Impact of soil water content on maize responses to the plant growth-promoting rhizobacterium Azospirillum lipoferum CRT1

Members of the bacterial genus Azospirillum are root-associated bacteria that increase yield in cereals by promoting growth and alleviating drought stress. How plants integrate the many bacterium-derived growth-promoting stimuli with other environmental factors to generate a coordinated response remains unresolved. Using a commercial Azospirillum strain, A. lipoferum CRT1 and two host maize cultivars, it was observed that bacterization reduced the drought-induced increase in lateral root growth and enhanced the flood-induced increase in lateral root growth in the more drought- and flood-sensitive cultivar. In the other one, A. lipoferum CRT1 only elicited a moderate root growth response under low soil water potential. The photosynthetic potential and activity were increased in the earlier cultivar and decreased in the later one, irrespective of the soil water content. No impact of the bacterium was seen on the growth of the leaves of both cultivars under both stresses until the third leaf stage, therefore suggesting that it is a consequence of multiple primary adaptations to biotic and abiotic stresses. It is suggested that host–bacteria recognition leads to a stress-specific modulation of the root response and a differential stress-independent effect on photosynthesis. This is the first report of the impact of Azospirillum under flood conditions.     

Impact of weather variables and season on sporulation of Phytophthora pluvialis and Phytophthora kernoviae

Phytophthora pluvialis and Phytophthora kernoviae are the causal agents of important needle diseases on Pinus radiata in New Zealand. Little is known about the epidemiology of the diseases, making the development of control strategies challenging. To investigate the seasonality and climatic drivers of sporulation, inoculum traps, consisting of pine fascicles floating on water in plastic containers, were exchanged fortnightly at five sites in P. radiata plantations between February 2012 and December 2014. Sections of needle baits were plated onto selective media and growth of Phytophthora pluvialis and P. kernoviae recorded. To explore the generalizability of these data, they were compared to detection data for both pathogens from the New Zealand Forest Health Database (NZFHDB). Further, equivalent analyses on infection of Rhododendron ponticum by P. kernoviae in Cornwall, UK allowed the comparison of the epidemiology of P. kernoviae across different host systems and environments. In New Zealand, inoculum of P. pluvialis and P. kernoviae was detected between January–December and March–November, respectively. Inoculum of both species peaked in abundance in late winter. The probability of detecting P. pluvialis and P. kernoviae was greater at lower temperatures, while the probability of detecting P. pluvialis also increased during periods of wet weather. Similar patterns were observed in NZFHDB data. However, the seasonal pattern of infection by P. kernoviae in the UK was the opposite of that seen for sporulation in New Zealand. Phytophthora kernoviae was likely limited by warmer and drier summers in New Zealand, but by colder winter weather in the UK. These results emphasize the importance of considering both environmental drivers and thresholds in improving our understanding of pathogen epidemiology.     

Innovation strategies for smart specialisation (RIS3): Past,present and future research

The recent change in the regional development strategy of the European Union (EU) results in an important need to study the terms of change and their respective implications. This study seeks, through a bibliometric analysis, to ascertain the developments taking place in studies on research and innovation strategies for smart specialisation (RIS3) to identify shortcomings and opportunities for future research. This bibliometric review drew upon the Scopus database with the sample selected containing all the articles containing the keywords “Research and Innovation Strategies for Smart Specialisation” or “RIS3.” This correspondingly reports how some authors maintain that the path the EU should take involves imitative innovation. Meanwhile, others propose that each region should specialise in those industries that are already established there and thus avoid targeting any areas they do not already know/specialise in. Our findings detail six clusters in RIS3 research, which help in contextualising the literature review: (a) business discovery; (b) smart specialisation; (c) innovation; (d) specialisation; (e) regional policies; and (f) regional development. This study furthermore sets out perspectives for future lines of research and correspondingly seeks to convey a vast theoretical basis that may serve as the point of departure for future studies.     

The impact of external knowledge sourcing on innovation outcomes in rural and urban businesses in the U.S.

