ALKYD PAINT WASTE CHARACTERIZATION AND DISTILLATION

In the present study the characterization and distillation of alkyd paint waste have been carried out in order to establish the technical viability of organic solvents recovery and to decide upon the best environmental management for the waste stream from a paint spray-booth application in an automotive component factory. The paint is a black primer based on an alkyd resin with toluene and xylene as solvents, black carbon as pigment, fillers, and other minor components.

The paint, paint wastes, and distillation wastes have been characterized by determination of the physicochemical properties of the solid (solvents content and flash point) and determination of ecotoxicity (EC₅₀), total organic carbon (TOC), and metals concentration of the leachates. The highly volatile matter (HVM) content, determined by the weight loss at 200°C, has been used as a parameter to relate with the hazardous wastes regulations based on the characterization parameters EC₅₀, TOC, and flash point.

Distillation experiments have been performed in a simple batch mode with mixtures of paint waste, water, and additives in order to obtain high efficiencies in the recovery of volatile organic compounds and to obtain a final solid with nonhazardous behavior and good manageability qualities. A fractional factorial design (2^3-1) of experiments was carried out in order to study the influence of the distillation variables: water/paint waste ratio (2/1-3/1 (g/g)), temperature (110°-145°C), alkaline additives (Na(OH),CaO, Ca(OH)₂), and amount of other additives (wt.% of bentonite, cement, and Ca(OH)₂) on the solvent recovery, [% VOCs]_Recovery, on the residual volatile organic compounds, [% VOCs]_{Distillation Waste}, and on the total organic content (TOC) of the waste leachates. The present work shows the quantitative results of the alkyd paint waste distillation process under optimum conditions.     

AN EXPERIMENTAL STUDY OF METHANE OXIDATIVE COUPLING IN FIXED BED REACTORS WITH A DISTRIBUTED OXYGEN FEED

Methane oxidative coupling has been carried out in a reactor with a distributed oxygen feed. The system consists of a catalytic bed of Li/MgO in a quartz reactor with one inlet for methane and one or more inlets for oxygen. To enable the comparison between the co-fed mode and the distributed feed mode, an especial experimental design was used in order to maintain the same contact time in the co-fed and in the distributed feed modes, and in order to minimize the temperature gradients caused by the exothermic oxidation process. The results clearly show that a distributed oxygen feed may give rise to significant increases in the hydrocarbon selectivity obtained at a given methane conversion,     

Heterogeneous asymmetric reactions. 23. Enantioselective hydrogenation of ethyl pyruvate over cinchonine- and α-isocinchonine-modified platinum catalysts

The enantioselective hydrogenation of ethyl pyruvate to (S)-ethyl lactate over cinchonine- and -isocinchonine-modified Pt/Al₂O₃ catalysts was studied as a function of modifier concentration and reaction temperature. The maximum enantioselectivities obtained under the applied mild conditions were 89% ee using cinchonine (0.014 mmoldm^–3, 1 bar H₂, 23°C, 6% AcOH in toluene), and 76% ee in the case of -isocinchonine (0.14 mmoldm^–3, 1 bar H₂, –10°C, 6% AcOH in toluene). Since -isocinchonine of rigid structure exists only in anti-open conformation these data provide additional experimental evidence to support the former suggestion concerning the dominating role of anti-open conformation in these cinchona-modified enantioselective hydrogenations.     

Chemical analysis of ozonized theobroma fat

Ozonized theobroma fat is used as raw material in the manufacture of pessaries and cosmetic creams. Ozonization of theobroma fat with water was carried out at different applied ozone dosages, and the resultant PV, acid value, iodine value, total hydroperoxide content, and FA content were determined. PV and total hydroperoxide content showed a notable increase with applied ozone dosage up to 35.7 mg/g. Acid value varied slightly from 4.1 to 9.9 mg KOH/g, and the iodine value fell to zero. PV and total hydroperoxide content increased slightly with a higher applied ozone dosage. The comparison of total hydroperoxide measurement using ferrous oxidation in xylenol orange assay and traditional iodometric assay for PV determination showed a significant linear correlation. Small amounts of oleic acid were found in ozonized theobroma fat samples with iodine value equaling zero, which demonstrated that iodine value determination is an inexact assay. During ozonization of theobroma fat, an increase in acid value of 18.9-fold with respect to the initial value was observed owing to decomposition of peroxide.     

