Efficient dissemination of personalized information using content-based multicast

There has been a surge of interest in the delivery of personalized information to users (e.g., personalized stocks or travel information), particularly as mobile users with limited terminal device capabilities increasingly desire updated and targeted information in real time. When the number of information recipients is large and there is sufficient commonality in their interests, as is often the case, IP multicast is an efficient way of delivering the information. However, IP multicast services do not consider the structure and semantics of the information in the multicast process. We propose the use of Content-Based Multicast (CBM) where extra content filtering is performed at the interior nodes of the IP multicast tree; this will reduce network bandwidth usage and delivery delay, as well as the computation required at the sources and sinks. We evaluate the situations in which CBM is advantageous. The benefits of CBM depend critically upon how well filters are placed at interior nodes of the IP multicast tree and the costs depend upon those introduced by filters themselves. Further, we consider the benefits of allowing the filters to be mobile so as to respond to user mobility or changes in user interests and the corresponding costs of filter mobility. The criterion that we consider is the total network bandwidth utilization. For this criterion, we develop an optimal filter placement algorithm, as well as a heuristic that executes faster than the optimal algorithm. We evaluate the algorithms by means of simulation experiments. Our results indicate that filters can be effective in substantially reducing bandwidth. We also find filter mobility is worthwhile if there is marked large-scale user mobility. We conclude with suggestions for further work.     

Preparation of ion‐exchange membranes by hydrolysis of radiation‐grafted polyethylene‐g‐polyacrylamide membranes

Polyethylene‐g‐polyacrylamide membranes were prepared by graft polymerization of acrylamide onto polyethylene films using a preirradiation method. The ion‐exchange membranes were obtained by the hydrolysis of grafted films so as to transform amide groups into carboxyl groups. The fraction of amide groups transformed into carboxyl groups was limited to ～0.5. The characterization and thermal behavior of membranes with different degrees of grafting were evaluated by FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) measurements. The heat of fusion and the crystallinity of polyethylene decreased considerably in the hydrolyzed membranes depending on the degree of grafting. It was found that the grafting of acrylamide led to the reduction in crystallinity due to disruption of the crystallites (crystal defects) and dilution of the inherent crystallinity (dilution effect). The contribution of the hydrolysis step to the crystallinity decrease was negligible. The thermal stability of the membranes as obtained from TGA showed considerable enhancement after hydrolysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 149–154, 2003     

Chemical composition and nutritional quality of tehineh (sesame butter)

The chemical composition and nutritional quality of tehineh, a paste of dehulled roasted sesame seeds, from Saudi Arabia and other countries, were studied. Results showed 24.7% protein, 58.9% fat, 2.3% fiber, 3.0% ash and <1.0% moisture. The tehineh contained relatively high amounts (mg/100 g) of P (692), Mg (362), Fe (7.19), Cu (1.96), Mn (1.46) and Zn (7.82) and low amounts of Ca (61) and Se (0.05). Gas-liquid chromatography (GLC) analysis of the oil revealed percentages of 42.4 for oleic, 39.7 for linoleic, 9.8 for palmitic and 6.4 for stearic acid. Lysine was the only limiting amino acid with a chemical score of 64, while the sulphur-containing amino acids (methionine + cystine) and tryptophan were present in amounts exceeding the requirement of the FAO/WHO (1973) reference protein. The in vitro protein digestibility (IVPD) value of 83.3% and the calculated protein efficiency ratio (C-PER), 2.14, were slightly higher than those of sesame seeds and both values were lower than the IVPD and C-PER of 90.0% and 2.50, respectively, for ANRC casein.     

Design and control of an olefin metathesis reactive distillation column

This paper considers the design and control of a reactive distillation column in which one reactant is consumed and two products are formed (A?B+C). The volatilities are α_B>α_A>α_C, i.e. the reactant is intermediate boiling between the two products. The metathesis of 2-pentene is considered as the demonstrative example. The column has a single feed of the intermediate boiling reactant. The distillate contains mostly light component and the bottoms mostly heavy.Three designs are considered: the base case (low-conversion/low-pressure), a low-conversion/high-pressure case and a high-conversion/high-pressure case. The base design is obtained from the literature, and the other two steady-state designs are optimized with respect to the total annual cost. All the designs are found to be openloop stable. Five control structures are studied for the base design. Then the best two structures are applied to the remaining two designs. This category of reactive distillation exhibits less challenging problems than other categories since it uses a single feed, which eliminates the need for the control structure to perfectly balance two fresh feeds.Simulation results demonstrate that effective dynamic control is provided by a control structure that uses two temperatures to maintain the purities of both product streams. No internal composition measurement is required. This structure is found to be robust and stable and rejects loads and tracks setpoints very well.     