This paper examines the relationship between external knowledge sourcing and a diverse set of innovation outcomes in rural and urban establishments in the U.S. Existing studies in the broader knowledge management literature principally examine firms in a single industry, overwhelmingly rely on patent data to proxy for innovation, and cannot account for the innovations of businesses in rural American markets. By addressing these limitations using data from the 2014 Rural Establishment Innovation Survey of the USDA's Economic Research Service, this research provides novel insights into how externally acquired knowledge by American establishments may support innovation. Results of the analysis suggest that external knowledge sourcing may specifically promote product, process, and green innovation in U.S. firms. While collective results when external sources of information are divided by industry orientation fail to show that sources outside of a firm's industry play a dominant role in the innovation processes of American establishments in general, findings provide evidence for an outsized impact of these relationships within rural establishments specifically and suggest that external knowledge sourcing from extra‐industry organizations is most critical for promoting successful innovation in rural firms. Results additionally indicate that knowledge sourcing from non‐local organizations may be more important for supporting innovation in rural compared to urban markets.     

The role of ear environment in postharvest susceptibility of maize to toxigenic Aspergillus flavus

A kernel screening assay (KSA) was used to assess the genetic and environmental effects on the vulnerability of maize to aflatoxin accumulation. Kernels of 26 inbred lines that had been grown in seven environments, and 190 lines of the Intermated B73xMo17 (IBM) population grown in one location in the United States, were inoculated with a toxigenic strain of A. flavus and incubated in the dark at 30°C for 6 days. Percent kernel colonization (PKC), sporulation and aflatoxin were influenced by the maize genotypes (G), the location (“ear environment” or E) and the GxE interactions. Overall, low broad‐sense heritabilities were observed for PKC, sporulation and aflatoxin. PKC was significantly correlated with sporulation in all environments. Aflatoxin was positively correlated with colonization for two and with sporulation for all ear environments. Higher grain sulphur or magnesium in IBM was associated with less colonization or aflatoxin. Postharvest susceptibility of maize to aflatoxin is thus influenced by factors that are modulated by the ear environment. In a KSA, sporulation could be a proxy test for aflatoxin accumulation.     

Development of colchicine‐induced tetraploid St. Augustinegrass (Stenotaphrum secundatum) lines

St. Augustinegrass is well suited for lawns and commercial landscapes. While many genotypes are cross‐fertile, all cultivars are propagated vegetatively in sod production. To ensure varietal purity, development of sterile triploid hybrids by crossing tetraploid and diploid genotypes has been successfully used in other warm‐season turfgrasses. Applying this model in St. Augustinegrass would be beneficial to sod producers and turf managers who require purity for certification and uniformity for performance, respectively. This study was conducted to develop colchicine‐induced tetraploid lines of St. Augustinegrass. Seeds of cultivar ‘Raleigh’ were treated with four colchicine concentrations at four exposure times. A non‐treated control was included among the treatments. Seedlings that germinated were screened for genome size changes using flow cytometry. Line DSA 13005 and two progeny lines derived through selfing, DSA 16001 and DSA 16016, were corroborated as tetraploids (2n = 4x = 36) through chromosome counts. These lines will be used in future breeding efforts to attempt development of sterile triploid cultivars of St. Augustinegrass.     

