All‐hexahedral element meshing: automatic elimination of self‐intersecting dual lines

There has been some degree of success in all‐hexahedral meshing. Standard methods start with the object geometry defined by means of an all‐quadrilateral mesh, followed by the use of the combinatorial dual to the mesh in order to define the internal connectivities among elements. For all of the known methods using the dual concept, it is necessary to first prevent or eliminate self‐intersecting (SI) dual lines of the given quadrilateral mesh. The relevant features of SI lines are studied, giving a method to remove them, which avoids deforming the original geometry. Some examples of resulting meshes are shown where the current meshing method has been successfully applied. Copyright © 2002 John Wiley & Sons, Ltd.     

Nuclear transfer and cloning

Ultraviolet-induced erythema is now recognized as an important clinical marker for skin cancer risk. People with a history of repeated erythematous exposures to sunlight are more likely to develop both melanoma and nonmelanoma skin cancers. Is erythema the most important thing we need to be concerned about in terms of protecting the public from the harmful effects of sunlight? What do we know about UV-induced erythema, and why is it a powerful influence on skin cancer risk?     

A comparison of the shake test, optical density, L/S ratio (planimetric and stechiometric) and PG for the assessment of fetal lung maturity

Our aim was to determine the diagnostic accuracy and reliability of four tests for the assessment of fetal lung maturity (FLM): shake test, optical density at 650 nm (OD650), lecithin to sphingomyelin ratio (L/S) by planimetry and stechiometry, and presence of phosphatydylglycerol. Amniotic fluid was obtained from 74 patients at various gestational ages. The shake test and the OD650 were performed according to published methods L/S was determined by TLC (thin-layer chromatography) and the ratio assessed by planimetry and stechiometrically by measurement of organic phosphorus from the chromatographic spots. PG was assessed similarly by TLC. When correlated with gestational age at amniocentesis, all tests correlated positively: shake test (r = 0.46, p < 0.005); OD650 (r = 0.31, p < 0.005); planimetric L/S (r = 0.77, p < 0.005); stechiometric L/S (r = 0.52, p < 0.005) and PG (r = 0.54, p < 0.005). The diagnostic accuracy of each test was as follows: the shake test and the OD650 had a sensitivity of 50%, while the steciometric L/S had a sensitivity of 75%, the planimetric L/S and the presence of PG were 100%. All four tests demonstrated a specificity greater than 64%, the highest for the PG presence being (83%) and the shake test (86%). Predictive negative values for lung maturity were > 93% for all tests, with the highest for the planimetric L/S and presence of PG being (100%). The study confirms that the determination of L/S ratio is still superior to other tests in terms of overall diagnostic accuracy. In addition, it was found that presence of PG was highly associated with the absence of respiratory complications in the newborn.     

Approximate feedback linearization of discrete-time non-linear systems using virtual input direct design

The design of feedback-linearization and poles-placement controllers for discrete-time non-linear plants, using Input/Output/State measurements only, is typically addressed via indirect design. In this paper we propose the use of a new technique, based on a Virtual Input Direct Design (VID²) approach. The main feature of such a technique is to reduce the control design problem into a standard non-linear mapping approximation problem, without calling for the preliminary construction of an appropriate model of the plant. As compared with the existing methods, the new one requires less computational effort, while taking full advantage of the non-linear approximation software tools already available. In this paper, the new method is described, a simple theoretical analysis is given, and some numerical examples are presented.     

Computing the energy balance of a statue of bronze: The San Marco's horses as a case study

The energy balance is discussed for the complex case of bronze or marble statuary horses and particularly the four horses of San Marco in Venice. Having computed the coefficient of exchange between bronze and the atmosphere, the daytime overheating is evaluated for different seasons and orientations of the statues. The equations can be solved with reasonable approximation and both the past and future overheatings can be evaluated as a function of the growing surface weathering and blackening. Therefore, the present analysis points out the chief characteristics of both the diurnal cycle and the variation over the centuries of the response of the bronzes to atmospheric variables.     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

SFG and DFG investigation of Au(111), Au(210), polycrystalline Au,Au–Cu and Au–Ag–Cu electrodes in contact with aqueous solutions containing KCN and 4-cyanopyridine

We report on potential-dependent in situ SFG and DFG spectroscopy carried out at Au(111), Au(210), polycrystalline Au, Au–Cu and Au–Ag–Cu electrodes in contact with aqueous solutions containing CN⁻ and 4-cyanopyridine (4CP). Spectroelectrochemical work was complemented by cyclic voltammetry. The chief stress has been placed on systematising and quantifying the interaction between 4CP and CN⁻ and the attending effects on the vibrational and electronic structures of the interface. The voltammetric behaviour of the investigated electrodes, modified by the addition of 4CP to the CN⁻ electrolyte, denote changes in the CN⁻ adsorption characteristics and effects of the adsorbed CN⁻ layer on the electrodic reactivity of 4CP. The differences among the investigated electrodes can be explained in terms of their respective degrees of atomic packing or with alloying effects on the stability of adsorbed CN⁻. The potential-dependent spectra have been analysed quantitatively with a model for the second order non linear susceptibility accounting for vibrational and electronic effects. The spectral changes induced by addition of 4CP denote interaction of the aromatic with the electrode through the CN⁻ monolayer. The non-resonant contribution yields information on the effects of 4CP on the fine structure of the bound electron density of states.