Aboveground nitrogen in relation to estimated total plant uptake in maize and bean

The main objective of this field study was to estimate the total plant uptake of soil mineral N in maize (Zea mays L.) and common bean (Phaseolus vulgaris L.) grown in crop rotations under different N content in Nicaragua. Secondary objectives were to estimate the fraction of the measured soil mineral N content taken up in this way, and to determine how the measured N in plant aboveground parts was related to the total mineral N uptake. A large variation in N content was obtained by using data from fertilisation experiments. Plant total N uptake was estimated as the residual N in a mass balance calculation of soil mineral N. Mineral N content in the top 0–0.3 m soil layer in the field cultivations and in tubes isolated from root uptake, and N content in aboveground plant parts were measured every 30 days. Estimated plant total uptake of soil mineral N varied considerably (2.5–14 g N m⁻² 30 day⁻¹) over periods and N treatments. The range of variation was similar for maize and bean. The fraction of the soil mineral N that was taken up by the plant daily varied more in maize (about 0.03–0.12 day⁻¹) than in bean (about 0.05–0.08 day⁻¹). Our results suggest that monthly changes in N in aboveground plant parts were linearly related to plant total N uptake during the same period. Aboveground plant N constituted between about 55% and 80% of total uptake of soil mineral N in maize depending on period within season, whereas for bean it was more constant and smaller (about 40%).     

Strength Analysis of Self-Supported Films Produced by Aqueous Electrophoretic Deposition

The goal of this work is to study the feasibility of the characterization of the fracture strength of porous alumina/zirconia thin layers by three-point bending and Weibull analysis. Films have been obtained by electrophoretic deposition on graphite and thermo-gelation of the deposit with carrageenan. On sintering, graphite is burned out and self-supported films are obtained. Strength values are well fitted to a simple two-parameter Weibull distribution. The fracture origins are subcritical growth cracks that originated at the surface irregularities associated with the processing method. A Weibull modulus around 3 is obtained.     

Improving retrieval accuracy of Hierarchical Cellular Trees for generic metric spaces

Metric Access Methods (MAMs) are indexing techniques which allow working in generic metric spaces. Therefore, MAMs are specially useful for Content-Based Image Retrieval systems based on features which use non L _p norms as similarity measures. MAMs naturally allow the design of image browsers due to their inherent hierarchical structure. The Hierarchical Cellular Tree (HCT), a MAM-based indexing technique, provides the starting point of our work. In this paper, we describe some limitations detected in the original formulation of the HCT and propose some modifications to both the index building and the search algorithm. First, the covering radius, which is defined as the distance from the representative to the furthest element in a node, may not cover all the elements belonging to the node’s subtree. Therefore, we propose to redefine the covering radius as the distance from the representative to the furthest element in the node’s subtree. This new definition is essential to guarantee a correct construction of the HCT. Second, the proposed Progressive Query retrieval scheme can be redesigned to perform the nearest neighbor operation in a more efficient way. We propose a new retrieval scheme which takes advantage of the benefits of the search algorithm used in the index building. Furthermore, while the evaluation of the HCT in the original work was only subjective, we propose an objective evaluation based on two aspects which are crucial in any approximate search algorithm: the retrieval time and the retrieval accuracy. Finally, we illustrate the usefulness of the proposal by presenting some actual applications.     

Online FPS games: effect of router buffer and multiplexing techniques on subjective quality estimators

First Person Shooters are a genre of online games in which users demand a high interactivity, because the actions and the movements are very fast. They usually generate high rates of small packets which have to be delivered to the server within a deadline. When the traffic of a number of players shares the same link, these flows can be aggregated in order to save bandwidth. Certain multiplexing techniques are able to merge a number of packets, in a similar way to voice trunking, creating a bundle which is transmitted using a tunnel. In addition, the headers of the original packets can be compressed by means of standard algorithms. The characteristics of the buffers of the routers which deliver these bundled packets may have a strong influence on the network impairments (mainly delay, jitter and packet loss) which determine the quality of the game. A subjective quality estimator has been used in order to study the mutual influence of the buffer and multiplexing techniques. Taking into account that there exist buffers which size is measured in terms of bytes, and others measured in packets, both kinds of buffers have been tested, using different sizes. Traces from real game parties have been merged in order to obtain the traffic of 20 simultaneous players sharing the same Internet access. The delay and jitter produced by the buffer of the access router have been obtained using simulations. In general, the quality is expected to be reduced as the background traffic grows, but the results show an anomalous region in which the quality rises with the background traffic amount. Small buffers present better subjective quality results than bigger ones. When the total traffic amount gets above the available bandwidth, the buffers measured in bytes add to the packets a fixed delay, which grows with buffer size. They present a jitter peak when the offered traffic is roughly the link capacity. On the other hand, buffers which size is measured in packets add a smaller delay, but they increase packet loss for gaming traffic. The obtained results illustrate the need of knowing the characteristics of the buffer in order to make the correct decision about traffic multiplexing. As a conclusion, it would be interesting for game developers to identify the behaviour of the router buffer so as to adapt the traffic to it.     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.