The Effect of High Selenite and Selenate Concentrations on Ferric Oxyhydroxides Transformation under Alkaline Conditions

Iron-based nanomaterials have high technological impacts on various pro-environmental applications, including wastewater treatment using the co-precipitation method. The purpose of this research was to identify the changes of iron nanomaterial’s structure caused by the presence of selenium, a typical water contaminant, which might affect the removal when the iron co-precipitation method is used. Therefore, we have investigated the maturation of co-precipitated nanosized ferric oxyhydroxides under alkaline conditions and their thermal transformation into hematite in the presence of selenite and selenate with high concentrations. Since the association of selenium with precipitates surfaces has been proven to be weak, the mineralogy of the system was affected insignificantly, and the goethite was identified as an only ferric phase in all treatments. However, the morphology and the crystallinity of ferric oxyhydroxides was slightly altered. Selenium affected the structural order of precipitates, especially at the initial phase of co-precipitation. Still, the crystal integrity and homogeneity increased with time almost constantly, regardless of the treatment. The thermal transformation into well crystalized hematite was more pronounced in the presence of selenite, while selenate-treated and selenium-free samples indicated the presence of highly disordered fraction. This highlights that the aftermath of selenium release does not result in destabilization of ferric phases; however, since weak interactions of selenium are dominant at alkaline conditions with goethite’s surfaces, it still poses a high risk for the environment. The findings of this study should be applicable in waters affected by mining and metallurgical operations.     

Anticonvulsive Effects and Pharmacokinetic Profile of Cannabidiol (CBD) in the Pentylenetetrazol (PTZ) or N-Methyl-D-Aspartate (NMDA) Models of Seizures in Infantile Rats

In spite of use of cannabidiol (CBD), a non-psychoactive cannabinoid, in pediatric patients with epilepsy, preclinical studies on its effects in immature animals are very limited. In the present study we investigated anti-seizure activity of CBD (10 and 60 mg/kg administered intraperitoneally) in two models of chemically induced seizures in infantile (12-days old) rats. Seizures were induced either with pentylenetetrazol (PTZ) or N-methyl-D-aspartate (NMDA). In parallel, brain and plasma levels of CBD and possible motor adverse effects were assessed in the righting reflex and the bar holding tests. CBD was ineffective against NMDA-induced seizures, but in a dose 60 mg/kg abolished the tonic phase of PTZ-induced generalized seizures. Plasma and brain levels of CBD were determined up to 24 h after administration. Peak CBD levels in the brain (996 ± 128 and 5689 ± 150 ng/g after the 10- and 60-mg/kg doses, respectively) were reached 1–2 h after administration and were still detectable 24 h later (120 ± 12 and 904 ± 63 ng/g, respectively). None of the doses negatively affected motor performance within 1 h after administration, but CBD in both doses blocked improvement in the bar holding test with repeated exposure to this task. Taken together, anti-seizure activity of CBD in infantile animals is dose and model dependent, and at therapeutic doses CBD does not cause motor impairment. The potential risk of CBD for motor learning seen in repeated motor tests has to be further examined.     

Spermine Derivatives of Indole-3-carboxylic Acid,Indole-3-acetic Acid and Indole-3-acrylic Acid as Gram-Negative Antibiotic Adjuvants

The discovery of new antibiotic adjuvants is an attractive option for overcoming antimicrobial resistance. We have previously reported the discovery of a bis-6-bromoindolglyoxylamide derivative of spermine as being able to enhance the action of antibiotics against Gram-negative bacteria but suffers from being cytotoxic and red-blood cell haemolytic. A series of analogues was prepared exploring variation of the indolglyoxylamide unit, to include indole-3-acrylic, indole-3-acetic and indole-3-carboxylate units, and evaluated for antibiotic enhancing properties against a range of Gram-negative bacteria, and for intrinsic antimicrobial, cytotoxic and haemolytic properties. Two spermine derivatives, bearing 5-bromo-indole-3-acetic acid ( 17 ) and 5-methoxy-indole-3-acrylic acid ( 14 ) end groups were found to exhibit good to moderate antibiotic adjuvant activities for doxycycline towards the Gram-negative bacteria Pseudomonas aeruginosa, Escherichia coli and Klebsiella pneumoniae, but with more modest intrinsic antimicrobial activity and greatly reduced cytotoxic and haemolytic properties. The mechanism of action of the latter derivative identified its ability to disrupt the outer membranes of bacteria and to inhibit the AcrAB-TolC efflux pump directly or by inhibiting the proton gradient.     

