Surface characteristics of fluorine-modified PAN-based carbon fibers

Different fluorination methods were applied to modify the surface properties of carbon fibers. The relationship between the degree of fluorination and the physicochemical properties of carbon fibers was studied using a combination of mechanical tests, elemental analysis (EA), X-ray photoelectron spectrometry (XPS), and X-ray diffraction (XRD). EA and XPS analyses of fluorinated carbon fibers showed that treatment with mixtures of F₂/O₂ introduced a much higher fluorine concentration than that with F₂ only. However, XRD analysis showed that there was no increase in the interlayer distance, due to the mild fluorination condition applied. Consequently, the oxyfluorination was one of the more effective methods to increase surface polarity of carbon fibers, which probably played an important role in improving the tensile properties of the fibers in the epoxy resin system.     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

The zebrafish Pax3 and Pax7 homologues are highly conserved, encode multiple isoforms and show dynamic segment-like expression in the developing brain

This study describes the isolation and characterization of zebrafish homologues of the mammalian Pax3 and Pax7 genes. The proteins encoded by both zebrafish genes are highly conserved (>83%) relative to the known mammalian sequences. Also the neural expression patterns during embryogenesis are very similar to the murine homologues. However, observed differences in neural crest and mesodermal expression relative to mammals could reflect some functional divergence in the development of these tissues. For the zebrafish Pax7 protein we report the first full-length amino acid sequences in vertebrates and show the existence of three additional isoforms which have truncations in the homeodomain and/or the C-terminal region. These novel variants provide evidence for additional isoform diversity of vertebrate Pax proteins.     

Thermodynamic assessment of the Al deoxidation reaction in liquid iron

The deoxidation reaction of aluminum in liquid iron has been investigated thermodynamically using Al₂O₃ crucible at 1873 K under Ar atmosphere as a fundamental study for the accurate control of inclusions in the ladle refining process. In addition to the equilibrium constant log K_A1 for the aluminum deoxidation reaction, the first-order and second-order interaction parameters between aluminum and oxygen were experimentally determined in the concentration range of aluminum up to 1 %. The temperature dependence of the equilibrium constant and the first-order interaction parameter e^A1 was also obtained: log K_A1 = 12.32 - 47400/T, e^A1 = 15.57 - 36500/T. The equilibrium relation between aluminum and oxygen contents in the aluminum deoxidized iron by applying interaction parameters and the equilibrium constant determined in this work satisfies fairly well the equilibrium data over the whole concentration range of aluminum considered.     

Sleep in relation to age, sex, and chronotype in Japanese workers

The Morningness-Eveningness Questionnaire and Life Habits Inventory were administered to 622 Japanese workers matched for sex and age. We investigated the distributions of the scores on the Morningness-Eveningness Questionnaire and sleep-wake habits by age and sex. Subjects were classified into five age groups and three chronotypes. The distributions and mean scores on the questionnaire advanced slightly toward the Morning type from the young to the aged group. The habitual bedtimes and waking times were significantly earlier in all the chronotypes from the young to the aged group, and the preferred bedtimes and waking times were also clearly earlier from the young to the aged group. The length of sleep was shorter for the Evening than the Morning types, especially in the group below 24 yr. The differences in habitual and preferred sleep length were greater than 1 hour for all age groups, especially the two groups under 34 yr. The number of awakenings during night sleep increased from the young to the aged group for all chronotypes. The older Evening type tended more toward frequent napping and longer naptime. The variabilities of bedtime and sleep length were larger for the young and Evening type than for the old group and Morning types. Further, the mood upon waking and satisfaction with sleep length were better in the aged Evening type than the young Morning type. The women under 44 yr. woke up earlier than the men of the same age, and the women of the 35-54 yr. groups had a shorter length of sleep than others. These may be related to childcare and housework. These results indicated that the phase of circadian rhythms had moved forward from the young to the aged group, and the individual's rhythm, of those that were aged Morning types, showed better agreement with sleep-wake rhythms than did others.     

