Fabrication of Cu/graphite film/Cu sandwich composites with ultrahigh thermal conductivity for thermal management applications

Effective thermal management of electronic integrated devices with high powder density has become a serious issue, which requires materials with high thermal conductivity (TC). In order to solve the problem of weak bonding between graphite and Cu, a novel Cu/graphite film/Cu sandwich composite (Cu/GF/Cu composite) with ultrahigh TC was fabricated by electro-deposition. The micro-riveting structure was introduced to enhance the bonding strength between graphite film and deposited Cu layers by preparing a rectangular array of micro-holes on the graphite film before electro-deposition. TC and mechanical properties of the composites with different graphite volume fractions and current densities were investigated. The results showed that the TC enhancement generated by the micro-riveting structure for Cu/GF/Cu composites at low graphite content was more effective than that at high graphite content, and the strong texture orientation of deposited Cu resulted in high TC. Under the optimizing preparing condition, the highest in-plane TC reached 824.3 W·m⁻¹·K⁻¹, while the ultimate tensile strength of this composite was about four times higher than that of the graphite film.     

Analysis of a two-dimensional symmetric problem on extension of an Al-polyimide-Cu layered structure with a model crack

To increase the efficiency of designing systems intended for monitoring surface cracks in aluminum structures during their working life, we have analyzed a two-dimensional symmetric problem on uniaxial extension of an Al-polyimide-Cu layered structure with ideal adhesion between layers and a model crack in the aluminum base. The problem has been first solved for a sample with the crack modeled by a zero-thickness notch using the ANSYS engineering simulation program package. It is shown that this setting of the problem can lead to inadequate results as manifested, in particular, by significantly overstated mechanical stresses in aluminum in the region of crack emergence on the surface. In order to eliminate this difficulty, we propose to use the structure with a model defect in the form of a notch of nonzero thickness in the initial unstressed state of the structure. Recommendations for selecting the thickness of a notch used in the model structure are given.

     

Accounting for the uncertainties in the estimation of average shear wave velocity using V S– N correlations

Site-specific seismic hazard analysis is crucial for designing earthquake resistance structures, particularly in seismically active regions. Shear wave velocity ( V _S) is a key parameter in such analysis, although the economy and other factors restrict its direct field measurement in many cases. Various V _S–SPT– N correlations are routinely incorporated in seismic hazard analysis to estimate the value of V _S. However, many uncertainties question the reliability of these estimated V _S values. This paper comes up with a statistical approach to take care of such uncertainties involved in V _S calculations. The measured SPT– N values from all the critical boreholes were converted into statistical parameters and passed through various correlations to estimate V _S at different depths. The effect of different soil layers in the boreholes on the Vs estimation was also taken into account. Further, the average shear wave velocity of the top 30 m soil cover ( V _S30) is estimated after accounting for various epistemic and aleatoric uncertainties. The scattering nature of the V _S values estimated using different V _S– N correlations was reduced significantly with the application of the methodology. Study results further clearly demonstrated the potential of the approach to eliminate various uncertainties involved in the estimation of V _S30 using general and soil-specific correlations.     

Synthesis and physicochemical characteristics of polymolybdenum(VI) phenylsiloxanes by means of different methods

Interaction of molybdenyl(VI) bis(acetylacetonate) with polyphenylsiloxane in xylene and under mechanochemical activation conditions has been investigated. The interaction in solution proceeds with splitting of the siloxane bond and formation of polymolybdenum(VI) phenylsiloxane with different silicon/metal ratios. The fractions with the silicon/metal ratio < 2 are characterized with high degree of crystallinity and low solubility, whereas those with the ratio > 2 are amorphous. The interaction of the above reagents under mechanical activation conditions proceeds with the formation of soluble polymers similar to those obtained in a solution with the silicon/molybdenum ratio equal to 2.6. The crystal chemistry parameters of the fraction obtained in solution with the ratio Si/Mo equals to 1:2 have been calculated on the basis of the X-ray diffraction analysis data using the Debye–Shearer equation. It has been demonstrated that the chain cross section found using the Miller–Boyer method coincides with that calculated geometrically on the basis of literature data on bond lengths and angles. It is shown that the interaction of molybdenyl(VI) bis(acetylacetonate) with polyphenylsiloxane takes place in solution more deeply than under the conditions of mechanochemical activation and is accompanied by the process of separation siloxanes connection. This leads to the formation of a fraction with smaller ratio of substances than the initial ratio.