Adsorption of carbon dioxide and methane on nanosized sodalite octahydrate zeolite

Nanosized sodalite octahydrate zeolite has been developed using a crystallization room temperature in the absence of organic templates. The best aging time found was 120?h and in this time the nanosized sodalite octahydrate zeolite is formed. The samples were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-Transform Infrared (FTIR) spectroscopy, x-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and N₂ adsorption–desorption isotherm. The equilibrium adsorption capacities of pure gases CO₂ and CH₄ were measured at 298 and 308?K up to 20?bar on both powder and granules of sodalite octahydrate zeolite. With increasing temperature, the adsorption capacity decreases for both sodalite octahydrate zeolite powder and granules. The selectivity of CO₂ at 308?K over CH₄ was 6.53.     

A Question Mark on Iron Deficiency in 185 Million People of Pakistan: Its Outcomes and Prevention

Micronutrient deficiency especially the iron deficiency is the bane of our lives, affecting all strata of society. Unfortunately, the women during pregnancy, adolescence, and children are under this curse particularly in developing countries like Pakistan. It is one of the biggest reasons of complications during pregnancy and malnourished children under five years of age. Maternal death, still-births, and underweight births are most common consequences of iron deficiency and these outbreaks as iron-deficiency anemia in Pakistan. Disastrous nature of iron deficiency requires an urgent call to eradicate it. Hence, the solution should not be frail comparing with the huge economic loss and other incompatibilities. Flour fortification, supplementation, dietary diversification, and especially maternal education are possible solutions for combating this micronutrient deficiency.     

Synergistic evaluation of AgO2 nanoparticles with ceftriaxone against CTXM and blaSHV genes positive ESBL producing clinical strains of Uro‐pathogenic E. coli

The silver oxide nanoparticles (AgO₂ ‐NPs) were synthesised using silver foil as a new precursor in wet chemical method. X‐ray diffraction analysis shows crystallographic structures of AgO₂ ‐NPs with crystallite size of 35.54 nm well‐matched with standard cubic structure. Scanning electron microscopy analysis clearly shows the random distribution of spherical‐shaped nanoparticles. Energy dispersive X‐ray analysis confirmed the purity of the samples as it shows no impurity element. Fourier transforms infra‐red analysis confirmed the formation of AgO₂ ‐NPs with the presence of Ag‐O‐Ag stretching bond. All the techniques also confirmed the loading of ceftriaxone drug on the surface of AgO₂ ‐NPs. This study also described the effect of AgO₂ ‐NPs having synergistic activity with β lactam antibiotic i.e. ceftriaxone against ESBL generating Escherichia coli (E. coli). Among isolated strains of E. coli, 60.0% were found to be ESBL producer. The synergistic activities of AgO₂ ‐NPs with ceftriaxone suggest that these combinations are effective against MDR‐ESBL E. coli strains as evident by increase in zone sizes. The present study observed rise in MDR‐ESBL E. coli with polymorphism of blaCTXM and blaSHV causing UTI infections in Pakistani population. The antibiotic and AgO₂ ‐NPs synergistic effect can be used as an efficient approach to combat uro‐pathogenic infections.Inspec keywords: antibacterial activity, nanofabrication, nanomedicine, drugs, nanoparticles, microorganisms, crystallites, scanning electron microscopy, silver compounds, X‐ray diffraction, X‐ray chemical analysis, Fourier transform infrared spectra, organic compounds, geneticsOther keywords: synergistic evaluation, clinical strains, silver oxide nanoparticles, silver foil, wet chemical method, X‐ray diffraction analysis, crystallographic structures, standard cubic structure, spherical‐shaped nanoparticles, energy dispersive X‐ray analysis, ceftriaxone drug, synergistic activity, ESBL producer, scanning electron microscopy, Fourier transform infrared analysis, Escherichia coli, blaSHV gene positive ESBL, crystallite size, random distribution, β lactam antibiotics, MDR‐ESBL E. coli strains, polymorphism, blaCTXM, uro‐pathogenic infections, uro‐pathogenic E. coli, AgO₂      

Comparative evaluation of in vitro efficacy of colesevelam hydrochloride tablets

Context: Colesevelam hydrochloride is used as an adjunct to diet and exercise to reduce elevated low-density lipoprotein (LDL) cholesterol in patients with primary hyperlipidemia as well as to improve glycemic control in patients with type 2 diabetes. This is likely to result in submission of abbreviated new drug applications (ANDA).

Objective: This study was conducted to compare the efficacy of two tablet products of colesevelam hydrochloride based on the in vitro binding of bile acid sodium salts of glycocholic acid (GC), glycochenodeoxycholic acid (GCDA) and taurodeoxycholic acid (TDCA).

Methods: Kinetic binding study was carried out with constant initial bile salt concentrations as a function of time. Equilibrium binding studies were conducted under conditions of constant incubation time and varying initial concentrations of bile acid sodium salts. The unbound concentration of bile salts was determined in the samples of these studies. Langmuir equation was utilized to calculate the binding constants k₁ and k₂.

Results: The amount of the three bile salts bound to both the products reached equilibrium at 3?h. The similarity factor (f₂) was 99.5 based on the binding profile of total bile salts to the test and reference colesevelam tablets as a function of time. The 90% confidence interval for the test to reference ratio of k₂ values were 96.06–112.07 which is within the acceptance criteria of 80–120%.

Conclusion: It is concluded from the results that the test and reference tablets of colesevelam hydrochloride showed a similar in vitro binding profile and capacity to bile salts.     