Active Light-Powered Antibiofilm ZnO Micromotors with Chemically Programmable Properties

Bacterial biofilms are multicellular communities firmly attached to solid extracellular substrates. They are considered the primary cause of huge economic losses, from medicine due to medical implants’ failure to large infrastructure due to enhanced pipe corrosion. Therefore, their eradication is highly desirable. Here, the preparation of ZnO self-propelled micromotors is reported, programming their morphology and motion properties through Ag doping. The ZnO:Ag micromotors actively move upon light irradiation via a self-electrophoretic mechanism, showing excellent light-controlled on/off switching motion. At the same time, the rapid and effective removal of both gram-positive and gram-negative bacteria biofilms from the solid surface is demonstrated, exploiting the well-known antibacterial activity of both Ag and ZnO as well as the enhanced diffusion of the micromotors. The new concept for the low-cost and scalable preparation of chemically programmable Ag-doped ZnO micromotors here illustrated opens a new route toward the formulation of a new class of light-driven semiconducting self-propelled micromotors for environmental applications.     

Micro-Current Stimulation Has Potential Effects of Hair Growth-Promotion on Human Hair Follicle-Derived Papilla Cells and Animal Model

Recently, a variety of safe and effective non-pharmacological methods have been introduced as new treatments of alopecia. Micro-current electrical stimulation (MCS) is one of them. It is generally known to facilitate cell proliferation and differentiation and promote cell migration and ATP synthesis. This study aimed to investigate the hair growth-promoting effect of MCS on human hair follicle-derived papilla cells (HFDPC) and a telogenic mice model. We examined changes in cell proliferation, migration, and cell cycle progression with MCS-applied HFDPC. The changes of expression of the cell cycle regulatory proteins, molecules related to the PI3K/AKT/mTOR/Fox01 pathway and Wnt/β-catenin pathway were also examined by immunoblotting. Subsequently, we evaluated the various growth factors in developing hair follicles by RT-PCR in MCS-applied (MCS) mice model. From the results, the MCS-applied groups with specific levels showed effects on HFDPC proliferation and migration and promoted cell cycle progression and the expression of cell cycle-related proteins. Moreover, these levels significantly activated the Wnt/β-catenin pathway and PI3K/AKT/mTOR/Fox01 pathway. Various growth factors in developing hair follicles, including Wnts, FGFs, IGF-1, and VEGF-B except for VEGF-A, significantly increased in MCS-applied mice. Our results may confirm that MCS has hair growth-promoting effect on HFDPC as well as telogenic mice model, suggesting a potential treatment strategy for alopecia.     

Fabrication of porous thick films using room-temperature aerosol deposition

A novel technique for the rapid room-temperature deposition of porous ceramic, glass, or metal thick films using the aerosol deposition (AD) method is presented. The process is based on the co-deposition of the desired film material and a second water-soluble constituent, resulting in a ceramic-ceramic composite. Following the subsequent removal of water-soluble end member, a network of pores is retained. To demonstrate the process, porous BaTiO₃ thick films were fabricated through co-deposition with NaCl. Microstructural images show the clear development of a porous structure, which was found to enhance the dielectric properties over dense thick films, possibly related to the lower extent of internal residual stress. This simple but highly effective porous structure fabrication can be applied to any film and substrate material stable in water and is promising for the application of AD-processed films in gas sensors, solid oxide fuel cells, and humidity sensors.     

