Evolution of BET internal surface area in glassy carbon powder during thermal oxidation

It is demonstrated that glassy carbon powder can be thermochemically activated. During activation, a film with open pores is created on the glassy carbon particles. This film has a large internal surface area, which is accessible to liquids and gases. A simple model for the evolution of the internal surface area in glassy carbon powder during thermochemical gas-phase oxidation is also presented and compared with experimental data. Experimental results are in qualitative agreement with the model. We found that a sharp particle size distribution is desirable with regard to potential technical applications.     

On-line H NMR spectroscopic investigation of hydrogen bonding in supercritical and near critical CO2–methanol up to 35 MPa and 403 K

On-line NMR spectroscopy can beneficially be applied to studies of supercritical and near-critical fluids as an alternative to optical spectroscopy. Up to now high pressure NMR experiments are predominantly accomplished using custom made NMR batch reactors. The authors present a novel high pressure cell with displacement plunger for on-line NMR experiments on compressible fluids which can be used in conjunction with commercially available SCF NMR flow probes. The on-line technique offers advantages compared to stopped flow techniques such as enhanced control of mixture composition and reaction parameters as well as the facility of engagement into the reaction. The new apparatus is used for NMR studies on hydrogen bonding of methanol in near critical and supercritical carbon dioxide up to 403 K and 35 MPa for which data on the chemical shift of the hydroxyl group and methyl group are reported and interpreted.     

Improvements of metabolic imbalances after enteral sodium bicarbonate supplementation in infants of very low birth weight (VLBW)

One of the main points of clinical care is the catch-up growth of VLBW infants especially those of small gestational age (SGA). The required high amounts of protein are often not tolerated [1]. Metabolic imbalances due to immaturities of protein metabolism are described [2, 3] also in infants SGA feeding amounts of proteins comparable to mature newborns [4]. Remarkable signs of overloading by proteins are the elevation of amino acid and the bile acid concentrations in the serum [3, 5, 6]. In some of those cases [7] late metabolic acidosis (LMA) is to be seen. There is evidence in the literature that sodium bicarbonate influences nitrogen [8] and ionic balances [9] in newborn animals without any signs of acidosis, besides its simple buffer function. The aim of this study was to control changes of metabolic imbalances after bicarbonate supplementation before development of acidosis in predisposed infants. Therefore we determined parameters, which were significantly changed with LMA [6] during two feeding schedules: firstly, during bolus supplementation in infants feeding (2.0 +/- 0.4) g/kg BW.d protein and secondly during chronic supplementation of bicarbonate to (3.0 +/- 0.4) g/kg BW.d protein. In relation to the improvement of the nitrogen balance in growing lambs [7] we supposed comparable effect of bicarbonate on metabolic imbalances caused by protein overloading.     

Interhemispheric transfer after spontaneous recovery in 43 cases of severe closed head injury.

Examined the possibility of frequent callosal disconnection following closed head injury. Interhemispheric transfer was evaluated in 43 severe closed-head-injured patients (aged 18–51 yrs) using a wide-ranging battery of untimed behavioral tasks, after the period of spontaneous recovery. Only 1 S showed signs of callosal disconnection. Much effective interhemispheric transfer occurred in closed-head-injured Ss after the period of spontaneous recovery. More frequent occurrence of the disconnection syndrome in its acute phase is a possibility that cannot be excluded. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High-quality photonic sampling streams from a semiconductor diodering laser

We report on the development of an ultralow-noise, external-cavity, actively mode-locked semiconductor diode laser for application in next-generation photonic sampling systems. A summary of harmonically mode-locked noise characteristics in a 65-MHz ring cavity is presented through the range of pulse repetition frequencies between 130 MHz and 8.3 GHz (2nd-128th harmonic). Important implications regarding the use of gain-versus-loss modulation as the active modelocking mechanisms are discussed. We also report what are, to our knowledge, the lowest noise characteristics achieved to date for a semiconductor diode laser operating at 10 GHz. Individually optimized results of 0.12% rms amplitude noise (10 Hz-10 MHz), and 43 fs rms residual phase jitter (10 Hz-10 MHz) provide a theoretical resolution of 8.6 bits in a 10-GSPS optical analog-to-digital converter. We have also achieved dispersion-compensated pulsewidths; as short as 1.2 ps, and shown successful operation of a novel phase-locked-loop capable of reducing the rms; residual phase noise by as much as 91% within its response bandwidth. Finally, the first measurements of residual phase noise out to the Nyquist frequency (5 GHz) are presented, providing an upper bound on the rms residual phase jitter of 121 fs (10 Hz-5 GHz)     

Data to frequency mappings in various MSK schemes

Minimum shift keying (MSK) is a digital modulation scheme which is suited to demanding applications requiring good bandwidth efficiency and error performance. It can be regarded as continuous phase frequency shift keying (CPFSK) with two signalling frequencies. In general, there is no unique mapping from the input data polarity to the particular signalling frequency during a given bit interval. The simplest formulation maps zeros of the data (marks) to the lower frequency, and ones (spaces) to the higher frequency. Other formulations of MSK employ more complex mappings. The article summarises the most commonly encountered mappings, then shows how to convert from one formulation to another by manipulating the input or output data. It is, therefore, possible to establish communication between different MSK modems employing different formulations of MSK by simple processing of the data     

