The musculoskeletal system complaints of office workers at a vehicle production factory

This study aimed to determine the prevalence of and factors contributing to musculoskeletal system complaints (MSC) in office workers of a vehicle production factory and absenteeism due to these complaints. A total of 86.2% (n = 333) of the workers completed the survey. Of the workers, 73 (21.9%) were women, and 260 (78.1%) were men, and the mean age was 36.9 ± 8.75 years. The majority of the personnel had more than one symptom with a prevalence of 80.8%. The most frequently observed discomfort was tension and pain in the back muscles (58.6%) and in the neck muscles (58.3%), followed by low back pain (41%) and shoulder pain (30.3%). Pain in the shoulders, neck, and the back and pain and numbness in the fingers were statistically significantly more prevalent in employees who spent more than 5 hours per day performing desk work. Furthermore, all of the complaints, excluding pain in the elbows and knees, were statistically significantly more common in the women. When each complaint and the effects of contributing risk factors were analyzed by logistic regression analysis, pain in the shoulders, neck, and back; pain that spread to the arms; and pain in the fingers were correlated with longer work hours and the female gender (p < 0.05). The number of employees who had used sick leave within the past year due to MSCs was 11.7%. In conclusion, duration of work hours, frequency of breaks, and gender were determined as the most important risk factors in computer users regarding MSCs. © 2011 Wiley Periodicals, Inc.     

超空泡水下航行器定深控制研究

极高的航速使得对超空泡水下航行器的控制变得异常复杂. 为了对其深度进行有效控制, 必须对其纵平面运动特性进行研究. 本文首先建立了超空泡水下航行器的纵平面运动模型, 分析了其纵平面运动特性; 然后进行了控制算法的综合; 最后, 仿真及试验结果均验证了所设计的航行器纵平面运动控制算法的有效性. 试验结果表明该控制系统具有较高的控制精度. 本文的研究成果为进一步研究水下超空泡航行器的运动控制提供了必要的理论基础.     

Integration of product design,process planning,scheduling, and FMS control using XML data representation

An efficient model for communications between CAD, CAPP, and CAM applications in distributed manufacturing planning environment has been seen as key ingredient for CIM. Integration of design model with process and scheduling information in real-time is necessary in order to increase product quality, reduce the cost, and shorten the product manufacturing cycle. This paper describes an approach to integrate key product realization activities using neutral data representation. The representation is based on established standards for product data exchange and serves as a prototype implementation of these standards. The product and process models are based on object-oriented representation of geometry, features, and resulting manufacturing processes. Relationships between objects are explicitly represented in the model (for example, feature precedence relations, process sequences, etc.). The product model is developed using XML-based representation for product data required for process planning and the process model also uses XML representation of data required for scheduling and FMS control. The procedures for writing and parsing XML representations have been developed in object-oriented approach, in such a way that each object from object-oriented model is responsible for storing its own data into XML format. Similar approach is adopted for reading and parsing of the XML model. Parsing is performed by a stack of XML handlers, each corresponding to a particular object in XML hierarchical model. This approach allows for very flexible representation, in such a way that only a portion of the model (for example, only feature data, or only the part of process plan for a single machine) may be stored and successfully parsed into another application. This is very useful approach for direct distributed applications, in which data are passed in the form of XML streams to allow real-time on-line communication. The feasibility of the proposed model is verified in a couple of scenarios for distributed manufacturing planning that involves feature mapping from CAD file, process selection for several part designs integrated with scheduling and simulation of the FMS model using alternative routings.     

Predictive functional control based on an adaptive fuzzy model of a hybrid semi-batch reactor

In this paper a new approach to the control of a nonlinear, time-varying process is proposed. It is based on a recursive version of the fuzzy identification method and predictive functional control. First, the recursive fuzzy identification method is derived, after which it is used in connection with fuzzy predictive functional control to construct an adaptive fuzzy predictive functional controller. The adaptive FPFC is then tested on a nonlinear, time-varying, semi-batch reactor process and compared with the standard FPFC, which uses non-adaptive fuzzy model. The simulation results are promising; they indicate that the control of time-varying, nonlinear processes with the FPFC can be improved with the use of an adaptive fuzzy model. An improvement in reference tracking and disturbance rejection can be observed, but the main advantage is the reduced number of switchings between hot and cold water. This is an important improvement in the case of real applications.     