Conductive 3D structure nanofibrous scaffolds for spinal cord regeneration

The complex nature of spinal cord injuries has provided much inspiration for the design of novel biomaterials and scaffolds which are capable of stimulating neural tissue repair strategies. Recently, conductive polymers have gained much attention for improving the nerve regeneration. In our previous study, a three-dimensional (3D) structure with reliable performance was achieved for electrospun scaffolds. The main purpose in the current study is formation of electrical excitable 3D scaffolds by appending polyaniline (PANI) to biocompatible polymers. In this paper, an attempt was made to develop conductive nanofibrous scaffolds, which can simultaneously present both electrical and topographical cues to cells. By using a proper 3D structure, two kinds of conductive scaffolds are compared with a non-conductive scaffold. The 3D nanofibrous core-sheath scaffolds, which are conductive, were prepared with nanorough sheath and aligned core. Two different sheath polymers, including poly(lactic-co-glycolic acid) PLGA and PLGA/PANI, with identical PCL/PANI cores were fabricated. Nanofibers of PCL and PLGA blends with PANI have fiber diameters of 234±60.8 nm and 770±166.6 nm, and conductivity of 3.17×10^-5 S/cm and 4.29×10^-5 S/cm, respectively. The cell proliferation evaluation of nerve cells on these two conductive scaffolds and previous non-conductive scaffolds (PLGA) indicate that the first conductive scaffold (PCL/ PANI-PLGA) could be more effective for nerve tissue regeneration. Locomotor scores of grafted animals by developed scaffolds showed significant performance of non-conductive 3D scaffolds. Moreover, the animal studies indicated the ability of two new types of conductive scaffolds as spinal cord regeneration candidates.     

Proteomic profiles during adventitious rooting of Eucalyptus species relevant to the cellulose industry

New Forests - Adventitious rooting (AR) is an obligatory step for vegetative propagation of commercial woody species. Paper industries have interest in Eucalyptus globulus Labill and its hybrids...     

Effect of nitrogen root zone fertilization on rice yield,uptake and utilization of macronutrient in lower reaches of Yangtze River,China

Improper application of nitrogen (N) has led to high N losses and low N use efficiency in the lower reaches of Yangtze River in China. An effective method to solve such problems is the deep fertilized N in root zone (RZF). Limited information is available on the effect of RZF on the uptake of macronutrients (N, P and K) and rice yield. Field experiments, conducted from 2014 to 2015, compared the farmer fertilizer practice (FFP, with 225 kg ha^?1 of N, split into three doses) and RZF using the same rate but placing N 5 cm away from rice roots in holes 10 cm deep (RZF10) or 5 cm deep (RZF5) as a single application. The highest mean yield (10.0 t ha^?1) was obtained in RZF10, which was 19.5% more than that in FFP. Root zone fertilization of urea (whether 10 cm deep or 5 cm deep) resulted in greater accumulation of N, P and K in stem, leaf sheaths, leaf blades and grains compared to that in FFP in sandy and in loam soils. The uptake of N, P and K was the highest in RZF10 (average at 176.7, 66.2 and 179.1 kg ha^?1, respectively), higher than that in FFP by 45.0, 17.0 and 22.6%, respectively. N apparent recovery efficiency was markedly higher in RZF10 (53.1%) than in FFP (27.5%). RZF10 significantly increased the N, P, K uptake compared with FFP under different N rates in both sandy and loam soils. These results suggest that the N, P and K input amount should be re-determined under RZF.     

Revisiting rice breeding methods – evaluating the use of rapid generation advance (RGA) for routine rice breeding

Rice production needs to increase in the future in order to meet increasing demands. The development of new improved and higher yielding varieties more quickly will be needed to meet this demand. However, most rice breeding programmes in the world have not changed in several decades. In this article, we revisit the evidence in favour of using rapid generation advance (RGA) as a routine breeding method. We describe preliminary activities at the International Rice Research Institute (IRRI) to re-establish RGA on a large scale as the main breeding method for irrigated rice breeding. We also describe experiences from the early adoption at the Bangladesh Rice Research Institute. Evaluation of RGA breeding lines at IRRI for yield, flowering time and plant height indicated transgressive segregation for all traits. Some RGA lines were also higher yielding than the check varieties. The cost advantages of using RGA compared to the pedigree method were also empirically determined by performing an economic analysis. This indicated that RGA is several times more cost effective and advantages will be realized after 1 year even if facilities need to be built. Based on our experience, and previous independent research empirically testing the RGA method in rice, we recommend that this method should be implemented for routine rice breeding in order to improve breeding efficiency.