Large Dynamic Range Digital Nanodot Gradients of Biomolecules Made by Low‐Cost Nanocontact Printing for Cell Haptotaxis

A novel method is introduced for ultrahigh throughput and ultralow cost patterning of biomolecules with nanometer resolution and novel 2D digital nanodot gradients (DNGs) with mathematically defined slopes are created. The technique is based on lift‐off nanocontact printing while using high‐resolution photopolymer stamps that are rapidly produced at a low cost through double replication from Si originals. Printed patterns with 100 nm features are shown. DNGs with varying spacing between the dots and a record dynamic range of 4400 are produced; 64 unique DNGs, each with hundreds of thousands of dots, are inked and printed in 5.5 min. The adhesive response and haptotaxis of C2C12 myoblast cells on DNGs demonstrated their biofunctionality. The great flexibility in pattern design, the massive parallel ability, the ultra low cost, and the extreme ease of polymer lift‐off nanocontact printing will facilitate its use for various biological and medical applications.     

Mesostructured Hollow Siliceous Spheres for Adsorption of Dyes

A facile and one-pot strategy for the preparation of novel diamino-functionalized hollow siliceous spheres (DAF-HSS) is suggested. Field-emission scanning electron microscopy (FE-SEM) images of DAF-HSS showed a monodispersed hollow sphere morphology. Also, TEM images revealed that the DAF-HSS has a porous structure with parallel semi-long-range channels. DAF-HSS material was used as an adsorbent for the removal of hazardous monocationic dyes in aqueous solution. Neutral red (NR) and crystal violet (CV) were selected as model compounds. Isotherm and kinetic studies were carried out and their different linear forms were applied and compared. The equilibrium data fitted better with the Langmuir model.     

Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads

Reinforced concretes (RC) have been widely used in constructions. In construction, one of the critical elements carrying a high percentage of the weight is columns which were not used to design to absorb large dynamic load like surface bursts. This study focuses on investigating blast load parameters to design of RC columns to withstand blast detonation. The numerical model is based on finite element analysis using LS-DYNA. Numerical results are validated against blast field tests available in the literature. Couples of simulations are performed with changing blast parameters to study effects of various scaled distances on the nonlinear behavior of RC columns. According to simulation results, the scaled distance has a substantial influence on the blast response of RC columns. With lower scaled distance, higher peak pressure and larger pressure impulse are applied on the RC column. Eventually, keeping the scaled distance unchanged, increasing the charge weight or shorter standoff distance cause more damage to the RC column. Intensive studies are carried out to investigate the effects of scaled distance and charge weight on the damage degree and residual axial load carrying capacity of RC columns with various column width, longitudinal reinforcement ratio and concrete strength. Results of this research will be used to assessment the effect of an explosion on the dynamic behavior of RC columns.     

Application of sustainable foaming agents to control the mobility of carbon dioxide in enhanced oil recovery

Carbon dioxide (CO₂) flooding is a conventional process in which the CO₂ is injected into the oil reservoir to increase the quantity of extracting oil. This process also controls the amount of released CO₂ as a greenhouse gas in the atmosphere which is known as CO₂ sequestration process. However, the mobility of the CO₂ inside the hydrocarbon reservoir is higher than the crude oil and always viscous fingering and gravity override problems occur during a CO₂ injection. The most common method to overcome these problems is to trap the gas bubbles in the liquid phase in the form of aqueous foam prior to CO₂ injection. Although, the aqueous foams are not thermodynamically stable, special care should be considered to ensure bulk foam preparation and stability. Selection of a proper foaming agent from a large number of available surfactants is the main step in the bulk foam preparation. To meet this purpose, many chemical and crude oil based surfactants have been reported but most of them are not sustainable and have disposal problems. The objective of this experimental study is to employ Lignosulfonate and Alkyl Polyglucosides (APGs) as two sustainable foaming agents for the bulk foam stability investigations and foam flooding performance in porous media. In the initial part, the bulk foam stability results showed that APGs provided more stable foams in comparison with Lignosulfonate in all surfactant concentrations. In the second part, the results indicated that the bulk foam stability measurements provide a good indication of foam mobility in porous media. The foaming agent’s concentration which provided the maximum foam stability also gave the highest value of mobility reduction in porous media.     

