The calculation of the heat release rate by oxygen consumption in a controlled‐atmosphere cone calorimeter

The standard cone calorimeter according to ASTM E 1354 and ISO 5660 enables reaction‐to‐fire tests to be performed in ambient atmospheric conditions. A controlled‐atmosphere chamber modifies the standard apparatus in a way that allows tests to be performed in nonambient conditions as well. The enclosed chamber is placed underneath the standard exhaust hood and does not have a closed connection to the hood. With this open arrangement, the exhaust gases are diluted by excess air drawn in from the laboratory surroundings. Heat‐induced changes in the consequential dilution ratio affect the calculation of fire quantities and, when neglected, lead to deviations of up to 30% in heat release rate. The paper introduces a test protocol and equations to calculate the heat release rate taking dilution effects into account. A mathematical correction is shown that compensates for the dilution effects while avoiding extensive mechanical changes in the equipment. Copyright © 2013 John Wiley & Sons, Ltd.     

New carbon composite adsorbents for the removal of textile dyes from aqueous solutions: Kinetic,equilibrium, and thermodynamic studies

New carbon composite materials were prepared by pyrolysis of mixture of coffee wastes and red mud at 700 °C with the inorganic: organic ratios of 1.9 (CC-1.9) and 2.2 (CC-2.2). These adsorbents were used to remove reactive orange 16 (RO-16) and reactive red 120 (RR-120) textile dyes from aqueous solution. The CC-1.9 and CC-2.2 materials were characterized using Fourier transform infrared spectroscopy, Nitrogen adsorption/desorption curves, scanning electron Microscopy and X-ray diffraction. The kinetic of adsorption data was fitted by general order kinetic model. A three-parameter isotherm model, Liu isotherm model, gave the best fit of the equilibrium data (298 to 323 K). The maximum amounts of dyes removed at 323 K were 144.8 (CC-1.9) and 139.5 mg g^?1 (CC-2.2) for RO-16 dye and 95.76 (CC-1.9) and 93.80 mg g^?1 (CC-2.2) for RR-120 dye. Two simulated dyehouse effluents were used to investigate the application of the adsorbents for effluent treatment.     

A theory-based approach to teaching young children about health: A recipe for understanding.

The theory–theory account of conceptual development posits that children's concepts are integrated into theories. Concept-learning studies have documented the central role that theories play in children's learning of experimenter-defined categories but have yet to extensively examine complex, real-world concepts, such as health. The present study examined whether providing young children with coherent and causally related information in a theory-based lesson would facilitate their learning about the concept of health. This study used a pretest/lesson/posttest design, plus a 5-month follow-up. Children were randomly assigned to 1 of 3 conditions: theory (i.e., 20 children received a theory-based lesson), nontheory (i.e., 20 children received a nontheory-based lesson), and control (i.e., 20 children received no lesson). Overall, the results showed that children in the theory condition had a more accurate conception of health than children in the nontheory and control conditions, suggesting the importance of theories in children's learning of complex, real-world concepts. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Fault detection and identification for a class of continuous piecewise affine systems with unknown subsystems and partitions

This paper establishes a novel online fault detection and identification strategy for a class of continuous piecewise affine (PWA) systems, namely, bimodal and trimodal PWA systems. The main contributions with respect to the state‐of‐the‐art are the recursive nature of the proposed scheme and the consideration of parametric uncertainties in both partitions and in subsystems parameters. In order to handle this situation, we recast the continuous PWA into its max‐form representation and we exploit the recursive Newton‐Gauss algorithm on a suitable cost function to derive the adaptive laws to estimate online the unknown subsystem parameters, the partitions, and the loss in control authority for the PWA model. The effectiveness of the proposed methodology is verified via simulations applied to the benchmark example of a wheeled mobile robot.     

A GC-EI-MS/MS Method for the Determination of 15 Polybrominated Diphenyl Ethers (PBDEs) in Fish and Shellfish Tissues

This paper describes the development and validation of an analytical method to determine 15 polybrominated diphenyl ethers (PBDEs) in fish and shellfish tissues with gas chromatography coupled to triple quadrupole mass spectrometry using electron impact source (GC-EI-MS/MS). A QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe)-like procedure was applied; the extract was cleaned up on an acidic Extrelut-NT3 column connected on top of a silica cartridge and further purified with gel permeation chromatography (GPC). The SIM acquisition proved to yield better results than traditional MRM approach for octa-, nona-, and deca-brominated congeners. The validation study was carried out in inter-laboratory conditions. The average recoveries were in the range 66–118%, with relative standard deviations generally lower than or equal to 22%. Quality assurance and quality control practices were thoroughly described and highlighted. These long and tedious practices are fundamental to obtain reliable quantitative data during food monitoring programs and, therefore, to support daily intake assessments. Finally, the procedure was applied to the analysis of marine fish samples collected in local markets. Mackerel and mullet were the most contaminated species.     

Morphology study of progesterone polymorphs prepared by polymer‐induced heteronucleation (PIHn)

In this article, morphology of progesterone polymorphs prepared by polymer‐induced heteronucleation (PIHn) technique was studied. Hydroxypropyl methylcellulose(HPMC), such as dextran T‐500 and gelatin G‐9382, polyisoprene (PI), and acrylonitrile/butadiene copolymer (NBR) were used as substrates. The crystallizations were performed by solvent evaporation at room temperature from 0.5, 10, and 40 mg/ml solutions in chloroform and acetone. Progesterone polymorphs were identified by X‐ray diffraction. Differential scanning calorimetry and total attenuated reflectance infrared spectroscopy were used as complementary techniques in the identification. Depending on the polymeric matrix and the concentration used, form 1, form 2, or mixture of both polymorphs were obtained. Scanning electron microscopy pictures evidenced difference in morphology and in homogeneity of the two progesterone polymorphs. These polymorphs prepared by PIHn, did not present a distinctive morphology that allows identifying polymorph by its crystal habit. Hence, polymeric matrix induced the crystallization, affecting polymorphism and morphology. SCANNING 35:213‐221, 2013. © 2012 Wiley Periodicals, Inc.     

Mapping the development of Open Access in Latin America and Caribbean countries. An analysis of Web of Science Core Collection and SciELO Citation Index (2005–2017)

Scientometrics - Open Access (OA) initiatives and knowledge infrastructure represent vital elements for both producing significant changes in scholarly communication and reducing limitations of...     

Optimal packing of material flow on conveyor belts

We are interested in an optimal packing density problem for material flows on conveyor belts in two spatial dimensions. The control problem is concerned with the initial configuration of parts on the belt to ensure a high overall flow rate and to further reduce congestion. An adjoint approach is used to compare the optimization results from the microscopic model based on a system of ordinary differential equations with the corresponding macroscopic model relying on a hyperbolic conservation law. Computational results highlight similarities and differences of both optimization models and emphasize the benefits of the macroscopic approach.     

Rawseeds ground truth collection systems for indoor self-localization and mapping

A trustable and accurate ground truth is a key requirement for benchmarking self-localization and mapping algorithms; on the other hand, collection of ground truth is a complex and daunting task, and its validation is a challenging issue. In this paper we propose two techniques for indoor ground truth collection, developed in the framework of the European project Rawseeds, which are mutually independent and also independent on the sensors onboard the robot. These techniques are based, respectively, on a network of fixed cameras, and on a network of fixed laser scanners. We show how these systems are implemented and deployed, and, most importantly, we evaluate their performance; moreover, we investigate the possible fusion of their outputs.