Identifying the time of step change in binary profiles

Control charts are intended to aid quality practitioners in monitoring whether a change has occurred in a process. When a control chart indicates an out-of-control signal, it means that the process has changed. However, control chart signals do not indicate the real time of process changes; so estimators are applied to indicate the time when a change in the process takes place, which is referred to as the change point. This paper provides a maximum likelihood estimator to identify the real time of a step change in phase II monitoring of binary profiles, in which the quality of a process is characterized by a logistic regression between the response and predictor variables. Simulation studies are provided to evaluate the effectiveness of the change point estimator.     

Properties of PET/clay nanocomposite films

Polyethylene terephthalate (PET) nanocomposite films were prepared by cast extrusion followed by uniaxial stretching, using chill rolls. Transmission electron microscopy (TEM) and wide angle X‐ray diffraction (WAXD) showed that the clay layers were aligned in the machine direction (MD) in the PET/clay nanocomposite (PCN) films. Differential scanning calorimetry (DSC) showed that PCN films have higher crystallinity than the neat PET films, possibly due to the nucleating role of the silicate layers. The PCN films became hazier as the clay content increased, but the film transparency remained in the acceptable range. Oxygen permeability of the PCN films decreased by 23% compared to the neat PET film. This is comparable with predictions of models proposed in the literature. Silicate incorporation brought about 20% increase in the tensile modulus, while the puncture and tear propagation resistance were reduced, due to brittleness of the PCN films. The measured modulus (1.7 GPa) was somewhat smaller than the values predicted using the Pseudoinclusion model (2.1 GPa). POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Synthesis of water dispersible reduced graphene oxide via supramolecular complexation with modified β-cyclodextrin

A noncovalent functionalization of the edges of reduced graphene oxide (RGO) with β-cyclodextrin-graft-hyperbranched polyglycerol (β-CD-g-HPG) was successfully performed via a host-guest interaction. The results showed that β-CD-g-HPG disperses the graphene sheets better than pure β-CD or HPG. The resulted supramolecular structure is stable in neutral water medium more than one week. However, in acidic medium the host-guest interaction is collapsed and graphene nanosheets precipitate.     

A modern congestion pricing policy for urban traffic: subsidy plus toll

Railway Engineering Science - Congestion pricing is seen as an effective policy to address traffic congestion. In such policies where money, people and authorities are involved, the success...     

Numerical simulation and optimization of steam-assisted gravity drainage with temperature,rate, and well distance control using an efficient hybrid optimization technique

Steam-assisted gravity drainage (SAGD) is a thermal enhanced oil recovery technique through drilling of two horizontal wells. Effects of steam injection temperature, well rates, and their distance on oil recovery were analyzed and optimized. Steam temperature and well distances remarkably affect SAGD performance. Four metaheuristic algorithms (particle swarm optimization (PSO), imperialist competitive algorithm, cultural algorithm, and Bees algorithm) and pattern search optimization algorithm (PSA) are used for optimization. PSO performs better than other metaheuristics and PSA is the fastest one, while it is probable to be trapped in local optimums. Hybrid PSO-PS is proposed that starts with PSO and proceeds with PSA, and tested in an SAGD project and showed excellence over other techniques.     

Wear and Failure Analysis of Semi-Autogenous Grinding Mill Liners

Journal of Failure Analysis and Prevention - The wear and failure analysis of shell liners of a grinding mill is investigated. Metallurgical and tribological studies were conducted on the worn...     

Sonochemical Synthesis of a Nanocrystalline Tin(IV) Complex based on a Bulky Anthracene Carboxylate Ligand: Spectroscopic and Photophysical Properties

In order systematically investigate the effect of ligand with a large conjugated π-system on the structure and optical properties of tin complex, anthracene-9-carboxylic acid (L¹) is selected as a primary ligand, and quinoline-2-carboxylic acid (L²) used as second ligand to incorporate with anthracene-9-carboxylic acid to construct a new tin(IV)-carboxylate coordination complex under thermal gradient condition. Prepared complex was fully characterized based on its ¹H and ¹³C NMR, IR and UV spectra and elemental analysis. The molecular structure of complex was determined by single-crystal X-ray analysis. The nanocrystalline complexes of the prepared complex were successfully obtained at 30, 50 and 60 °C by a facile sonochemical route. The new nanocrystalline complexes were characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analysis. The photoluminescence properties of the nanocrystalline complexes and crystalline bulk complex in the solid-state indicated that the size of the complex particles has a remarkable effect on the optical properties of it. Absorption and emission peaks of the nanocrystalline complexes blue shifted significantly in comparison with those of in the single-crystal form. Application of the prepared complex in fabrication of an organic light-emitting diode has been demonstrated. The current–voltage (I–V) characteristics and the electroluminescence (EL) properties of the complex have been investigated. The EL of the compound exhibits green emission at 552 nm.     

Mass Transfer in Molybdenum Extraction from Aqueous Solutions Using Nanoporous Membranes

Modeling of non‐disperse solvent extraction of molybdenum(VI) with PC‐88A as extractant and a nanoporous hollow‐fiber membrane contactor as extractor was performed. Computational fluid dynamics was applied for modeling and simulation of molybdenum extraction. Concentration, pressure, and velocity distributions for molybdenum were determined. The extraction of Mo⁶⁺ was greatly influenced by the flow rate of feed solution. The extraction efficiency was reduced with higher feed flow rate and increased with the molybdenum content in the feed. The pressure drop along the shell side of the membrane extractor was found to be not significant, being one of the advantages of membrane extractors which assist in reducing the operational costs. The proposed simulation method is capable to prognosticate the performance of solvent extraction of molybdenum in membrane extractors.