Friction Stir Welding of Low-Carbon AISI 1006 Steel: Room and High-Temperature Mechanical Properties

Friction stir welding (FSW) is an ecologically benign solid-state joining process. In this work, FSW of low-carbon AISI 1006 steel was carried out to study the microstructure and mechanical properties of the resulting joints at both room temperature (RT) and 200 °C. In the parameter space investigated here, a rotational tool speed and translation feed combination of 1200 rpm and 60 mm/min produced a defect-free weld with balanced mechanical properties and a superior Vickers microhardness profile compared to all other conditions and to base metal (BM). At faster translation feeds (100 and 150 mm/min), wormhole defects were observed in the weld microstructure and were attributed to higher strain rate experienced by the weld zone. Under tensile loading, welded material exhibited yield strength that was up to 86 and 91% of the BM at RT and 200 °C, respectively. On the other hand, tensile strength of welded material was nearly similar to that of the base metal at both RT and 200 °C. However, at both temperatures the tensile ductility of the welded joints was observed to be significantly lower than the BM. Annealing of the 1200 rpm and 60 mm/min FSW specimen resulted in tensile strength of 102% compared to base material and 47% increase in the strain at failure compared to the as-welded specimen. The Charpy impact values revealed up to 62 and 53% increase in the specific impact energy for the 1200 rpm and 60 mm/min welded joints as compared with the BM.     

A nanoporous adsorbent for removal of furfural from aqueous solutions

The adsorption of furfural by a surfactant-containing nanoporous material is investigated in the present study. We used cetyltrimethylammonium bromide (CTAB) as the cationic surfactant for synthesis of MCM-48. Batch adsorption studies demonstrate that the surfactant-containing MCM-48 has a significant capacity for adsorption of furfural from aqueous solution. The parameters investigated in this study included pH, contact time, agitation speed and initial furfural concentration. The adsorption process of furfural is tested with Langmuir and Freundlich isotherm models. Application of the Langmuir isotherm to the systems yielded maximum adsorption capacity of 196.1 mg/g.     

Bioavailability assessment of oral coenzyme Q10 formulations in dogs

The purpose of this investigation was to compare the bioavailability of three coenzyme Q10 (CoQ10) formulations in dogs using an open, randomized, multiple-dose crossover design. The formulations included a powder-filled capsule (A, control) and two soft gelatin formulations (Q-Gel as the water-miscible form of CoQ10, B and Q-Nol as the water-miscible form of ubiquinol, the reduced form of CoQ10, C). Formulations were evaluated in pairs, allowing a washout period of 14 days prior to crossing over. Blood samples were collected from each animal prior to dosing to determine the endogenous plasma CoQ10 concentrations. Serial blood samples were collected for 72 hr and plasma CoQ10 concentrations were determined by high-performance liquid chromatography. Plasma concentration-time profiles were corrected for endogenous CoQ10 concentrations. Results showed that the relative bioavailabilities of formulations B and C were approximately 3.6 and 6.2-fold higher than that of control formulation A. The AUC(microgram.hr/mL) +/- SD, Cmax(microgram/mL) +/- SD, and Tmax(hr) +/- SD for formulations A, B, and C were 1.695 +/- 0.06, 6.097 +/- 0.08, and 10.510 +/- 0.10; 0.096 +/- 0.035, 0.169 +/- 0.038, and 0.402 +/- 0.102; and 4.2 +/- 1.48, 4.1 +/- 1.57, and 4.5 +/- 0.58, respectively. While no significant differences were observed between Tmax values of the three formulations, the AUC and Cmax values for formulations B and C were significantly higher than those of the control (p < 0.05). The present investigation demonstrates that soft gelatin capsules containing water-miscible CoQ10 formulations B (Q-Gel) and C (Q-Nol) are superior to powder-filled formulations with regard to their biopharmaceutical characteristics.     

Placental Growth Factor Levels in Populations with High Versus Low Risk for Cardiovascular Disease and Stressful Physiological Environments such as Microgravity: A Pilot Study

This pilot study compared placental growth factor (PIGF) levels in populations with high versus low risk for cardiovascular disease. Previous experiments from our laboratory (Sundaresan et al. 2005, 2009) revealed that the angiogenic factor PIGF was up regulated in modeled microgravity conditions in human lymphocytes leading to possible atherogenesis and pathogenesis in microgravity. Since the findings came from microgravity analog experiments, there is a strong link to its usefulness in the microgravity field as a biomarker. It is important to understand, that these findings came from both studies on expression levels of this cardiovascular marker in human lymphocytes in microgravity (in vitro microgravity analog), and a follow up gene expression study in hind limb suspended mice (in vivo microgravity analog). The relevance is enhanced because in life on earth, PIGF is an inflammatory biomarker for cardiovascular disease. Studies on the levels of PIGF would help to reduce the risk and prevention of heart failures in astronauts. If we can use this marker to predict and reduce the risk of cardiac events in astronauts and pilots, it would significantly help aerospace medicine operations. The investigations here confirmed that in a cardiovascular stressed population such as coronary artery disease (CAD) and acute coronary syndrome (ACS) patients, PIGF could be overexpressed. We desired to re-evaluate this marker in patients with cardiovascular disease in our own study. PIGF is a marker of inflammation and a predictor of short-term and long-term adverse outcome in ACS. In addition, elevated PIGF levels may be associated with increased risk for CAD.PIGF levels were determined in thirty-one patients undergoing cardiovascular catheterization for reasons other than ACS and in thirty-three low-risk asymptomatic subjects. Additional data on traditional cardiovascular risk factors for both populations were also compiled and compared. We found that PIGF levels were significantly higher in the high-risk population as compared to low-risk population. Also we were able to ascertain that PIGF levels were inversely correlated with HDL-cholesterol but directly correlated with the triglyceride levels. With further validation, PIGF may prove a useful addition to the armamentarium of noninvasive biomarkers for cardiovascular disease including a new area of stressful physiological conditions such as microgravity.