Non-response to maprotiline caused by ultra-rapid metabolism that is different from CYP2D6?

In this historical prospective study using sera stored for 22 years, we investigated the effect of HTLV-I infection on survival in a population of leprosy patients in the Democratic Republic of the Congo (formerly Zaire). We also determined the distribution of HTLV-I by subpopulation, age, and gender. Stored sera taken from a population of leprosy patients and controls in 1969 were tested for HTLV-I. Follow-up survival data on these patients were obtained in 1991. The sera collected in 1969 from 520 individuals was used to determine the prevalence of HTLV-I. Included in this number were 328 patients resident in the sanatorium. Survival and other data were available for 327 of these. A multivariate survival analysis using a logistic regression model was performed to evaluate the influence of HTLV-I status, age, type of leprosy, gender, duration of hospitalization, and ethnic group on survival. The overall prevalence of HTLV-I among the 520 individuals in the prevalence study was 34%, with 37.4% in the leprosy group and 25.2% in the control group (p < 0.01). Multivariate analysis using logistic regression showed that females of the Mongo and Ngombe ethnic group taken together were significantly more likely to be infected than the other groups (OR = 3.67, 95% CI: 2.14 to 6.30). A comparison of the death rates directly standardized for age and sex showed that the rate was significantly higher for HTLV-I positive (5.5/100 person-years of observation) compared with HTLV-I negative (3.6/100 person-years of observation). A survival analysis using the Cox model showed a risk ratio of 1.4 (CI: 1.04 to 1.89) for those infected with HTLV-I. An increase in the death rate was associated with HTLV-I infection in leprosy inpatients. The decreased survival associated with HTLV-I infection may result from an increased susceptibility to a variety of diseases.     

Process development and adhesion behavior of electroless copper on liquid crystal polymer (LCP) for electronic packaging application

Liquid crystal polymer (LCP) has potentially a very wide application as substrate material in electronic packaging applications because of its unique advantages. The work in this paper was performed to realize the metallization of LCP for the purpose of board fabrication, and to study the adhesion between deposited copper and LCP. A homogenous electroless plated copper layer on LCP with 4 to 5 /spl mu/m thickness was achieved, while it increased up to 40 /spl mu/m with the subsequent electroplating. The timescale of etching, deposit ion rate, and pH value were gradually changing during the plating process and the influences on copper layer quality were investigated. The adhesion force of the copper-LCP layer system was measured by a shear-off-method. Scanning electron microscopy (SEM) was used to check the surface morphology after etching and the interface after shearing on both the backside of the copper layer and the LCP side. The relationship between the shear-off adhesion of copper and the time of chemical etching before plating was examined, and the optimal etching time is discussed. Heat treatment after plating was used, and it was shown that this significantly improved the adhesion strength.     

Ascorbic acid is a stimulatory cofactor for mitochondrial glycerol-3-phosphate dehydrogenase

We describe in this report a sensitive and direct method for the analysis of tamoxifen (TAM) in microsamples of plasma. The drug and internal standard (quinine bisulfate, I.S.) were separated on a 10-microm particle, 10 cm X 8 mm CN cartridge in conjunction with a radial compression system. The mobile phase was a mixture of 0.1 M sodium acetate in 0.001 M tetrabutylammonium phosphate solution (pH 6) and methanol (30:70, v/v) at a flow-rate of 4 ml/min. After addition of I.S. and o-phosphoric acid in acetonitrile (0.6 M) to the plasma (30 microl), the mixture was placed in an ultraviolet shortwave transluminator for 2 min prior to injection into the chromatograph. The compounds were detected in the effluent fluorometrically at excitation and emission wavelengths of 258 and 378 nm, respectively. Under these conditions, no interference in the assay from any endogenous substance or other concurrently used drugs was observed and the retention times of I.S. and TAM were 4.4 and 10.15 min, respectively. The concentration of TAM in plasma was linearly (r>0.9983) related to the peak height ratio (TAM/I.S.) in the range 0.01-2.0 microg ml(-1) and C.V. at 0.075, 0.4 and 1.2 microg ml(-1) was < or = 4.96%. We are currently using this assay for monitoring TAM in plasma and investigating its pharmacokinetics in cancer patients receiving cytotoxic drugs in addition to TAM as a multi-drug resistance modifier.     

