On trading wavelengths with fibers: a cost-performance based study

We consider the effect of multiple fibers on wavelength division multiplexing networks without wavelength conversion. We study networks with dynamic wavelength routing and develop accurate analytical models to compare various possible options using single- and multiple-fiber networks. We use results of an analytical model and simulation-based studies to evaluate the blocking performance and cost of multifiber networks. The number of fibers required providing high performance in multifiber networks and their costs are compared. A case is made for using multiple fibers in each link with fewer wavelengths instead of using a single fiber with many wavelengths. In particular, we show that a network with four fibers per link and with four wavelengths on each fiber without any wavelength conversion on any node yields similar same performance as the networks with one fiber per link and 16 wavelengths per fiber on each link and with full wavelength conversion capability on all nodes. In addition, the multifiber network may also offer the cost advantage depending on the relative cost of components. We develop a parametric cost model to show that multiple fibers in each link are an attractive option. Finally, such multifiber networks also has fault tolerance, with respect to a single fiber failure, already built into the system.     

A Fast π/4-DQPSK Demodulation Arithmetic and Realization

The modulated signals of π /4-DQPSK can be demodulated with the differenced method,and the technology has been used in the communication. The traditional demodulated method needs a lot of calculation. In this paper, a new method based on fast arithmetic digital demodulation of DQPSK is presented. The new method only uses the sign of the modulated signal instead of digital signal through the A/D in the traditional method. With the new method, the system has higher speed, and can save some hardware in the FPGA. An experiment of the new method with the DQPSK is given in this paper.     

基于可靠性评价的含缺陷核压力管道疲劳寿命预测方法

含缺陷压力管道经缺陷评定合乎使用后,其疲劳寿命的估计具有重要的工程意义。将整个含缺陷压力管道作为一个整体,分析了含缺陷压力管道的疲劳裂纹扩展特点,提出了相应的含缺陷压力管道疲劳寿命的计算过程,并在基于可靠性评价的基础上,给出了核压力管道的可接受失效概率,最终得到了含缺陷核压力管道疲劳寿命预测方法。     

利用补充分组编码降低MIMO-OFDM系统峰均比

多输入多输出正交频分复用（MIMO—OH）M）系统已成为第四代移动通信系统研究中的热点，而OFDM系统产生的高峰均功率比（PAPR）是限制MIMO—OFDM技术实用化的主要障碍之一。详细介绍了补充分组编码技术的基本原理，并通过仿真与测试的结论与其他编码技术进行了比较，验证了此编码技术对降低峰均功率比确实具有很好的效果。     

基于谐振原理的硅微机械加速度计

基于力学振动原理 ,导出敏感梁类谐振振动的微分方程 ,给出了振梁型加速度计的设计原理。指出了加速度计谐振梁频率的相对变化量与梁的厚度无关 ;为避免输出非线性频率信号 ,频率的相对变化率和激励振动的振幅都不宜太大     

数值试井在白6-2井测试资料分析评价中的应用

数值试井是在近来发展的一项新的试井解释技术，具有处理非均质，复杂边界油气藏问题的优点，弥补了常规解析试井技术的不足。运用数值试井解释技术，结合动、静态资料，通过对白6-1断块白6-2井测试资料的综合分析评价，确定了储层渗流参数，落实了该气藏的边界情况，为该断块下一步开发提供可靠依据。     

Phosphorus‐containing polyaryloxydiphenylsilanes with high flame retardance arising from a phosphorus–silicon synergistic effect

Polyaryloxydiphenylsilanes were prepared from phosphorus‐containing diols and diphenydichlorolsilane through solution polymerization. With a stoichiometric imbalance in feed monomers, the resulting polymers exhibited moderate melting points and good processing properties. The polymers prepared showed initial decomposition temperatures above 340 °C, excellent thermal stability, high char yields at 850 °C and very high limited oxygen index values of 56–59. The polymers' char yields and their (P + Si) contents showed linear relationships. © 2003 Society of Chemical Industry     

最新MDAC中的安全特征

本文描述数据访问组件MDAC(Microsoft Data Access Components)的结构与编程接口,分析了MDAC缓冲区溢出安全漏洞的原因,最后阐述了最新MDAC2.8的安全特征.     

温度采集仪调理电路的isp实现技术

介绍温度采集仪调理电路的结构及工作原理,简单介绍在系统可编程模拟器件ispPAC10的基本结构,并借助于PAC Designer软件详细描述ispPAC10实现温度采集仪数据放大器具体方法和步骤。与传统的模拟电路设计方法相比,运用isp技术实现的温度采集仪调理电路具有简洁可靠、开发周期短等特点。     

关于通信导航设备电源防雷的探讨

根据通信导航设备在雷击中的损坏现象，提出了电源防雷措施，即实施分级保护，在多雷区配置防雷变压器。简单介绍了级间配合，抑制横向过电压的产生，以及接地阻抗的简单计算和正确选用等，以达到对电源系统的有效防雷保护。