GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

A better technique using multisegment modeling and analysis of high-density and high-speed connectors

A useful and rather new simulation technique for connectors up to 6.25 GHz is presented and discussed in this paper. The proposed model extracts electrical parameters of a connector using time-domain reflectometry (TDR) measurements. A new technique was developed to obtain accurate impedance profiles using TDR and a multisegment approach that is effectively a distributed coupled model. The parameter extraction and characterization of connectors are discussed. The performance of the proposed segmented transmission line model is verified by simulation of the model in SPICE and by experimental measurement. The results show that the proposed model can simulate the electrical characteristics, including crosstalk and impedance, of high-density and high-speed connectors with satisfactory accuracy. Based on the proposed modeling and CAD simulators, the design and analysis of complicated high-density and high-speed connectors can be executed accurately and effectively. Compared with other previous models, the proposed model can significantly improve the accuracy of simulation.     

Development of a collaborative CAD/CAM system

This paper presents the development of a collaborative CAD/CAM system (COCADCAM). COCADCAM extends an existing single-location CAD/CAM system to a multi-location CAD/CAM application so that two geographically dispersed CAD/CAM users can work together on a three-dimensional CAD-geometry coediting and CAD-related tasks collaboratively and dynamically. COCADCAM dynamically supports CAD data communication that are not available in traditional single-location CAD/CAM. The dynamic data communication is achieved through the development of networking algorithms and CAD/CAM functions in this paper. The networking algorithms based on UNIX Interprocess Communication (IPC), the Network File System (NFS), and a connection-oriented client and server model under the Transmission Control Protocol/Internet Protocol (TCP/IP) suite. The CAD/CAM functions included surface modelling, simulation of a milling toolpath, and post-processing of an NC program following collaborative CAD-geometry coediting, which are directly or indirectly supported by the Application Programming Interface (API) of the CAD/CAM software. The networking algorithms and CAD/CAM functions together can facilitate an environment for CAD-geometry coediting and related tasks such as design, analysis and manufacture. COCADCAM has been successfully implemented through local area network (LAN) and the Internet; a remote machining cell is also linked so that the generated NC program based on a coedited free-form surface can be used for the physical machining operation. The algorithm proposed by COCADCAM can be referenced for the extension of other single-location CAD/CAM systems to multi-location applications.     

Optimal Speed-Up Parallel Image Template Matching Algorithms on Processor Arrays with a Reconfigurable Bus System,

The image template matching problem is one of the fundamental problems of and has many practical applications in image processing, pattern recognition, and computer vision. It is a useful operation for filtering, edge detection, image registration, and object detection [13]. In this paper, we first design twoO[(M²/p²)log logM] andO[(M²/p²)+(M/p)log logp] time parallel image template matching algorithms on a 3-D processor array with a reconfigurable bus system usingp²N²processors with each processor containingO(1) andO(M/p) restricted memory for 1 ≤p≤M≤N, respectively, for anN×Ndigital image and anM×Mtemplate. By increasing the number of processors, these two proposed algorithms can be run inO(M²/p²) time for speeding up the time complexity usingp²M^1/cN²andp^2+1/cN²processors, respectively, wherecis a constant andc≥1. Furthermore, anO(1) time can be also obtained from these two proposed algorithms by usingM²+1^/cN²processors. These results improve the best known bounds and achieve both optimal and optimal speed-up in their time and processor complexities.     

Mining Web informative structures and contents based on entropy analysis

We study the problem of mining the informative structure of a news Web site that consists of thousands of hyperlinked documents. We define the informative structure of a news Web site as a set of index pages (or referred to as TOC, i.e., table of contents, pages) and a set of article pages linked by these TOC pages. Based on the Hyperlink Induced Topics Search (HITS) algorithm, we propose an entropy-based analysis (LAMIS) mechanism for analyzing the entropy of anchor texts and links to eliminate the redundancy of the hyperlinked structure so that the complex structure of a Web site can be distilled. However, to increase the value and the accessibility of pages, most of the content sites tend to publish their pages with intrasite redundant information, such as navigation panels, advertisements, copy announcements, etc. To further eliminate such redundancy, we propose another mechanism, called InfoDiscoverer, which applies the distilled structure to identify sets of article pages. InfoDiscoverer also employs the entropy information to analyze the information measures of article sets and to extract informative content blocks from these sets. Our result is useful for search engines, information agents, and crawlers to index, extract, and navigate significant information from a Web site. Experiments on several real news Web sites show that the precision and the recall of our approaches are much superior to those obtained by conventional methods in mining the informative structures of news Web sites. On the average, the augmented LAMIS leads to prominent performance improvement and increases the precision by a factor ranging from 122 to 257 percent when the desired recall falls between 0.5 and 1. In comparison with manual heuristics, the precision and the recall of InfoDiscoverer are greater than 0.956.     

Development of the eroded opening during electrochemical boring of hole

Electrochemical machining (ECM) has been increasingly recognized as a potential tool for mini-scale machining. Using the ECM process to erode a hole of hundreds of micrometres on a thin metal sheet is analysed in this paper. The purpose of this study is to predict the hole formation, particularly when boring through the hole. A theoretical method is presented to illustrate how the machined profile evolves. The analysis is based on the fundamental law of electrolysis and the integral of the electrochemical reaction over the finite width of the tool electrode. A concept of redistribution of electric charge is adopted in the model when the hole is bored through. The approach of the model is verified experimentally.     

A study on surface polishing of SiC with a tribochemical reaction mechanism

This work investigates the surface polishing of silicon carbide SiC using the tribochemical reaction mechanism. Different metal discs – cast iron, AISI 304 stainless steel, S45C medium carbon steel plated chromium, brass and copper – are used to polish SiC in water and kerosene, respectively. The experimental results show that ferrous metal discs can effectively polish SiC in water. Also, no surface damage or scratches on the polished surface of SiC are observed by this method. The polishing debris was analyzed by electron spectroscopy for chemical analysis. The analyzed results indicate that the polishing surface of SiC is removed tribochemically with the aid of catalytic effect of iron oxide. Moreover, in this process the maximum material removal rate is about 0.06 m/h.     

Fabrication of Pb1‐xSnxTe/PbTe heterojunctions by liquid phase epitaxy

Abstract

Pb_1‐x Sn _x Te epitaxial layers were successfully grown on PbTe substrates by liquid phase epitaxy (LPE) technique. The compositions and surface morphology of the epitaxial Pb_1‐x Sn _x Te layers were controlled in the LPE growth, and p‐Pb_1‐x Sn _x Te/n‐PbTe heterodiodes with a good junction‐perfection factor were made.     

Data envelopment analysis in resource allocation: An application to forest management

This paper discusses the resource allocation problem for not-for-profit organizations that have control over several production units of similar functions. A case of budget allocation among the subdistricts of a forest district in Taiwan is exemplified to illustrate the idea. The model proposed is a nonlinear fractional program superimposed upon the data envelopment analysis framework. This nonlinear fractional program can be transformed to a model similar to the generalized linear program and solved by a type of decomposition method. Within prespecified ranges, the district office searches for ways of allocating a fixed amount of budget to its subdistricts to result in a higher aggregate efficiency score. Wider ranges allow for more flexibility in allocating budget; consequently, higher aggregate efficiency scores are experienced. Since this method is more objective, it is more persuasive to the subdistricts in allocating resources.