Tramadol, M1 metabolite and enantiomer affinities for cloned human opioid receptors expressed in transfected HN9.10 neuroblastoma cells

Tramadol hydrochloride is a centrally acting synthetic analgesic in widespread clinical use. Despite different degrees of opioid-like characteristics in preclinical tests, it is characterized by lack of full naloxone reversibility or naloxone-precipitated withdrawal in humans. To investigate this apparent discrepancy, the present study measured the affinity of tramadol (and its enantiomers) and an active O-desmethyl metabolite (M1) (and its enantiomers) to cloned human opioid receptors of the mu, delta and kappa type stably expressed in HN9.10 neuroblastoma cells. At mu sites, the Ki values for tramadol, its (+) and (-) enantiomers, M1, and its (+) and (-) enantiomers were 17000, 15700, 28800, 3190, 153 and 9680 nM, respectively, compared to 7.1 nM for morphine. These results are consistent with the suggestion of a non-opioid contribution to the clinical profile of tramadol.     

Stereotactic radiosurgery of malignant and benign intracranial lesions utilizing a patient rotator

The objective of this survey was to demonstrate whether a primary care track internal medicine residency program emphasizing community-based health care of the urban sick poor trains physicians who will continue to practice in general internal medicine or similar fields. Thirty-five primary care residents (100% of graduates) who trained from 1976 through 1993 in the Adult Primary Care Track of the Internal Medicine Residency Program at St. Vincent's Hospital, New York were used as participants.     

Responses of ligamentous fibroblasts to mechanical stimulation

Mechanical stimulation, as provided by physiotherapy or controlled motion is essentially the only factor able to improve anterior cruciate ligament (ACL) healing. We investigate the cellular effects of such stimulus. Two types of stimulations are applied on canine ACL fibroblasts: repetitive stretch of an elastomeric adhesion substrate and a laminar flow of culture media over the culture surface. Cell orientation, proliferation rate, synthesis and type of collagen as well as proteoglycans (PG) synthesis and hydrodynamic characteristics have been studied. According to our results, the fibroblasts tend to align perpendicularly to the deformation axis of their substrate, and along a laminar flow. The shear stress induced by the laminar flow does not modify significantly proliferation rate nor extracellular matrix synthesis. Substrate stretching however, increases proliferation rate, collagen synthesis, mostly type III, and PG synthesis, principally of small sizes. The characteristics of fibroblasts submitted to repeated deformation match those of fibroblasts from ligament scar tissues. Their orientation perpendicular to substratum deformation differs from the one usually encountered in the undamaged tissue: aligned on the ligament axis.     

Homogeneity of fruits and vegetables comminuted in a vertical cutter mixer

The homogeneity of comminuted composites of 20 lb samples of apples, cabbage, and green beans containing field-incurred residues of p, p'-methoxychlor was studied to determine whether a 5 min comminution in a 40 qt vertical cutter mixer produces a homogeneous composite and whether the size of test portions used accurately represents the composite. Duplicate test portions of 100, 50, 25, 10, 5, and 2 g taken from each of 6 separate sections of the mixer were analyzed by standard pesticide residue methodology for p, p'-methoxychlor. Results of this study confirmed that comminution of fresh produce in a 40 qt vertical cutter mixer, according to instructions described in the U.S. Food and Drug Administration's Pesticide Analytical Manual, Volume I, Section 203B, produces a homogeneous composite. No significant differences were found in the data for the 3 crops taken from the 6 sections of the mixer. Test portion weights of 100, 50, and 25 g produced equivalent results for all 3 crops. Statistically significant differences were observed for cabbage at 2, 5, and 10 g and for green beans at 2 g.     

Ternary alloying study of MoSi2

Ternary alloying of MoSi₂ with adding a series of transition elements was investigated by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), and energy dispersive spectroscopy (EDS). Iron, Co, Ni, Cr, V, Ti, and Nb were chosen as alloying elements according to the AB₂ structure map or the atomic size factor. The studied MoSi₂ base alloys were prepared by the arc melting process from high-purity metals. The EDS analysis showed that Fe, Co, and Ni have no solid solubility in as-cast MoSi₂, while Cr, V, Ti, and Nb exhibit limited solid solubilities, which were determined to be 1.4±0.7, 1.4±0.4, 0.4±0.1, and 0.8±0.1. Micro-structural characterization indicated that Mo-Si-M_VIII (M_VIII=Fe, Co, Ni) and Mo-Si-Cr alloys have a two-phase as-cast microstructure, i.e., MoSi₂ matrix and the second-phase FeSi₂, CoSi, NiSi₂, and CrSi₂, respectively. In as-cast Mo-Si-V, Mo-Si-Ti, and Mo-Si-Nb alloys, besides MoSi₂ and C40 phases, the third phases were observed, which have been identified to be (Mo, V)₅Si₃, TiSi₂, and (Mo, Nb)₅Si₃.