Surface designing of polypropylene by critical monitoring of the grafting conditions

The grafting of acrylic acid onto electron beam‐irradiated polypropylene was carried out using preirradiation method. The stability of peroxy radicals was investigated by electron spin resonance. It was found that the decay of peroxy radicals is much faster at 70°C than at 40°C and ambient temperature. The grafting has been observed to be strongly dependent on the monomer dilution in the reaction medium. The grafting was ascertained by attenuated total reflectance (ATR). The distribution of grafts across the samples was monitored by infrared microscopy. It was found that the graft management is considerably influenced by composition of the grafting medium. The grafting involving pure monomer leads to the surface enrichment with the polyacrylic acid chains. The samples grafted in pure monomer led to much lower contact angles as compared to the diluted monomer solution. The swelling of the grafted samples also showed a trend that was governed by the graft management. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 546–553, 2006     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

Using Automated Negotiation for Grid Services

The popularity of grid services has widened their application to numerous domains and increased the utilization of computational resources. In order to create more incentives for the resources owners to lease their resources and prevent users from wasting the resources, the introduction of a market-oriented grid is inevitable. However, the issues for the negotiation between service provider and consumer over the supply and demand of resources can be complex, with highly interdependent issues. In this research, a simulated automated negotiation mechanism including a co-evolutionary mechanism and a modified game theory approach is proposed, to assist them in reaching an agreement over the conflicting issues. In the proposed architecture, the co-evolution process is able to reduce the multiple dimensional search space into a two-dimension search space and identify the appropriate negotiation strategies for the negotiating agents to form a payoff matrix which can be used for the game theory related stage of their interaction. The multiple stage negotiation process is introduced to improve the negotiation result. In this paper, an application which requires a large amount of computational resources to process the data generated from mobile devises is used to demonstrate that the proposed system is able to resolve the conflicts and obtain a valid solution.     

Data decomposition using independent component analysis with prior constraints

In many data analysis problems, it is useful to consider the data as generated from a set of unknown (latent) generators or sources. The observations we make of a system are then taken to be related to these sources through some unknown function. Furthermore, the (unknown) number of underlying latent sources may be less than the number of observations. Recent developments in independent component analysis (ICA) have shown that, in the case where the unknown function linking sources to observations is linear, such data decomposition may be achieved in a mathematically elegant manner. In this paper, we extend the general ICA paradigm to include a very flexible source model, prior constraints and conditioning on sets of intermediate variables so that ICA forms one part of a hierarchical system. We show that such an approach allows for efficient discovery of hidden representation in data and for unsupervised data partitioning.     

Harmonic and intermodulation performance in an R-LED series network

Analytical expressions are obtained for predicting the harmonic and intermodulation performance of R-LED series networks. These expressions are in terms of the ordinary Bessel functions with arguments depenedent on the modulation index.     

The Bivariate Transmuted Family of Distributions: Theory and Applications

The bivariate distributions are useful in simultaneous modeling of two random variables. These distributions provide a way to model models. The bivariate families of distributions are not much widely explored and in this article a new family of bivariate distributions is proposed. The new family will extend the univariate transmuted family of distributions and will be helpful in modeling complex joint phenomenon. Statistical properties of the new family of distributions are explored which include marginal and conditional distributions, conditional moments, product and ratio moments, bivariate reliability and bivariate hazard rate functions. The maximum likelihood estimation (MLE) for parameters of the family is also carried out. The proposed bivariate family of distributions is studied for the Weibull baseline distributions giving rise to bivariate transmuted Weibull (BTW) distribution. The new bivariate transmuted Weibull distribution is explored in detail. Statistical properties of the new BTW distribution are studied which include the marginal and conditional distributions, product, ratio and conditional momenst. The hazard rate function of the BTW distribution is obtained. Parameter estimation of the BTW distribution is also done. Finally, real data application of the BTW distribution is given. It is observed that the proposed BTW distribution is a suitable fit for the data used.