Alginate-Coated Alginate-Polyethyleneimine Beads for Prolonged Release of Furosemide in Simulated Intestinal Fluid

Furosemide-loaded calcium alginate (ALG), calcium alginate-polyethyleneimine (ALG-PEI) and alginate-coated ALG-PEI (ALG-PEI-ALG) beads were prepared by ionotropic/polyelectrolyte complexation method to achieve controlled release of the drug. Effects of several formulation factors on the characteristics of the beads were investigated. Although variation in formulation factors did not influence the drug-loading efficiency (DLE) of ALG beads, rapid release of the drug in simulated intestinal fluid (SIF) could not be prevented. PEI treatment of ALG beads, however, prolonged the drug release considerably. Ionic interaction, as appeared from FTIR studies, between alginate and PEI led to the formation of polyelectrolyte complex membrane, the thickness of which was dependent on the conditions of PEI treatment as demonstrated by scanning electron microscopy (SEM). The membrane acted as a physical barrier to drug release from ALG-PEI beads. Alginate coating of ALG-PEI beads further prolonged the release of the drug by increasing membrane thickness and reducing swelling of the beads possibly by blocking the surface pores. Differential scanning calorimetry (DSC) study indicated that drug was not degraded by PEI treatment. The release data from ALG-PEI beads showed a good fit in power law expression, whereas the release data from ALG-PEI-ALG beads were found to fit in modified power law expression, and the mechanism of drug release changed from super case II transport to nearly Fickian transport, depending on the degree of gelation and formation of polyelectrolyte complex membrane.     

Exact solution for a nonstatic cylindrically symmetric perfect fluid distribution in Einstein–Cartan theory

We consider a nonstatic, spin-polarized cylindrically symmetric perfect fluid distribution in the Einstein-Cartan theory and obtain the field equations. These field equations are solved using the Ray–Smalley energy-momentum tensor.     

Genetic algorithm based multi-objective reliability optimization in interval environment

In most of the real world design or decision making problems involving reliability optimization, there are simultaneous optimization of multiple objectives such as the maximization of system reliability and the minimization of system cost, weight and volume. In this paper, our goal is to solve the constrained multi-objective reliability optimization problem of a system with interval valued reliability of each component by maximizing the system reliability and minimizing the system cost under several constraints. For this purpose, four different multi-objective optimization problems have been formulated with the help of interval mathematics and our newly proposed order relations of interval valued numbers. Then these optimization problems have been solved by advanced genetic algorithm and the concept of Pareto optimality. Finally, to illustrate and also to compare the results, a numerical example has been solved.     

Unification of Blockchain and Internet of Things (BIoT): requirements,working model,challenges and future directions

Wireless Networks - The Internet of Things (IoTs) enables coupling of digital and physical objects using worthy communication technologies and introduces a future vision where computing systems,...     

Enhancement of properties of recycled coarse aggregate concrete using bacteria

Due to rapid construction, necessity for raw materials of concrete, especially coarse aggregate, tends to increase the danger of early exhaustion of the natural resources. An alternative source of raw materials would perhaps delay the advent of this early exhaustion. Recycled coarse aggregate (RCA) plays a great role as an alternative raw material that can replace the natural coarse aggregate (NCA) for concrete. Previous studies show that the properties of RCA concrete are inferior in quality compared to NCA concrete. This article attempts to study the improvement of properties of RCA concrete with the addition of bacteria named as Bacillus subtilis. The experimental investigation was carried out to evaluate the improvement of the compressive strength, capillary water absorption, and drying shrinkage of RCA concrete incorporating bacteria. The compressive strength of RCA concrete is found to be increased by about 20% when the cell concentration of B. subtilis is 10⁶ cells/ml. The capillary water absorption as well as drying shrinkage of RCA are reduced when bacteria is incorporated. The improvement of RCA concrete is confirmed to be due to the calcium carbonate precipitation as observed from the microstructure studies carried out on it such as EDX, SEM, and XRD.     

Recovery of metals and other beneficial products from coal fly ash: a sustainable approach for fly ash management

International Journal of Coal Science & Technology - Increasing production and disposal of coal fly ash (CFA) is a matter of serious environment concern. However, CFA contains various...     

WO3 nano-ribbons: their phase transformation from tungstite (WO3·H2O) to tungsten oxide (WO3)

Tungsten oxide (WO₃) nano-ribbons (NRs) were obtained by annealing tungstite (WO₃·H₂O) NRs. The latter was synthesized below room temperature using a simple, environmentally benign, and low cost aging treatment of precursors made by adding hydrochloric acid to diluted sodium tungstate solutions (Na₂WO₄·2H₂O). WO₃ generates significant interests and is being used in a growing variety of applications. It is therefore important to identify suitable methods of production and better understand its properties. The phase transformation was observed to be initiated between 200 and 300 ^°C, and the crystallographic structure of the NRs changed from orthorhombic WO₃·H₂O to monoclinic WO₃. It was rigorously studied by annealing a series of samples ex situ in ambient air up to 800 ^°C and characterizing them afterward. A temperature-dependent Raman spectroscopy study was performed on tungstite NRs between minus 180 and 700 ^°C. Also, in situ heating experiments in the transmission electron microscope allowed for the direct observation of the phase transformation. Powder X-ray diffraction, electron diffraction, electron energy-loss spectroscopy, and X-ray photoelectron spectroscopy were employed to characterize precisely this transformation.     

A facile synthesis of a novel three‐phase nanocomposite: Single‐wall carbon nanotube/silver nanohybrid fibers embedded in sulfonated polyaniline

A three‐phase water‐soluble nanocomposite of single wall carbon nanotube/silver nanoparticle hybrid fibers embedded in sulfonated polyaniline has been synthesized by a simple chemical solution mixing process. The nanocomposite has been characterized by high resolution electron microscopy, X‐ray diffractometry, FTIR spectroscopy, Raman spectroscopy, and thermogravimetric analysis. Optical and electrical characteristics of the nanocomposite have been determined by UV–vis absorption spectroscopy, photoluminescence spectroscopy, and four‐probe electrical conductivity measurement. A surface plasmon absorption band obtained around 460 nm indicates the presence of silver nanoparticles in the composite. The optical band gap calculation for sulfonated polyaniline vis‐a‐vis the nanocomposite supported the conductivity measurement. Over 1300 times increase in DC electrical conductivity has been observed for the three‐phase nanocomposite, with a filler loading of 20 wt %, at 306 K. This observation could be explained by Mott's variable range hopping model considering a three‐dimensional conduction. Such a nanocomposite has immense potential for use as a cathode material in lithium‐ion batteries and supercapacitors. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41692.     

Effect of primary alpha phase variation on mechanical behaviour of Ti–6Al–4V alloy

Small punch tests (SPTs) have been carried out at room temperature to correlate the microstructural variation of Ti–6Al–4V alloy with that of SPT parameters. Microstructural variation in terms of different volume fractions of primary alpha phase of Ti–6Al–4V alloy has been introduced as a result of solution annealing at different temperatures followed by thermal aging. Small punch test parameters, i.e. total area under the load vs displacement curve, area under the zone of elastic bending, plastic bending and plastic instability have been found to increase from the content of 10% primary alpha phase to 20% primary alpha phase and then these are decreasing from the content of 20% primary alpha phase to 30% primary alpha phase.