Crosslinked methyl methacrylate/ethylene glycol dimethacrylate polymer compounds with a macroazoinitiator

A silane‐containing diamine, bis(p‐aminophenoxy) diphenylsilane (BADPS), was prepared by the condensation of p‐aminophenol with dichlorodiphenyl silane in the presence of triethylamine. Then, BADPS was condensed with 4,4‐azobis(4‐cyanopentanoyl chloride) to prepare macroazoinitiators containing silane units (Si–MAIs). A series of poly(methyl methacrylate) gels containing silane were derived by the solution free‐radical crosslinking copolymerization of methyl methacrylate and ethylene glycol dimethacrylate monomers initiated by these macroazoinitiators at a total monomer concentration of 6 mol/L and 80°C. Si–MAIs were characterized with ¹H‐NMR and ¹³C‐NMR spectroscopy, and the structural characteristics of the gels were also examined. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Soft Core/Shell Packages for Stretchable Electronics

This paper presents materials and core/shell architectures that provide optimized mechanical properties in packages for stretchable electronic systems. Detailed experimental and theoretical studies quantitatively connect the geometries and elastic properties of the constituent materials to the overall mechanical responses of the integrated systems, with a focus on interfacial stresses, effective modulus, and maximum extent of elongation. Specific results include core/shell designs that lead to peak values of the shear and normal stresses on the skin that remain less than 10 kPa even for applied strains of up to 20%, thereby inducing minimal somatosensory perception of the device on the human skin. Additional, strain‐limiting mesh structures embedded in the shell improve mechanical robustness by protecting the active components from strains that would otherwise exceed the fracture point. Demonstrations in precommercial stretchable electronic systems illustrate the utility of these concepts.     

Brain mechanisms for reading and language processing in spina bifida meningomyelocele: A combined magnetic source- and structural magnetic resonance imaging study.

Objective: The development of the ability to process spoken and written language depends upon a network of left hemisphere temporal, parietal, and frontal regions. The present study explored features of brain organization in children with spina bifida meningomyelocele (SBM) and shunted hydrocephalus, who commonly present with precocious development of word reading skills and preservation of vocabulary and grammar skills. Method: Eight children with SBM were compared with 15 IQ and reading-level matched, typically developing controls on MRI-based morphometric and Magnetic Source Imaging-derived neurophysiological profiles. Results: Children with SBM showed reduced magnetic activity in left inferior parietal regions during spoken word recognition and pseudoword reading tasks. We also noted reduced surface area/volume in inferior parietal and posterior temporal regions in SBM and increased gray matter volumes in left middle frontal regions and gyral complexity in left posterior temporal and inferior parietal regions. Conclusions: A complex pattern of changes in cortical morphology and activation may serve as evidence for structural and functional brain reorganization ensuring preservation of language and decoding abilities in children with SBM. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Distribution and Sources of Polycyclic Aromatic Hydrocarbons (PAHs) in Surface Sediments from the Northern Part of the Persian Gulf (Hormuzgan Province)

Sediments from the intertidal areas of Hormuzgan province in northern part of Persian Gulf (Iran) were investigated for the levels and possible sources of 15 polycyclic aromatic hydrocarbons (PAHs). Samples of sediments were collected from twelve sampling sites and analyzed for PAHs by gas chromatography–mass spectrometry (GC-MS). The results showed that the total concentrations of PAHs ranged from 765 to 1898 ng/g dry weight. Composition pattern in the sediment samples from 12 sampling sites was dominated by 4-ring PAH compounds. Molecular indices based on ratios of PAH concentrations were used to differentiate PAHs from pyrolitic, petrogenic and mixed origins. The results of study suggested that the main sources of PAHs in the sediment were mixed with pyrolitic and petrogenic inputs. According to the US sediments quality guidelines (SQGs) (ERL/ERM) sediments of the mentioned region did not show any ecotoxicological risk for benthic organisms.     

Preparation of granular activated carbon from oil palm shell by microwave-induced chemical activation: Optimisation using surface response methodology

In this study, waste palm shell was used to produce activated carbon (AC) using microwave radiation and zinc chloride as a chemical agent. The operating parameters of the preparation process were optimised by a combination of response surface methodology (RSM) and central composite design (CCD). The influence of the four major parameters, namely, microwave power, activation time, chemical impregnation ratio and particle size, on methylene blue (MB) adsorption capacity and AC yield were investigated. Based on the analysis of variance, microwave power and microwave radiation time were identified as the most influential factors for AC yield and MB adsorption capacity, respectively. The optimum preparation conditions are a microwave power of 1200 W, an activation time of 15 min, a ZnCl₂ impregnation ratio of 1.65 (g Zn/g precursor) and a particle size of 2 mm. The prepared AC under the optimised condition had a BET surface area (S_BET) of 1253.5 m²/g with a total pore volume (V_tot) of 0.83 cm³/g, which 56% of it was contributed to the micropore volume (V_mic).