for Solid Oxide Fuel Cell Applications

This paper reports a method of performing electrophoretic deposition (EPD) on non-conducting substrates overcoming the requirement of a conducting substrate through the use of porous substrates. The conductivity of the substrate is therefore no longer a limiting factor in the application of EPD. This method is applicable to the fabrication of thick or thin layers of ceramic or metal for various applications. As an example, thin and dense yttria-stabilized zirconia (YSZ) layers have been deposited on a non-conducting NiO–YSZ substrate by EPD from a non-aqueous suspension. A solid oxide fuel cell constructed on these sintered bilayers exhibited power densities of 384 and 611 mW/cm² at 750° and 850°C, respectively.     

Cuticular lipids of insects: V. Cuticular wax esters of secondary alcohols from the grasshoppersMelanoplus packardii andMelanoplus sanguinipes

Wax esters of secondary alcohols constitute 18–20% of the cuticular lipid extract ofMelanoplus packardii and 26–31% of the cuticular lipids ofMelanoplus sanguinipes. The total number of carbons in the wax esters range from 37–54 with 41 predominating in both species. The fatty acids ofM. packardii wax esters are 16∶0, 18∶0, 14∶0, 20∶0 and 12∶0 in decreasing quantity. The fatty acids ofM. sanguinipes wax esters are 18∶0, 20∶0, 16∶0 22∶0, 14∶0, 19∶0 and 17∶0 in decreasing quantity. The secondary alcohols from the wax esters ofM. packardii are C₂₅, C₂₃ and C₂₇ in decreasing quantity, and the secondary alcohols of theM. sanguinipes are C₂₃, C₂₅, C₂₁, C₂₇, C₂₄, C₂₂ and C₂₆ in decreasing quantity. Each secondary alcohol consists of two to four isomers with the hydroxyl group located near the center of the chain. Montana Agriculture Experiment Station, Journal Series No. 332.     

Synthesis of Organotin Polyamine Ethers Containing Acyclovir and their Preliminary Anticancer and Antiviral Activity

Organotin polyamine ethers containing acyclovir in their backbone were synthesized in moderate to high yield employing the aqueous interfacial polycondensation system. The products are high molecular weight polymers. Infrared spectroscopy of the products shows new bands characteristic of the formation of Sn–N and Sn–O bonds consistent with the proposed structure. MALDI-TOF MS below 2000 Da shows the presence of organotin and acyclovir units containing these two moieties. The products show moderate inhibition of a number of cancer cell lines and exhibit the ability to inhibit a number of viruses, particularly the herpes simplex virus-1 and varicella zoster virus that are responsible for herpes, chicken pox and shingles.     

The influence of styrene–butadiene diblock copolymer on styrene–butadiene–styrene triblock copolymer viscoelastic properties and product performance

The effects of the styrene–butadiene (SB) diblock copolymer on the viscoelastic properties of styrene–butadiene–styrene (SBS) triblock copolymers were examined in both in the the neat state and within specific product applications. The addition of the SB diblock copolymer into a pure SBS triblock copolymer resulted in a significant decrease in the plateau storage modulus and a quantitative linear rise in tan delta. In a pure triblock, in which all endblocks are anchored in polystyrene domains, all entanglements are physically trapped. The SB diblock embodies untrapped polybutadiene endblocks that are able to relax stress by chain reptation through the rubbery polybutadiene matrix. The SB diblock copolymer quantitatively lowered the microphase separation temperature (MST) of the SBS triblock copolymer. These changes in linear viscoelastic behavior manifest themselves into a reduction in the efficiency and performance of the SBS triblock copolymer in asphalt pavement binders and hot-melt adhesive blends. Specifically, the SB diblock diminished the complex shear modulus and elasticity of a polymer-modified asphalt, which translated into lower predicted rutting specification values. The increase in diblock content altered the viscoelastic response of the hot-melt adhesive blend, translating into a reduction in the shear holding power and shear adhesion failure temperature. The lack of network participation, coupled with the relaxation of the polybutadiene endblocks, accounts for the lower strength and greater temperature susceptibility of the diblock-containing systems. © 1995 John Wiley & Sons, Inc.     

Structural and kinetic studies on ligand binding in wild-type and active-site mutants of penicillin acylase

Penicillin acylase catalyses the condensation of Calpha-substituted phenylacetic acids with beta-lactam nucleophiles, producing semi-synthetic beta-lactam antibiotics. For efficient synthesis a low affinity for phenylacetic acid and a high affinity for Calpha-substituted phenylacetic acid derivatives is desirable. We made three active site mutants, alphaF146Y, betaF24A and alphaF146Y/betaF24A, which all had a 2- to 10-fold higher affinity for Calpha-substituted compounds than wild-type enzyme. In addition, betaF24A had a 20-fold reduced affinity for phenylacetic acid. The molecular basis of the improved properties was investigated by X-ray crystallography. These studies showed that the higher affinity of alphaF146Y for (R)-alpha-methylphenylacetic acid can be explained by van der Waals interactions between alphaY146:OH and the Calpha-substituent. The betaF24A mutation causes an opening of the phenylacetic acid binding site. Only (R)-alpha-methylphenylacetic acid, but not phenylacetic acid, induces a conformation with the ligand tightly bound, explaining the weak binding of phenylacetic acid. A comparison of the betaF24A structure with other open conformations of penicillin acylase showed that betaF24 has a fixed position, whereas alphaF146 acts as a flexible lid on the binding site and reorients its position to achieve optimal substrate binding.