Immobilization of glucose oxidase on nonwoven fabrics with bombyx mori silk fibroin gel

The enzyme glucose oxidase (GOD) was immobilized on the nonwoven fabrics, which have excellent properties in diffusivity of substrates, mechanical strength, and handling, with Bombyx mori silk fibroin gel. The nonwoven fabrics of silk fibroin, viscose rayon, poly-ethyleneterephthalate, 6-nylon, and polypropylene with activated surface by fluoline treatment were used. The stabilities of GOD to heat or pH changes were much improved by the immobilization as well as the case of the GOD immobilized in the silk fibroin membrane. Among nonwoven fabrics, silk fibroin was the most excellent support material for the immobilization of GOD although all nonwoven fabrics used here are able to be used as the support materials. The increase of the sensitivity was observed when the glucose sensor was made with the GOD immobilized on nonwoven silk fabrics as four times compared with the case of the GOD immobilized in the silk fibroin membrane.     

Corrosion of silicon nitride ceramics under hydrothermal conditions

Corrosion behaviour of Si₃N₄ ceramics containing Y₂O₃, Al₂O₃ and AIN as sintering aids was investigated under hydrothermal conditions at 200–300 C and saturated vapour pressures of water for 1–10 days. Hydrothermal corrosion resulted in the dissolution of the Si₃N₄ matrix and the formation of a product layer consisting of the original grain-boundary phases and hydrated silica. The dissolution rate of Si₃N₄ ceramics decreased with decreasing crystallinity of the grain-boundary phase. The dissolution rate could be adequately described by a parabolic plot in the initial stage of the reaction. The apparent activation energies were 83.5–108 kJ mol^–1, and the bending strength of the corroded samples decreased from 600 to 400 MPa in the initial stage of the reaction upto a weight loss of 0.004 g cm^–2, and then was almost constant up to a weight loss of 0.012 g cm^–2.     

Analytical study on cantilever resonance type magnet-integrated sensor device for micro-magnetic field detection

A beam-shaped cantilever resonance type magnetic sensor device has been proposed with a micro magnet. Two structural designs, named as design 1 and design 2, have been comparatively analyzed using ANSYS in order to obtain larger frequency shifts (higher magnetism sensitivity) due to the applied exterior magnetic field. The analytical results show that, in the range of 0–10 mT, the frequency shifts are small, while under 100 mT, a relatively larger frequency shift of about 30 Hz can be theoretically obtained. The power consumption of the proposed devices has been further theoretically studied for preliminary understanding. Using the well-known displacement equations, the estimated power consumption is around 0.21 μW, which is very lower than that of the reported magnetic field sensors. This implies that it is possible to fabricate higher sensitive magnetic field sensor with lower power consumption.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Hierarchical learning from human preferences and curiosity

Applied Intelligence - Recent success in scaling deep reinforcement algorithms (DRL) to complex problems has been driven by well-designed extrinsic rewards, which limits their applicability to many...     

Ultra light-weight and high-resolution X-ray mirrors using DRIE and X-ray LIGA techniques for space X-ray telescopes

We are developing novel ultra light-weight and high-resolution X-ray micro pore optics for space X-ray telescopes. In our method, curvilinear micro pore structures are firstly fabricated by silicon deep reactive ion etching (DRIE) or X-ray LIGA processes. Secondly, side walls of the micro structures are smoothed by magnetic field assisted finishing and/or hydrogen annealing techniques for high reflectivity mirrors. Thirdly, to focus parallel X-ray lights from astronomical objects, these structures are elastically or plastically bent into a spherical shape. Fourthly, the bent structures are stacked to form a multi-stage X-ray telescope. In this paper, we report on fabrication and X-ray reflection tests of silicon and nickel X-ray mirrors using the DRIE and LIGA processes, respectively. For the first time, X-ray reflections were confirmed on both of the mirrors. Estimated rms roughnesses were 5 nm and 3 nm for the silicon and nickel mirrors, respectively.     