LONP1 Regulates Mitochondrial Accumulations of HMGB1 and Caspase-3 in CA1 and PV Neurons Following Status Epilepticus

Lon protease 1 (LONP1) is a highly conserved serine peptidase that plays an important role in the protein quality control system in mammalian mitochondria. LONP1 catalyzes the degradation of oxidized, dysfunctional, and misfolded matrix proteins inside mitochondria and regulates mitochondrial gene expression and genome integrity. Therefore, LONP1 is up-regulated and suppresses cell death in response to oxidative stress, heat shock, and nutrient starvation. On the other hand, translocation of high mobility group box 1 (HMGB1) and active caspase-3 into mitochondria is involved in apoptosis of parvalbumin (PV) cells (one of the GABAergic interneurons) and necrosis of CA1 neurons in the rat hippocampus, respectively, following status epilepticus (SE). In the present study, we investigated whether LONP1 may improve neuronal viability to prevent or ameliorate translocation of active caspase-3 and HMGB1 in mitochondria within PV and CA1 neurons. Following SE, LONP1 expression was up-regulated in mitochondria of PV and CA1 neurons. LONP1 knockdown deteriorated SE-induced neuronal death with mitochondrial accumulation of active caspase-3 and HMGB1 in PV cells and CA1 neurons, respectively. LONP1 knockdown did not affect the aberrant mitochondrial machinery induced by SE. Therefore, our findings suggest, for the first time, that LONP1 may contribute to the alleviation of mitochondrial overloads of active caspase-3 and HMGB1, and the maintenance of neuronal viability against SE.     

LiNi1/3Mn1/3Co1/3O2 with morphology optimized for novel concept of 3D Li accumulator

An array of LiNi_1/3Mn_1/3Co_1/3O₂ (NMC 111) samples with a hollow-sphere morphology enabling the use of binder-free, millimeter-thick electrodes in a battery are prepared by a combination of ball milling, hydrothermal treatment and calcination. Materials are studied by powder X-ray diffraction, nitrogen adsorption measurements, X-ray fluorescence analysis, and scanning electron microscopy. Their electrochemical performance for Li⁺ extraction/insertion is tested by cyclic voltammetry and galvanostatic chronopotentiometry on thin-film electrodes. Optimized materials, prepared by mechanical and thermal treatment with surface areas of 7 to 10 m² g⁻¹, provide charge capacity values of 141 to 156 mAh g⁻¹. The concentration of the crystalline phase in NMC 111 materials with a hollow-sphere morphology is found to be the decisive parameter for their galvanostatic cycling stability. Hollow spheres with well-developed NMC nanocrystals and a low concentration of amorphous phase in the walls, exhibiting excellent cycling stability and charge capacity in thin-film electrodes are incorporated into a NMC/graphite 3D-battery module. This 122 Ah/451 Wh 3D-battery provides 78% of theoretical capacity and 73% of theoretical energy after 10 formatting cycles. Additionally, the battery prototype exhibits stable performance over more than 200 cycles at C/10 rate. A series of analogous 3D Li accumulators, currently assembled and tested in a pilot plant, represent the first step toward large-scale production of novel 3D Li accumulator.     

Yeast sequencing reports. CAN1, a gene encoding a permease for basic amino acids in Candida albicans

The first gene coding for an amino-acid permease of Candida albicans was sequenced. The DNA fragment complementing the lysine-permease deficiency was 3385 bp long. An open reading frame of 1713 nucleotides was found encoding a protein of 571 amino acids, with a calculated molecular weight of 63 343. Analysis of the deduced primary structure revealed ten membrane spanning regions and three potential N-glycosylation sites. The protein sequence is strongly homologous to both permeases for basic amino acids (Can1 and Lyp1) of Saccharomyces cerevisiae. C-terminal part of another ORF (105 aa), highly homologous to the gene HAL2 of S. cerevisiae, was found 133 bp downstream, and in tail-to-tail orientation to the permease gene. The sequence data will appear in the EMBL/GenBank/DDBJ Nucleotide Sequence Data Libraries under the accession number X76689.