烧成及热处理工艺对钛酸锶铅基热敏材料性能及显微结构的影响

研究了烧成及热处理工艺对钛酸锶铅基热敏材料的阻温特性及显微结构的影响。通过扫描电镜（ＳＥＭ）和能量分散仪（ＥＤＡＸ）分析了材料的显微结构及不同形貌晶粒的成份。通过对组成、烧成及热处理工艺的控制，可得到具有Ｖ型ＰＴＣＲ特性的热敏材料。     

机械合金化过程中Fe70B30粉末晶粒尺寸和微观应变的研究

用Ｘ射线和电镜研究了Ｆｅ＿（７０）Ｂ＿（３０）粉末经不同时间高能球磨后晶粒尺寸和微观应力的变化。在机械合金化过程中，粉末的Ｘ射线衍射谱的宽度随球磨时间的增加逐渐加宽，这是晶粒细化和内部微观应力共同作用的结果。Ｘ射线衍射结果表明：随着机械合金化的进行，粉末的晶粒尺寸逐渐减小，球磨初期晶粒尺寸下降较快，经１５ｈ球磨，晶粒尺寸为２５ｎｍ，机械合金化进行到一定时间后晶粒尺寸下降缓慢，８０ｈ球磨后晶粒尺寸可达５ｎｍ。在机械合金化过程中球磨所造成的微观应变不大，球磨初期粉末的内应力随球磨时间增加而增加，当粉末粒子尺寸很小时，随球磨的进行粉末中的微观应变显著下降。     

Co_xFe_3－xO_4纳米晶的磁性与组成关系

各种组成的Ｃｏ＿ｘＦｅ＿３－ｘＯ＿４纳米晶是通过作者改进的化学共沉淀法制备的￣［１］。考察了系列组成Ｃｏ＿ｚＦｅ＿３－ｘＯ＿４样品的穆斯堡尔效应，推算出晶体中阳离子分布与饱和磁矩同Ｃｏ（Ⅱ）含量的关系。     

Role of vagus nerves in resiniferatoxin-induced bronchoconstriction of guinea pigs

To study the role of vagal afferent C-fibers in resiniferatoxin (RTX)-induced bronchoconstriction in vivo, 30 guinea pigs weighing 347 +/- 28 g were evenly and randomly divided into five groups: Group 1, control; 2, chronic vagotomy; 3, local capsaicin (acute); 4, local capsaicin (chronic); and 5, systemic capsaicin. Each animal was anesthetized with pentobarbital sodium, cannulated with a tracheal cannula and venous catheter, paralyzed with gallamine triethiodide, and artificially ventilated. All animals were pretreated with atropine and phenoxybenzamine. Immediately after RTX was intravenously injected, each animal in the control group exhibited profound decreases in maximal expiratory flow, dynamic respiratory compliance, and total lung capacity, as well as an increase in functional residual capacity, indicating severe airway constriction. Animals in Groups 2-4 exhibited partial abolishment, while those in Group 5 showed complete abolishment of the RTX-induced bronchoconstriction. In 12 additional animals (6 animals each in control and chronic vagotomy groups), chronic vagotomy caused also suppressive effects on capsaicin-induced airway constriction. At one min, our data demonstrate that 36-51% of noncholinergic bronchoconstriction is due to the vagal component while the remaining constriction is due to the nonvagal component. Thus, the nonvagal component plays a significant role in this type of tachykinin-mediated airway constriction.     

新型超微晶软磁合金FePCCuMoSi微观结构缺陷的正电子湮没研究

用正电子湮没方法研究了新型超微晶软磁合金的微观结构缺陷，样品选用的是在不同温度下退火的Ｆｅ８１Ｐ１２Ｃ３Ｃｕ１Ｍｏ０．５Ｓｉ２．５合金，结果表明，合金的微观结构构陷大小，密度随退火温度有规律地变化，这种现象可能与非晶的晶化过程有关。     

Cell death, axonal damage, and cell birth in the immature rat brain following induction of hydrocephalus

We hypothesized that hydrocephalus can cause death of brain cells and that generation of new brain cells might compensate for the cell loss. Hydrocephalus was induced in 3-week-old rats by injection of kaolin into the cisterna magna. The brains were studied 1 to 4 weeks later by histochemical, immunochemical, and ultrastructural methods. The ventricles enlarged progressively. Some axons in the corpus callosum were injured as early as 1 week, but axonal damage was not prevalent until 4 weeks when ventriculomegaly became severe. Dying cells detected by DNA end labeling and often identified as oligodendrocytes by electron microscopy were evident in white matter. Late-stage hydrocephalus was associated with a significant increase in the quantity of dying cells. Hydrocephalus was associated with increased Ki67 labeling and bromodeoxyuridine incorporation in the subependymal zone. Reactive changes were identified among astrocytes, oligodendroglia, and microglia. We conclude that hydrocephalus causes, in addition to axonal injury, gradual cell death in the cerebrum, particularly the white matter. The brain response includes production of new glial cells, but whether the new cells play any beneficial role remains unknown.     

智能工作站主机的MMPIS实验模型研究──一个全互连式结构MMPIS硬件环境的设计与实现

本文介绍中日国际合作开发研究的Ａ１型智能网（Ａ１型ＩＮ）智能工作站（ＩＷ）主机的并行推理硬件结构的实验模型设计与实现，给出了一种并行推理硬件支持环境实现方案和该方案在实现中若干问题的解决方法。     

Relationship of the Yttrium Compounds with the Alloying Method in ODS Ferritic Stainless Steel

ＲｅｌａｔｉｏｎｓｈｉｐｏｆｔｈｅＹｔｔｒｉｕｍＣｏｍｐｏｕｎｄｓｗｉｔｈｔｈｅ　ＡｌｌｏｙｉｎｇＭｅｔｈｏｄｉｎＯＤＳＦｅｒｒｉｔｉｃＳｔａｉｎｌｅｓｓＳｔｅｅｌＺｈａｎｇＹｏｎｇ（张勇）；ＣｈｅｎＭｉｎｇｂｉａｏ（陈明彪）；ＷｕＣｈｅｎｇＪｉａｎ...     

一种性能可调的新型节能材料－电致变色膜

本文介绍了一种性能可调的新型节能材料—电致色薄膜，描述了以其为核心的全固态灵巧窗结构、工作原理和光学调节性能，回顾了电致色材料、离子存储层和固态锂离子导体及其性质，并展望了这种新型节能材料的应用。     

高效率平面磁控溅射器的研制

介绍一种新型磁控溅射装置。它采用两块极性相对的环状磁铁的设计方法，通过扩大靶表面的等离子放电区域面积，使传统磁控溅射枪使用中经常受到的两个限制──溅射速率与靶的利用率得到了较大的改善。实验中铜靶在溅射功率密度为11W／cm~2时溅射速率约为800nm／min，如果继续提高功率则可获得更高的速率。而靶的利用率可达64％左右。另外，在认为出射粒子符合cos~nθ分布的前提下，发现当n＝3．3时，实验数据和理论数据符合得较好。