Thermal performance and embodied energy analysis of a passive house – Case study of vault roof mud-house in India

This paper investigates thermal performance of an existing eco-friendly and low embodied energy vault roof passive house (or mud-house) located at Solar Energy Park of IIT Delhi, New Delhi (India). Based on embodied energy analysis, the energy payback time for the mud-house was determined as 18 years. The embodied energy per unit floor area of R.C.C. building (3702.3 MJ/m²) is quiet high as compared to the mud-house (2298.8 MJ/m²). The mud-house has three rooms with inverted U-shape roof and remaining three rooms with dome shape roof. A thermal model of the house consisting of six interconnected rooms was developed based on energy balance equations which were solved by using fourth order Runge Kutta numerical method. The predicted six room air temperatures were found in good agreement with the experimental observed data on hourly basis in each month for one year. The annual heating and cooling energy saving potential of the mud-house was determined as 1481 kW h/year and 1813 kW h/year respectively for New Delhi composite climate. The total mitigation of CO₂ emissions due to both heating and cooling energy saving potential was determined as 5.2 metric tons/year. The annual carbon credit potential of mud-house was determined as € 52/year. Similar results were obtained for the different climatic locations in India.     

Make3D: Learning 3D Scene Structure from a Single Still Image

We consider the problem of estimating detailed 3D structure from a single still image of an unstructured environment. Our goal is to create 3D models that are both quantitatively accurate as well as visually pleasing. For each small homogeneous patch in the image, we use a Markov Random Field (MRF) to infer a set of "plane parameters” that capture both the 3D location and 3D orientation of the patch. The MRF, trained via supervised learning, models both image depth cues as well as the relationships between different parts of the image. Other than assuming that the environment is made up of a number of small planes, our model makes no explicit assumptions about the structure of the scene; this enables the algorithm to capture much more detailed 3D structure than does prior art and also give a much richer experience in the 3D flythroughs created using image-based rendering, even for scenes with significant nonvertical structure. Using this approach, we have created qualitatively correct 3D models for 64.9 percent of 588 images downloaded from the Internet. We have also extended our model to produce large-scale 3D models from a few images.     

In vitro biocompatibility and antimicrobial activity of chitin monomer obtain from hollow fiber membrane

This study for the first time shows the effective utilization and production of chitin monomers at laboratory level, with immense potential for its biomedical application. Low molecular weight (LMW) N-acetylglucosamine (GlcNAc) is prepared by depolymerization of chitin using chemical method coupled with a physical separation method. A novel filtration strategy exploiting polysulfone hollow fiber membrane is used for the preparation of GlcNAc particles with 94% yield within 8.5 ± 0.5 h. This high efficiency is analyzed using high-pressure liquid chromatography. The GlcNAc obtained was further analyzed using dynamic light scattering, first derivative Fourier transform infrared spectroscopy, and X-ray diffraction techniques. The antimicrobial properties of GlcNAc, chitin, and GlcNAc/chitin mixture were investigated using minimal inhibitory concentration against S. aureus and E. coli. Bacteriostatic property was exhibited by high molecular weight chitin, while GlcNAc and GlcNAc/chitin mixture (LMW) demonstrated bactericidal activity. Blood biocompatibility below 0.25 g/ml and cytocompatibility with NIH3T3 fibroblast cells and the proliferative efficacy suggested its utilization and suitability of these particles in biological applications.     

Shear velocity-based uncertainty quantification for rock joint shear strength

Bulletin of Engineering Geology and the Environment - The shear strength of rock joints is an important property required in order to analyze the stability of rock slopes and tunnels. However,...     

Segregation and intermixing in polydisperse liquid–solid fluidized beds: A multifluid model validation study

Multifluid model (MFM) simulations have been carried out on liquid–solid fluidized beds (LSFB) consisting of binary and higher-order polydisperse particle mixtures. The role of particle–particle interactions was found to be as crucial as the drag force under laminar and homogenous LSFB flow regimes. The commonly used particle–particle closure models are designed for turbulent and heterogeneous gas–solid flow regimes and thus exhibit limited to no success when implemented for LSFB operating under laminar and homogenous conditions. A need is perceived to carry out direct numerical simulations of liquid–solid flows and extract data from them to develop rational closure terms to account for the physics of LSFB. Finally, a recommendation flow regime map signifying the performance of the MFM has been proposed. This map will act as a potential guideline to identify whether or not the bed expansion characteristics of a given polydisperse LSFB can be correctly simulated using MFM closures tested.     

Gas permeation in thin films of “high free-volume” glassy perfluoropolymers: Part I. Physical aging

Physical aging of both thick and thin films of “high free-volume” glassy perfluoropolymers was studied by monitoring changes in pure gas permeability of O₂, N₂ and CH₄. All permeability measurements were done at a fixed temperature of 35 °C for more than 1000 h of aging. Two grades of perfluoropolymers, Teflon AF and Hyflon AD, having different comonomer structures but with similar comonomer ratios were studied to understand the effect of comonomer type and content on the aging behavior. The effect of casting process (solution vs. spin coating) and solvent type (vapor pressure and boiling point) had a significant effect on the absolute permeability of both thick and thin films; however, the aging rates were more affected by thickness and solvent type rather than the casting process for similar thicknesses. After 1000 h of aging, the relative permeability for thin films of Teflon AF 2400 was decreased by 27% compared to only 10% for thick films prepared from Novec 7500 solvent. Teflon AF, which has a higher fractional free volume (FFV) than Hyflon AD, is believed to undergo significant aging well before the initial permeability measurement could be made (after ∼ 1 h of aging) and, therefore, Teflon AF materials showed a lower decrease in relative permeability compared to Hyflon AD for the same aging time. The comonomer type and content has a significant effect on the permeability; the initial absolute oxygen permeability for AF 2400 was an order of magnitude higher compared to AD 60. The physical aging of thin films of the various glassy perfluoropolymers was also tracked by recording changes in the refractive index and thickness with time by ellipsometry. The ellipsometry data also confirmed higher aging rates in Hyflon AD compared to Teflon AF materials. The volumetric aging rate, obtained from the change in the refractive index using the Lorentz–Lorenz equation, and the permeability reduction rate from the (P_1000h/P_1h) ratio showed an excellent linear correlation. The (P_1000h/P_1h) ratio also showed a stronger correlation with (T_g−35) °C than with FFV.     

A monolithically integrated high‐efficiency Cu(In,Ga)Se2 mini‐module structured solely by laser

Monolithically integrated Cu(In,Ga)Se₂ mini‐modules were fabricated in order to reduce the width of patterning related dead area. The Cu(In,Ga)Se₂ layers were prepared on soda‐lime glasses using the multistage process at low substrate temperature below 500 °C. A picosecond laser with a wavelength of 532 nm was used for all of the structuring processes (P1, P2, and P3) for the monolithic integration. A “lift‐off” type structuring was applied for P1 and P3, and an “ablation” type was for P2. The laser structuring was optimized to be minimizing the dead area width, and the width of about 70 µm was successfully achieved. A mini‐module, in which the optimized structuring processes were applied for the integration, demonstrated a certified efficiency of 16.6%. Copyright © 2015 John Wiley & Sons, Ltd.