A new water-resistant snow index for the detection and mapping of snow cover on a global scale

An up-to-date spatio-temporal change analysis of global snow cover is essential for better understanding of climate–hydrological interactions. The normalized difference snow index (NDSI) is a widely used algorithm for the detection and estimation of snow cover. However, NDSI cannot discriminate between snow cover and water bodies without use of an external water mask. A stand-alone methodology for robust detection and mapping of global snow cover is presented by avoiding external dependency on the water mask. A new spectral index called water-resistant snow index (WSI) with the capability of exhibiting significant contrast between snow cover and other cover types, including water bodies, was developed. WSI uses the normalized difference between the value and hue obtained by transforming red, green, and blue, (RGB) colour composite images comprising red, green, and near-infrared bands into a hue, saturation, and value (HSV) colour model. The superiority of WSI over NDSI is confirmed by case studies conducted in major snow regions globally. Snow cover was mapped by considering monthly variation in snow cover and availability of satellite data at the global scale. A snow cover map for the year 2013 was produced at the global scale by applying the random walker algorithm in the WSI image supported by the reference data collected from permanent snow-covered and non-snow-covered areas. The resultant snow-cover map was compared to snow cover estimated by existing maps: MODIS Land Cover Type Product (MCD12Q1 v5.1, 2012), Global Land Cover by National Mapping Organizations (GLCNMO v2.0, 2008), and European Space Agency’s GlobCover 2009. A significant variation in snow cover as estimated by different maps was noted, and was was attributed to methodological differences rather than annual variation in snow cover. The resultant map was also validated with reference data, with 89.46% overall accuracy obtained. The WSI proposed in the research is expected to be suitable for seasonal and annual change analysis of global snow cover.     

Performance of SOR methods on modern vector and scalar processors

The building-cube method (BCM) is a new generation algorithm for CFD simulations. The basic idea of BCM is to simplify the algorithm in all stages of flow computation to achieve large-scale simulations. Calculation of a pressure field using the Successive Over Relaxation (SOR) method consumes most of the total execution time required for BCM. In this paper, effective implementations on modern vector and scalar processors are investigated. NEC SX-9 and Intel Nehalem-EX are the latest vector and scalar processors. Those processors have much higher peak performances than their previous-generation processors. However, their memory bandwidth improvement cannot catch up with the performance improvement of processors. This is the so-called memory wall problem. In our paper, we discuss optimization techniques for implementation of the SOR method based on architectural characteristics of these modern processors, and evaluate their effects on the sustained performances of these processors for BCM.     

Straight-through microchannel devices for generating monodisperse emulsion droplets several microns in size

The authors recently proposed a promising technique for producing monodisperse emulsions using a straight-through microchannel (MC) device composed of an array of microfabricated oblong holes. This research developed new straight-through MC devices with tens of thousands of oblong channels of several microns in size on a silicon-on-insulator plate, and investigated the emulsification characteristics using the microfabricated straight-through MC devices. Monodisperse oil-in-water (O/W) and W/O emulsions with average droplet diameters of 4.4–9.8 μm and coefficients of variation of less than 6% were stably produced using surface-treated straight-through MC devices that included uniformly sized oblong channels with equivalent diameters of 1.7–5.4 μm. The droplet size of the resultant emulsions depended greatly on the size of the preceding oblong channels. The emulsification process using the straight-through MC devices developed in this research had very high apparent energy efficiencies of 47–60%, defined as (actual energy input applied to droplet generation/theoretical minimum energy input necessary for making droplets) × 100. Straight-through MC devices with numerous oblong microfluidic channels also have great potential for increasing the productivity of monodisperse fine emulsions.     

ESR and Mössbauer studies of the precipitation process of various ferrites from silicate glasses

ESR and Mössbauer studies of the precipitation process of various ferrites from silicate glasses were made to characterize the precipitation mechanism. The changes in linewidth (H _1/2) and effectiveg-value (g _eff) in the ESR spectra of the precipitation process are well explained in terms of super-exchange interaction between magnetic ions and interparticle dipolar interaction between precipitated ferrites. The precipitation tendency of spinel type ferrites from silicate glasses was found to be in the following order: NiFe₂O₄CoFe₂O₄>Fe₃O₄ZnFe₂O₄, MnFe₂O₄. The above order coincided with the order of octahedral site preference energies of divalent transition metal ions.