Performance of a new low‐cost laser disdrometer with rainfall intensity correction in heavy rainfall

Recently, a new low‐cost disposable laser disdrometer with the capacity for hydrometeor imaging was proposed by the authors. The laser disdrometer has the drawback of detecting false raindrops, which are splashed droplets and pooled water drops on the housing. Actual raindrops can be sorted from false raindrops by their different fall speeds, but the large size and slow falling speed of false raindrops induce significant observational dead time, affecting the raindrop capture rate and the number density of the raindrops. The ratio between the actual number of raindrops and the total number of drops including the false raindrops provides a reasonable rain intensity correction. This report describes the performance of a laser disdrometer with rain intensity correction in heavy rainfall. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Purification and some properties of cholesterol oxidase stable in detergents from gamma-proteobacterium Y-134

Cholesterol oxidase (CHO) with high stability in detergents was found from an isolated strain, Y-134, belonging to the gamma-subclass of Proteobacteria. CHO production reached its maximum by incubation at 30 degrees C for 12 d. It was purified from cell-free extract prepared by mixing the cells with 0.4% Triton X-100. The absorption spectrum of the purified enzyme exhibited maxima at 274 and 410 nm, and a shoulder at 330 nm. The molecular mass was 115 kDa with two identical subunits of 58 kDa. The enzyme oxidized cholest-5-en-3beta-ol (cholesterol) and 5alpha-cholestan-3beta-ol (dihydrocholesterol) at a high reaction rate, and the K(m) value for cholesterol was 65 microM. The stability of the enzyme was higher than other CHOs in nonionic detergents with high values of hydrophilelipophile balance (HLB) such as Triton X-450 and sodium cholate. NH2-terminal sequence analysis showed a high similarity to CHO from Burkholderia cepacia, but not to CHOs from Streptomyces or Brevibacterium.     

Thermal deformation measurement of the solder joints in electronic packages using electron moiré method

In this paper, electron moiré method is used to measure the thermal deformation of electronic packages. In order to observe the electron moiré fringe, a holographic grid was replicated on the cross section of the BGA type package at 150°C. This grid was fabricated on a glass plate using a moving point holographic system, and was replicated to measured area at high temperature. Under SEM, the holographic grid(specimen grid) and a programmed electron beam scan(master grid) interfere and form electron moiré patterns. The shear strain measurement technique using electron moiré method is described. Using the electron moiré method, the shear strains in the different solder joints were measured and analysed. Some useful results were obtained.     

Heat Source in Infinite Plane with Elliptic Rigid Inclusion and Hole

The plane thermoelastic problems of a stationary heat source in an infinite plane with an elliptic rigid inclusion and an elliptic hole are analyzed under thermally adiabatic and isothermal boundary conditions. The problems of an elliptic rigid inclusion are derived for the following cases: (1) the case that there are rigid-body displacement and rotation; and (2) the case that there is no rigid-body displacement or rotation. To analyze these problems, the following three fundamental solutions are derived: Problem A, in which a point heat source exists within an infinite domain; Problem B, in which the inclusion has a small amount of rotation; and Problem C, in which the inclusion is subjected to concentrated loads. Two cases can be obtained by superimposing these fundamental solutions. For the hole problem, the fundamental solution (Green's function) is also derived. In analysis, the complex stress functions, the mapping function, and the thermal dislocation method are used. The complex stress functions are obtained as a closed form. For analytic examples, the stress distributions are shown under thermally adiabatic and isothermal boundary conditions. For the crack problem, the stress intensity factors are shown for the location of the heat source.     

Particle arrangement and its application

The method by which micrometer-sized particles are arranged, is described. An electrified pattern is drawn on a polished insulating substrate using a SEM with a CAD facility. The substrate is dipped in a suspension of particles. The particles adhere to the substrate and form the pattern corresponding to the electrified pattern by the electrostatic force. The arranged particles are fixed by coating with a fluoride polymer of thin film. The method is applicable to the production of an inflammable gas sensor.     

Overcharge protection effect and reaction mechanism of cyclohexylbenzene for lithium ion batteries

We studied the relationship between the structure of aromatic compounds and the overcharge protection effect, using cyclohexylbenzene, isopropylbenzene, and toluene as the overcharge protection agents. Cyclohexylbenzene proved to be the most effective overcharge protection agent among these aromatic compounds. The effect is enhanced using a higher concentration of cyclohexylbenzene and elevated temperatures. The reaction product of cyclohexylbenzene was analyzed using field desorption mass spectrometry to elucidate its reaction mechanism. The results suggested that some of the overcharge reaction products of CHB were more reactive than that of IPB, which is consistent with the better suppressing effect on overcharging of the active material in the positive electrode.     

Antioxidative activities of some peptides isolated from hydrolyzed potato protein extract

Three peptides (5A, 5C and 6C), purified from potato protein hydrolysate fractions, possessed antioxidative activities. Isolation and purification were carried out using gel permeation chromatography and successive reverse-phase HPLC. These three peptide fractions were sequenced and identified as Phe-Gly-Glu-Arg, Phe-Asp-Arg-Arg and Phe-Gly-Glu-Arg-Arg, respectively. The fractions 5A, 5C and 6C inhibited linoleic acid oxidation by 55.3%, 58.5% and 61.7% using β-carotene decolorization assay system, while the inhibition ratio was 32.1%, 93.0% and 93.4% in the ferric thiocyanate assay system, respectively. The peptide fractions 5A, 5C and 6C also repressed lipid oxidation by 24.2%, 14.7% and 26.4% in the erythrocyte membrane ghost assay system, respectively. Oral administration of 100 mg/kg of body weight of the chemically synthesized peptides, 5A, 5C and 6C to rats (male Wistar) 30 min prior to ethanol injection reduced ethanol-induced gastric mucosal damage by 67.9%, 57.0% and 60.3%, respectively. Conclusively, these peptides have shown real potent antioxidative activities and could further be investigated for potential use as food additives.     

Hydroboration copolymerization

Summary Organoboron copolymers were prepared by polyaddition of diene mixture or diene/diyne mixture, respectively, with thexylborane (1). When a mixture of dienes such as 1,2-diallyloxyethane (2a) and p-diallylbenzene (2b) was polymerized with 1, the peaks in GPC using both UV and RI detectors were shifted to higher molecular weight regions with the increase of the amount of 1. The molecular weight distribution of the copolymer obtained by this method indicated clear difference from that of a mixture of two homopolymers. On the other hand, when the poymerization between 1 and 1,7-octadiene (2c) was carried out in the presence of a trace amount of 1,7-octadiyne (4), the molecular weights of organoboron polymers were found to be increased when the ratio of 4/2c was increased.     

Recent Advances in Communication and Internet Technology

Telecommunication Systems -     

Atomically flat diamond (111) surface formation by homoepitaxial lateral growth

A process of homoepitaxial growth of diamond (111) films by microwave plasma-enhanced chemical vapor deposition has been investigated characterizing areas by ex-situ atomic force microscopy. The evolution of surface morphology during a lateral growth of (111) diamond was visualized utilizing a mesa structure as a marker. Lateral growth forms atomically flat surfaces, which show atomically flat terraces over several hundred nm widths and single bilayer steps of (111) diamond.