A Combined Antenna Array and Multi-User Detection DS-CDMA Receiver in Single-Path and Multi-Path Fading Channels

An adaptive antenna array is incorporated into a decorrelatingmulti-user detector to effectively increase the DS-CDMA system capacity.Capacity improvement is due to beamforming gain, spatial diversity gain(assuming large angle spread), and the decorrelating effect. Thereceiver has been analyzed for the cases of sufficiently andinsufficiently spaced receiving antennas. The receiver consists of afront-end beamformer for every user in the cell and has knowledge of allusers' signature sequences. The beamformer estimates the desired userchannel vector, enhancing its signal and reducing the co-channelinterference from other directions. The multi-user detection, exploitingknowledge of other users, rejects those interferers whose arrival anglesare close to that of the desired user. The average uncoded Bit ErrorRate (BER) as a function of the number of in-beam active users, theaverage antenna Signal-to-Noise Ratio (SNR), and the number of receivingantennas is examined in both single-path and multi-path Rayleigh fadingchannels. Analysis shows an increase in system capacity proportional tothe number of receiving antennas.     

Sucralfate attenuates gastric mucosal lesions and increased vascular permeability induced by ischaemia and reperfusion in rats

Recent evidence suggests that oxygen-derived free radicals are involved in mediating gastric microvascular and parenchymal cell injuries induced by ischaemia and reperfusion. Therefore, the effect of the locally acting anti-ulcer drug, sucralfate, was studied on ischaemia and reperfusion (e.g. induced gastric lesions, intraluminal bleeding, changes in vascular permeability and non-protein sulfhydryl levels in the rat stomach). Allopurinol was used as a known standard antioxidant drug. Rats were subjected to 30 min of gastric ischaemia in the presence of 100 mmol/L hydrochloric acid and reperfusion periods of 15, 30 or 60 min duration. The gastric lesions were assessed microscopically under an inverted microscope. The vascular permeability was quantified by measuring the extravasated Evans blue in the stomach. There were significantly greater numbers of gastric lesions, intraluminal bleeding and leakage of Evans blue during all reperfusion periods as compared with those of ischaemia, with maximum effects occurring at 60 min following reperfusion. Pretreatment with sucralfate (31.25-250 mg/kg, p.o.) or allopurinol (12.5-50 mg/kg, i.p.) 30 min before the procedure, dose-dependently reduced the gastric lesions, intraluminal bleeding, and decreased the vascular permeability induced by ischaemia and reperfusion. Furthermore, sucralfate dose-dependently reverses the ischaemia and reperfusion-induced depletion of mucosal non-protein sulfhydryl levels and inhibited the superoxide radical production in both cell-free xanthine-xanthine oxidase and in the stimulated polymorphonuclear cellular systems. These results suggest that the protection produced by sucralfate against gastric injury may be due to its antioxidant effects.     

Prevalence of adrenal carcinoma among incidentally discovered adrenal masses. A retrospective study from 1989 to 1994. Gruppo Piemontese Incidentalomi Surrenalici

BACKGROUND: The incidental discovery of an adrenal mass poses the problem of distinguishing between the frequent benign masses and the infrequent malignant ones that require surgery. Univocal guidelines to approach this problem are unavailable. OBJECTIVE: To perform a survey of the clinical management of incidentally discovered adrenal masses (ie, adrenal incidentalomas). DESIGN: A multicentric retrospective analysis of hospital medical records of adrenal incidentalomas diagnosed during a 5-year period; the medical records were scrutinized for demographic data and clinical details by means of a specifically tailored questionnaire. SETTING: The major surgical and medical centers of Piedmont, a northern Italian region with approximately 4 million inhabitants. The recruitment pattern of these centers was unselected. PATIENTS: The definition of adrenal incidentaloma was limited to patients with a physical examination and a clinical history unindicative of adrenal disease. Exclusion criteria also included hypertension of suspected endocrine origin and a history of neoplasms known to metastasize frequently in the adrenal glands. Two hundred twenty-four medical records were collected, and 210 were analyzed (14 excluded a posteriori). RESULTS: Most patients were in their 50s and 60s, and women were predominantly affected. The frequency of adrenocortical cancer was 13% among patients operated on. The tumor diameter was highly correlated with the risk of cancer; a cutoff at 5 cm had a sensitivity of 93% with a specificity of 64% in discriminating between benign and malignant cortical lesions. CONCLUSIONS: The occurrence of adrenocortical carcinoma among adrenal incidentalomas is not rare. The evaluation of the mass size is a simple and effective method for selecting patients at risk for cancer. The indication for surgery of masses larger than 5 cm, or of masses of any diameter that have suspicious imaging characteristics, limits unnecessary operations and costs.     

Metal-insulator-semiconductor solar cell under gamma irradiation

The performance of a home made MIS–p-Si solar cell was experimentally studied under various gamma irradiation doses (up to 500 Mrad). The effect of radiation dose on the I−V and C−V characteristics was investigated in this work. The obtained results showed that all the output parameters of the cells under investigation were degraded with gamma radiation exposure. In addition, the effects of fabrication conditions (metal thickness and adding of antireflection coating) on the cell output parameters were also investigated.     

PHYSICS-BASED SIMULATION OF HIGH SPEED MACHINING

Computer simulation of high speed machining processes can provide a unique insight and reduce the number of design iterations required to advance and optimize the process. Predictive modeling of high speed machining of exotic materials has been hindered by the nonlinear behavior of this type of materials at extremely high strain, strain rate, and temperatures. This paper presents a physics-based modeling technology that includes the change in the material constitutive equation and the friction characterization at cutting speeds up to 400 m min^-1. The dependence of the accuracy of the predicted parameters, such as the chip formation on cutting forces, chip/tool/workpiece interface temperature, stress and strain distributions are also discussed. The fundamentals of metal cutting were utilized to understand the effect of parameter changes in regimes that are outside current empirical knowledge databases.     

Kinetic of CO2 absorption and carbamate formation in aqueous solutions of diethanolamine

The absorption rates of CO₂ into aqueous solutions of Diethanolamine (DEA) with varying concentrations from 0.2 to 4M and temperature range from 293 to 323 K were measured by using a laboratory stirred reactor. The CO₂ partial pressure was varied in a range that the reaction would occur in pseudo first order regime. Experimental data were analyzed and the kinetic parameters associated with the reaction were determined. The activation energy for the deprotonation of the intermediate zwitterion was estimated at about 11.4 kcal/mol. The contribution of carbamate formation to the overall absorbed CO₂ was experimentally evaluated and found to be of the order of 100%.     

Processing techniques for particulate-reinforced metal aluminium matrix composites

The critical need for high strength, lightweight and high stiffness materials has, in recent years, resurrected much interest in discontinuously reinforced powder metallurgy metal matrix composites. These hybrid materials have combined both standard wrought alloys of aluminium and a wide variety of discontinuous reinforcements such as particulates and whiskers of ceramic materials. Renewed interest in these materials as attractive candidates for use in the aerospace and transportation industry has resulted from an attractive and unique combination of physical and mechanical properties, and an ability to offer near isotropic properties coupled with the low cost of these materials when compared with existing monolithic materials. In this paper, the primary processing categories for discontinuously-reinforced metal-matrix composites are highlighted and the salient features of the various techniques in each category are discussed. The variables involved in each processing technique are examined, and the influence of alloy chemistry highlighted. Novel processing techniques for these materials such as the variable co-deposition method is presented as a means to process these novel engineering materials in order to improve their overall mechanical performance.