High‐strength biodegradable poly(vinyl alcohol)/fly ash composite films

We prepared biodegradable composite films of poly(vinyl alcohol) (PVA) and fly ash (FA) spanning 5, 10, 15, 20, and 25 wt % concentrations by casting aqueous solutions. The tensile strengths of the composite films were increased proportionally via the addition of FA. The strength of the film was enhanced by 193% with 20% FA compared to the neat PVA control. Further addition of FA deviated from the linear trend. The moduli of the composites also increased proportionally with FA addition to 212% at 20 wt % FA addition compared to the control. The percentage strain at break exponentially decreased with the addition of FA. In the dynamic mechanical behavior, the storage and loss moduli both increased with FA content. The tan δ peaks corresponding to the glass‐transition temperature shifted 5–10°C higher above the control sample (73°C). This shift was attributed to a reduction in the mobility of PVA segments because they were anchored by the FA surface. The reductions in mobility manifested in strong interfacial interactions were indicative of hydrogen bonding. Broadening and reduction in the intensities of the stretching and bending peaks of ? OH, ? CH and ? C?O of PVA in the Fourier transform infrared spectra were observed. This suggested that hydrogen bonding was active between the functional groups in the FA and PVA chains. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Indole‐based polymer and its silver nanocomposite as advanced antibacterial agents: synthetic path,kinetics of polymerization and applications

Atom transfer radical polymerization of 1‐allylindole‐3‐carbaldehyde (AIC) was studied by employing 2‐bromoisobutyryl bromide as initiator in toluene. It led to controlled radical polymerization of AIC, with an increase of molecular weight along with the conversion of the monomer, and a relatively narrow molar mass distribution was obtained, as determined by gel permeation chromatography. The living nature of poly(1‐allylindole‐3‐carbaldehyde) (PAIC) was confirmed by the chain extension polymerization whereas ¹H NMR analysis showed that the major population of PAIC retained the chain‐end functional group. PAIC and its silver nanocomposite were found to be biologically active against some tested bacterial pathogens. Minimum inhibitory concentration tests revealed that PAIC exhibited antibacterial activity against Staphylococcus aureus, Proteus mirabilis and Klebsiella pneumonae whereas PAIC/Ag nanocomposite showed antibacterial activity against Enterococcus faecalis and K. pneumonae. © 2012 Society of Chemical Industry     

Robust observer based control for plasma glucose regulation in type 1 diabetes patient using attractive ellipsoid method

This paper deals with the design of robust observer based output feedback control law for the stabilisation of an uncertain nonlinear system and subsequently apply the developed method for the regulation of plasma glucose concentration in Type 1 diabetes (T1D) patients. The principal objective behind the proposed design is to deal with the issues of intra‐patient parametric variation and non‐availability of all state variables for measurement. The proposed control technique for the T1D patient model is based on the attractive ellipsoid method (AEM). The observer and controller conditions are obtained in terms of linear matrix inequality (LMI), thus allowing to compute easily both the observer and controller gains. The closed‐loop response obtained using the designed controller avoids adverse situations of hypoglycemia and post‐prandial hyperglycemia under uncertain conditions. Further to validate the robustness of the design, closed‐loop simulations of random 200 virtual T1D patients considering parameters within the considered ranges are presented. The results indicate that hypoglycemia and post‐prandial hyperglycemia are significantly reduced in the presence of bounded (±30% ) parametric variability and uncertain exogenous meal disturbance.Inspec keywords: medical control systems, observers, uncertain systems, nonlinear control systems, robust control, control system synthesis, linear matrix inequalities, feedback, sugar, closed loop systems, diseasesOther keywords: virtual T1D patients, type 1 diabetes patients, closed‐loop simulations, uncertain conditions, post‐prandial hyperglycemia, designed controller, closed‐loop response, controller gains, linear matrix inequality, controller conditions, T1D patient model, control technique, intra‐patient parametric variation, principal objective, plasma glucose concentration, uncertain nonlinear system, robust observer based output feedback control law, attractive ellipsoid method, plasma glucose regulation     

Dynamic process modelling of iron ore sintering

A mathematical model was developed for the iron ore sintering process considering all the major thermochemical phenomena in the system, assuming both the static and moving bed configurations. The model predicted a large number of parameters pertinent to the sintering process including the temperatures of the gas and solid, concentration of various species, amount of solid melted etc. The results were tested against the data existing in literature, and a limited number of pot tests conducted in a pilot plant. Despite high complexity of the problem, the agreement between the experimental and simulated data was reasonably good.     

Numerical method of reliability evaluation of a stand-by redundant system

This paper presents the probabilistic model of redundant system with common cause failure (ccf), logic failure and human error. The various states of the system are represented by Markov-model. As the number of states grows in size, it is tedious to solve the system state equations by Laplace inverse transform. This paper presents a new approach using standard numerical methods to solve such problems. The numerical results obtained in Ref. [1] B. S. Dhillon and S. N. Rayapati, Common cause failure and human error modelling of redundant systems with partially energized standby units, Reliab. Engng.19, 1–14 (1987) for redundant system with common cause failure and human error compare well with the results obtained with this new approach.     

Alkylation of phenol with tert‐butyl alcohol over a catalyst synthesized from coal fly ash

The alkylation of phenol with tert‐butyl alcohol was carried out in a continuous flow reactor over a catalyst synthesized from fly ash. The activity of the synthesized catalyst was compared with those of other conventional zeolite catalysts such as 13X (NaX) and Hβ. Of all the catalysts tested, zeolite Hβ showed the highest activity in phenol conversion followed by the synthesized zeolite (HZOP‐31). The activity of commercial 13X zeolite was found to be same as that of HZOP‐31. Ce‐exchanged catalyst (CeZOP‐31) showed even better performance than 13X in the alkylation of phenol. The effects of different parameters such as reactant mole ratio, temperature and space velocity on phenol conversion and tert‐butyl phenol selectivity were studied. The effect of mass transfer resistance was found to be negligible within the feed rate range and particle size range studied. The apparent activation energy for the reaction of tert‐butyl alcohol over HZOP‐31 was determined as 30.1 kJ mol^?1. Copyright © 2006 Society of Chemical Industry     

Design and development of long-period grating sensors for temperature monitoring

Long Period Gratings (LPGs) have been developed using carbon dioxide laser in a standard optical fibre. LPGs with a periodicity of 600 μm and grating length of 24 mm have been inscribed on standard single mode fibre. Such gratings have been used in designing temperature sensors and temperature is monitored up to 80°C. The sensitivity of such type of sensor is 0·06 nm/°C where as for standard Fibre Bragg Grating (FBG) it is 0·011 nm/°C. The LPG performance is also evaluated after γ-ray irradiation for total dose of 5 KGy and has not shown any effect on transmission spectrum.     

A framework to identify applications of information technology to improve service quality

More and more organizations are seeking innovative ways to use information technology (IT) for strategic advantage. One way to gain this competitive edge is by differentiating the services provided to customers. This paper provides a framework to identify areas ripe for the implementation of IT to enhance and improve customer service. The framework is based upon the examination of the existing service delivery system of an organization and how applications of IT might change the interfaces among the various players (customers, employees, etc.) in the service delivery system. Further, examples are presented to illustrate how some organizations have achieved superior service quality by creatively utilizing simple IT tools.