Dynamics analysis of a new simple chaotic attractor

In this paper, a novel simple chaotic system is discussed. Some basic dynamical properties, such as Lyapunov exponents, Poincaré mapping, fractal dimension, bifurcation diagram, continuous spectrum and chaotic dynamical behaviors of the novel chaotic system are studied, either numerically or analytically. The obtained results show clearly that the system discussed in this Letter is a novel chaotic system and deserves a further detailed investigation.     

Bee colony optimization for the p-center problem

Bee colony optimization (BCO) is a relatively new meta-heuristic designed to deal with hard combinatorial optimization problems. It is biologically inspired method that explores collective intelligence applied by the honey bees during nectar collecting process. In this paper we apply BCO to the p-center problem in the case of symmetric distance matrix. On the contrary to the constructive variant of the BCO algorithm used in recent literature, we propose variant of BCO based on the improvement concept (BCOi). The BCOi has not been significantly used in the relevant BCO literature so far. In this paper it is proved that BCOi can be a very useful concept for solving difficult combinatorial problems. The numerical experiments performed on well-known benchmark problems show that the BCOi is competitive with other methods and it can generate high-quality solutions within negligible CPU times.     

Quart-parametric interpolations for intersecting paths

The intersecting path is an important tool path generation method. This paper proposes an approach for the quart-parametric interpolation of intersecting paths. The objective of our approach is that the intersecting paths for surface machining can be directly interpolated within the computer numerical control (CNC) system. This enables the CNC interpolator to process the intersecting paths without geometric approximation as in existing approaches and take into consideration any specific feedrate profiles and further machining dynamical issues along the path.The interpolation of the intersection of two general parametric surfaces is transferred into interpolation of its projection curves and the time trajectories of four parameters along the intersecting curves are obtained. Our strategy is to carry out the quart-parametric interpolation based on the projection interpolation. The feedrate control method is developed, and then the interpolation algorithms for two projection curves are proposed. An error reduction scheme is presented to alleviate point deviation from the drive parametric surface. Simulations of quart-parametric interpolation have been carried out to verify the effectiveness of the proposed algorithm.     

Using cross-layer metrics to improve the performance of end-to-end handover mechanisms

Network centric handover solutions for all IP wireless networks usually require modifications to network infrastructure which can stifle any potential rollout. This has led researchers to begin looking at alternative approaches. Endpoint centric handover solutions do not require network infrastructure modification, thereby alleviating a large barrier to deployment. Current endpoint centric solutions capable of meeting the delay requirements of Voice over Internet Protocol (VoIP) fail to consider the Quality of Service (QoS) that will be achieved after handoff. The main contribution of this paper is to demonstrate that QoS aware handover mechanisms which do not require network support are possible. This work proposes a Stream Control Transmission Protocol (SCTP) based handover solution for VoIP called Endpoint Centric Handover (ECHO). ECHO incorporates cross-layer metrics and the ITU-T E-Model for voice quality assessment to accurately estimate the QoS of candidate handover networks, thus facilitating a more intelligent handoff decision. An experimental testbed was developed to analyse the performance of the ECHO scheme. Results are presented showing both the accuracy of ECHO at estimating the QoS and that the addition of the QoS capabilities significantly improves the handover decisions that are made.     

Betriebsinformatik und Wirtschaftsinformatik als notwendige anwendungsbezogene Ergänzung einer allgemeinen Informatik – Vorschläge zur Verbesserung der akademischen Ausbildung auf dem Gebiet der automatisierten Datenverarbeitung in der Bundesrepublik Deutschland

Zusammenfassung  Nachdruck eines Aufsatzes aus elektronische datenverarbeitung 11(11)1969:544–548. This article is also available in English via and : Grochla E (2008) Corporate Information Systems Engineering and Business and Information Systems Engineering as a Necessary Application-Oriented Extension of General Computer Science – Proposals for Enhancing Academic Education in the Field of Automated Data Processing in the Federal Republic of Germany. Bus Inf Syst Eng. doi .

---