Zum Spannungsrißkorrosionsverhalten rekristallisierter Bleche der AlLi-Legierung 8090-T81

On the stress corrosion cracking behaviour of recrystallized 8090-T81 Sheets The stress corrosion cracking behaviour of a recrystallized sheet of the Al-Li-Cu-Mg-Zr alloy 8090-T81 was studied performing accelerated tests under constant deformation, constant load, and slow strain rate conditions. The used electrolytes were an aqueous 3.5% NaCl solution, an aqueous solution of 2% NaCl + 0.5% Na₂CrO₄ at pH = 3, and synthetic seawater according to ASTM D1141. Alternately immersed in 3.5% NaCl solution according to ASTM G44 the investigated alloy was found to be susceptible to stress corrosion cracking was not promoted by continuous immersion in aerated 3.5% NaCl solution, 3.5% NaCl solution saturated with carbon dioxide, and in acid chromate inhibited 2% NaCl solution. Using the slow strain rate technique with continuously immersed flat tensile specimens stress corrosion cracking was only observed in synthetic seawater. Under specific environmental conditions hydrogen embrittlement can occur in the investigated material.     

Sequence‐Specific Molecular Lithography Towards DNA‐Templated Electronics

Recent advances in the realization of individual molecular‐scale devices [1,2] highlight the integration of individual devices into large‐scale functional circuits as the major challenge. DNA‐programmed assembly is a promising avenue in that direction due to the large amount of information that can be coded into the molecules and the ability to translate that information into physical constructs [3]. Large‐scale DNA‐templated electronics require, however, complex manipulation of double‐stranded DNA (dsDNA) molecules, as well as patterning of the electrical properties instilled to them by, e.g., metallization. To that end, sequence‐specific molecular lithography on single DNA molecules has been developed [4]. This was achieved by harnessing the exquisite homologous recombination process of the RecA protein. Sequence‐specific patterning of the metal coating of DNA molecules, localization of arbitrary labeled molecular objects at any desired dsDNA address without prior modifications, and generation of molecularly accurate stable dsDNA‐dsDNA junctions are demonstrated. The information encoded in the DNA molecules directs the lithographic process in analogy to the masks used in conventional microelectronics. The RecA protein provides the assembling capabilities, as well as the resist function.     

The high-resolution time-of-flight spectrometer TOFTOF

The TOFTOF spectrometer is a multi-disc chopper time-of-flight spectrometer for cold neutrons at the research neutron source Heinz Maier-Leibnitz (FRM II). After five reactor cycles of routine operation the characteristics of the instrument are reported in this article. The spectrometer features an excellent signal to background ratio due to its remote position in the neutron guide hall, an elaborated shielding concept and an s-shaped curved primary neutron guide which acts i.a. as a neutron velocity filter. The spectrometer is fed with neutrons from the undermoderated cold neutron source of the FRM II leading to a total neutron flux of 10¹⁰n/cm²/s in the continuous white beam at the sample position distributed over a continuous and particularly broad wavelength spectrum. A high energy resolution is achieved by the use of high speed chopper discs made of carbon-fiber-reinforced plastic. In the combination of intensity, resolution and signal to background ratio the spectrometer offers new scientific prospects in the fields of inelastic and quasielastic neutron scattering.     

Inactivation of FhuA at the cell surface of Escherichia coli K-12 by a phage T5 lipoprotein at the periplasmic face of the outer membrane

Inactivation of phage T5 by lysed cells after phage multiplication is prevented by a phage-encoded lipoprotein (Llp) that inactivates the FhuA outer membrane receptor protein (K. Decker, V. Krauel, A. Meesmann, and K. Heller, Mol. Microbiol. 12:321-332, 1994). Using FhuA derivatives carrying insertions of 4 and 16 amino acid residues and point mutations, we determined whether FhuA inactivation is caused by binding of Llp to FhuA and which regions of FhuA are important for inactivation by Llp. Cells expressing Llp were resistant not only to phage T5 but to all FhuA ligands tested, such as phage phi 80, colicin M, and albomycin, and they were strongly reduced in the uptake of ferrichrome. Most of the FhuA derivatives which were not affected by Llp were, according to a previously published FhuA transmembrane topology model, located in periplasmic turns and in the TonB box close to the periplasm. Since the ligands bind to the cell surface, interaction of FhuA with Llp in the periplasm may induce a FhuA conformation which impairs binding of the ligands. This conclusion was supported by the increase rather than decrease of colicin M sensitivity of two mutants in the presence of Llp. The only Llp-resistant FhuA derivatives with mutations at the cell surface contained insertions of 16 residues in the loop that determines the permeability of the FhuA channel and serves as the principal binding site for all FhuA ligands. This region may be inactivated by steric hindrance in that a portion of Llp penetrates into the channel. Outer membranes prepared with 0.25% Triton X-100 from cells expressing Llp contained inactivated FhuA, suggesting Llp to be an outer membrane protein whose interaction with FhuA was not abolished by Triton X-100. Llp solubilized in 1.1% octylglucoside prevented T5 inactivation by FhuA dissolved in octylglucoside.