14 kV single-phase superconducting fault current limiter based on YBCO films

We present the fabrication and short circuit test results of a 14 kV single-phase resistive superconducting fault current limiter (SFCL) based on YBa₂Cu₃O₇ (YBCO) films. Individual components were processed using the 4″ YBCO films and have the rated voltage and current of 600 V and 35 A at 77 K, respectively. Twenty four components, eight components in series and three lines in parallel, make a module having the rated voltage and current of 4.8 kV and 105 A, respectively. Three modules were assembled in series to produce the SFCL working at 77 K, a 14 kV single-phase machine for the 22.9 kV Y-Y grid. short circuit tests were successfully conducted in an accredited test facility with the maximum fault currents up to 14.1 kA_P. All components quenched together upon faults and shared the rated voltage evenly without any supplementary device between the modules. This proves that the SFCL based on YBCO films may not only work reliably at 22.9 kV, but also provide technical feasibility for higher voltage application including the transmission grids.     

Improved strained HEMT characteristics using double-heterojunctionIn0.65Ga0.35As/In0.52Al0.48As design

The DC and microwave properties of strained In_0.65Ga _0.35As/In₀₅₂Al_0.48As HEMTs (high electron-mobility transistors) with double-heterojunction design are presented. The high sheet carrier density and good carrier confinement give rise to excellent device performance with very low output conductance. For 1×150-μm² long-gate HEMTs, the measured cutoff frequency f_T and maximum frequency of oscillation f_max are as high as 37 and 66 GHz, respectively     

Asymptotic reduced-dimensional steering strategies for CMG singularity-free control

The geometric singularity problem is one of principal difficulty when using single-gimbal control moment gyros as spacecraft attitude control devices. To overcome singularity, new steering logics are suggested in this paper which results in a reduction in the difficulty of generating gimbal rates around a singular state. One of the suggested steering laws presented is the reduced dimensional singular value decomposition steering law, which adopts the singular value decomposition in reduced dimensional forms. Two other steering laws make use of the least square method in reduced dimensional forms. All of the suggested steering laws have been generated for the compensation of the torque insufficiency. These logics are verified mathematically and simulations at a singular condition and non-singular condition are performed to see how well they work.     

Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

Service Reliability Assessment of Weld Repaired CrMoV Steel Rotors

This research deals with the service evaluation of a retired CrMoV steel rotor that has been repaired using deep groove multi‐pass submerged arc welding (SAW) and gas tungsten arc welding (GTAW). Accelerated creep tests were conducted at several elevated temperatures and extrapolated to the service temperatures. The coalescence of carbides and cavity growth during creep were evaluated. For the CrMoV‐GTAW samples, it was found that the creep life depended on the location of the crossweld in the welded specimen. The service lives of the weldments were extrapolated.     

Semilinear Duhem model for rate-independent and rate-dependent hysteresis

The classical Duhem model provides a finite-dimensional differential model of hysteresis. In this paper, we consider rate-independent and rate-dependent semilinear Duhem models with provable properties. The vector field is given by the product of a function of the input rate and linear dynamics. If the input rate function is positively homogeneous, then the resulting input-output map of the model is rate independent, yielding persistent nontrivial input-output closed curve (that is, hysteresis) at arbitrarily low input frequency. If the input rate function is not positively homogeneous, the input-output map is rate dependent and can be approximated by a rate-independent model for low frequency inputs. Sufficient conditions for convergence to a limiting input-output map are developed for rate-independent and rate-dependent models. Finally, the reversal behavior and orientation of the rate-independent model are discussed.     

A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²     

A design and analysis of objective function-based unsupervised neural networks for fuzzy clustering

Fuzzy clustering has played an important role in solving many problems. In this paper, we design an unsupervised neural network model based on a fuzzy objective function, called OFUNN. The learning rule for the OFUNN model is a result of the formal derivation by the gradient descent method of a fuzzy objective function. The performance of the cluster analysis algorithm is often evaluated by counting the number of crisp clustering errors. However, the number of clustering errors alone is not a reliable and consistent measure for the performance of clustering, especially in the case of input data with fuzzy boundaries. We introduce two measures to evaluate the performance of the fuzzy clustering algorithm. The clustering results on three data sets, Iris data and two artificial data sets, are analyzed using the proposed measures. They show that OFUNN is very competitive in terms of speed and accuracy compared to the fuzzy c-means algorithm.     

Multiple cerebellar infarction due to vertebral artery obstruction and bulbar symptoms associated with vertical subluxation and atlanto-occipital subluxation in ankylosing spondylitis

Ankylosing spondylitis (AS) results in disease-specific inflammation at the site of ligamentous insertion into the bone. Atlantoaxial joint subluxation and vertical subluxation of the axis may occur as a consequence of instability resulting from the inflammatory process. Spontaneous anterior atlantoaxial subluxation is a well recognized complication in about 2% of patients with AS, and presents with or without signs of spinal cord compression. Vertical subluxation may follow anterior or posterior subluxation. It was noted in 3-8% of patients with rheumatoid arthritis, but is an exceedingly rare complication of AS. Moreover, it has never been reported that multiple cerebellar infarction and bulbar symptoms developed spontaneously due to atlanto-occipital subluxation and vertical subluxation in a patient with a long [corrected] history of AS. We describe a man with AS who developed multiple cerebellar infarction due to vertebral artery obstruction and bulbar symptoms associated with atlanto-occipital subluxation and vertical subluxation.     

Hybrid verrucous squamous cell carcinoma of sinonasal tract: a case report

Verrucous carcinoma is a variant of squamous cell carcinoma and should be distinguished from benign papilloma and well-differentiated nonverrucous squamous cell carcinoma. It is rare tumor of the sinonasal tract. Occasionally, conventional squamous cell carcinomatous components may be seen in verrucous carcinoma. This entity is called a hybrid verrucous squamous cell carcinoma. We report a case of hybrid verrucous squamous cell carcinoma occurring in the nasal cavity and paranasal sinus of a 67-year-old male. The removed mass shows the typical feature of verrucous carcinoma, but focally conventional squamous cell carcinomatous area is also noted. The treatment of this case follows verrucous carcinoma, but close follow up is mandatory because it may potentially spread to regional lymph nodes in contrast to pure form of verrucous carcinoma.