光漂白法制备有机聚合物非线性定向耦合器

研究了用光漂白的方法制备PMMA/DR1聚合物非线性定向耦合器,提出了一种容易的制备方法来得到要求的耦合长度.测量了材料的光学非线性对定向耦合器两臂透过率的影响.实验结果表明由于光学非线性,耦合器的耦合长度随着入射光强度的改变而发生变化.     

硼酸铝晶须增强环氧树脂和双马来酰亚胺树脂体系的研究

本文以硼酸铝晶须为增强剂，以4，5-环氧环己烷-1，2-二甲酸二缩水甘油酯(TDE-85)，甲基纳狄克酸酐(MNA)、N，N’-二胺基二苯甲烷型双马来酰亚胺(BMI)/O，O′-二烯丙基双酚A(BA)体系分别作为基体制备晶须增强复合材料。研究了晶须对树脂的尺寸、表面处理方法、含量对树脂体系力学性能和热性能的影响；通过扫描电子显微镜(SEM)分析了浇注体的弯曲、冲击断口，研究晶须的增强机理。     

钻探用变量泥浆泵曲轴强度的计算

随着钻探业的不断发展 ,日趋需要大功率的泥浆泵 ,文章介绍了大变量泥浆泵机组中曲轴的设计。     

EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON HORIZONTAL OIL-GAS FLOW

Experiments were carried out to investigate the characteristics of oil-gas flow in a horizontal pipe on a large scale (with the inner diameter D = 125 mm). With the experimental data, the flow patterns were presented. Through the analyses for the flow regime transition, it was found that there was a critical superficial velocity of liquid phase for the flow regime transiting from stratified flow to slug flow. The slug flow could not occur until the superficial velocity of liquid phase was higher than the critical velocity. For the flow pattern transiting from stratified to slug flow, the transmitting velocity of gas phase decreases with the augmentation of superficial velocity of liquid phase. On the basis of the experiments, numerical simulations of different flow patterns and their transitions were performed with the use of the Volume Of Fluid (VOF) technique. The results of the computations are shown to match well with the measured data in the experiments.     

光化学方法活化CO_2为CO的研究进展

介绍了国内外近年来用光化学方法将CO2活化为CO的研究进展。目前,CO2活化为CO的光化学法主要有气相活化法、均相活化法和非均相活化法,对这些方法的特点及反应机理进行了总结。     

苏里格低渗强非均质性气田开发技术对策探讨

鄂尔多斯盆地苏里格气田储集层具有低渗、强非均质性、中强压敏的特点，气井产能低，稳产期短。根据单井模拟及生产动态分析，气井低产量生产可以降低压敏效应的影响，加强气井低产量生产阶段的管理，有利于合理利用地层能量，提高井控外围低渗区储量动用程度；分层压裂、多层合采可以在纵向上充分动用气井控制储量，增加气井最终累计产气量和稳产时间；地质研究与地震相结合，是提高储集层预测精度和钻井成功率的技术关键；降低成本，争取优惠政策也是提高经济效益的有效途径。     

航空自导深弹攻潜效能模型与仿真

文中依据航空自导深弹的战术技术性能,给出了反潜直升机使用航空自导深弹攻潜模型,采用蒙特卡洛法通过计算机仿真,得出了反潜直升机空投航空自导深弹的攻潜效能,并通过仿真结果分析提出了直升机最优的攻潜方法.     

Design of Polarization-independent Wavelength-interleave Coupler in Fluorinated Polyimide Waveguide

Based on the measurement of dispersion characteristic and birefractive index of the fluorinated polyimide film,a statistical optimum design method is proposed and used to realize the design of 32-and 36-wavelengths optical waveguide wavelength-interleave coupler (i,e.,interleaver) with the optimization of polarization fluctuation and wavelength interval of 0.8nm at 1550nm. The largest cross coupling ratios of the two interleavers are respectively less than 1.8% and 3.5%, while the least through coupling ratios are respectively greater than 98. 2% and 96. 5%. The output differences due to polarization fluctuation are less than 1.7% and 3.2%     

生产系统的计算机仿真研究

生产系统在设计与运行过程中面临着诸多的问题需要解决，计算机仿真技术作为一种有效验证生产系统设计合理性和辅助生产管理决策的手段，近年来在我国得到了越来越广泛的关注。该文系统总结了计算机仿真技术对生产系统的重要作用，利用Ithink5.0软件建立了简单生产过程的计算机仿真模型并进行了分析。