Early local recurrence of rectal cancer showing extremely rapid growth after curative surgery: report of a case

We report herein the case of a 59-year-old woman who developed a local recurrence of rectal cancer which showed extremely rapid growth. The patient had undergone a curative low anterior resection with total mesoexcision, and was discharged on postoperative day 25 after an uneventful recovery. However, 2 months after the operation, she developed bleeding from the rectum during defecation, the quantity of which gradually increased. A colonoscopy performed during the fifth postoperative month revealed a circular tumor at the suture line. The tumor was unresectable because it had firmly invaded not only the sacrum, but also the right ureter. Despite the administration of 5-fluorouracil and leucovorin, the patient died of cancer 18 months after her initial surgery. Considering that local recurrence of rectal cancer does not usually occur within 1 year after surgery, this case is unusual because the local recurrence developed very early and showed extremely rapid growth, occupying the entire lumen of the rectum by the time it was detected by colonoscopy during the fifth postoperative month.     

Sesquiterpenoids of the drimane class from a sponge of the genus Dysidea

Ten sesquiterpenoids, including seven new ones, have been isolated from an undescribed sponge of the genus Dysidea. Compounds 1-8 are sesquiterpenoids of the drimane class, while 9 and 10 are 12-norsesquiterpenoids of the same structural class. The structures of novel compounds have been determined by combined spectroscopic methods. These compounds exhibited moderate antimicrobial and enzyme inhibitory (Na+/K(+)-ATPase and PLA2) activities.     

Selective oxidation of Fe-30Ni alloy in a low-temperature range (433–473 K)

Fe-30Ni alloy specimens were oxidized for 10–240 min at 433–473 K in pure oxygen at a pressure of 1.33×10⁴ Pa. The thickness of oxide films was measured by a multiple-angle-of-incidence ellipsometer. The kinetics of film growth were found to obey a parabolic rate law. The depth-profiling of oxidized surfaces, performed with simultaneous use of Auger electron spectroscopy (AES) and argon-ion sputter-etching technique, reveals that iron component is selectively oxidized and an iron-depeletion zone is formed in the underlying alloy. The thickness of the iron depletion zone increases with increasing oxidation time or oxidation temperature. During surface oxidation of the alloy, the transport rate of iron component in the film is almost equal to the interdiffusion rate in the underlying alloy, indicating the establishment of a steady state. The values of the interdiffusion coefficient, , of the underlying alloy estimated from the depth-composition profiles are more than 10 orders of magnitude as large as the values extrapolated from the lattice diffusion data of the corresponding alloy obtained at high temperature. The enormously large values of may be explained in terms of the vacancy (monovacancy or divacancy)-enhanced lattice diffusion mechanism.     

Effect of lamellar spacing on microstructural instability and creep behavior of a lamellar TiAl alloy

Finer lamellar spacing in the lamellar structure of a Ti–45Al–2Nb–2Mn + 0.8 vol.%TiB₂ (45XD) alloy does improve the primary creep resistance. However, the unstable nature of the fine plate contributes largely to the degradation of the lamellar structure and a rapid increase in the tertiary creep rate, indicating that a fine lamellar structure has a detrimental effect on the long-term creep.     

Curing behavior and structure of an epoxy/clay nanocomposite system

The curing behavior of an epoxy/clay nanocomposite system composed of a bifunctional epoxy resin with an aromatic amine curing agent and an organically modified clay was investigated. Differential scanning calorimetry (DSC) was used to investigate the curing behavior of the epoxy/clay nanocomposite system. The curing rate of the nanocomposite system increased with increasing clay content. A kinetic equation, considering an autocatalytic reaction mechanism, could describe fairly well the curing behavior of the epoxy/clay nanocomposite system. The reaction kinetic parameters of the kinetic equation were determined by fitting DSC conversion data to the kinetic equation, using a nonlinear numerical method. Dynamic mechanical analysis was used to investigate the thermomechanical properties of the epoxy/clay nanocomposite system. The glass transition temperature of the epoxy/clay nanocomposite system increased slightly with increasing clay content. The structure of the nanocomposite system was characterized by X‐ray diffraction analysis and transmission electron microscope imaging. The formation of intercalated structures was observed dominantly in the epoxy/clay nanocomposites, together with some exfoliated structures. POLYM. ENG. SCI., 46:1318–1325, 2006. © 2006 Society of Plastics Engineers