A Real-Time Application of Modified Inductor Coupled KY Converter Topology in Speed Control of E-Bikes

Abstract

Congested road network and traffic jam lead to vehicle idling and fuel wastage. An E-bike which is a solution to this is often available with Thumb Throttle Mechanism and single speed operation. A motor controller with multiple output voltage levels and Click Throttle Mechanism is presented in this paper which provides variable speed operation, better power utilization and is highly economical. Proposed modified KY converter utilizes the turns ratio of an On-Line Tap Changer (OLTC) to generate multiple output voltages for variable speed commutation. This possess a stable continuous conduction mode throughout its operation and reduced switching transients when compared to the existing topologies. Mutually independent control variables namely turns ratio and duty ratio, are used here for voltage conversion, which facilitates the flexible transition between multiple output voltage levels. A 15?W prototype of the proposed modified inductor coupled KY converter is realized using Arduino Uno Board.     

A novel prognosis and segmentation of necrosis (dead cells) in contrast enhanced T1-weighted glioblastoma tumor with automatic contextual clustering

In recent years, mortality rate with high-grade tumor has been increased significantly especially with glioblastoma (GBM) brain tumor while compared to other malignant brain tumor. Here, the amount of dead cells accommodated with the tumor tissue in GBM brain tumor play a vital task and necessitate an earlier diagnosis of malignancy with the GBM tumor. It inspires to implement new automatic diagnosis system which detects the dead cells and tumor tissue with the GBM brain tumor, such that the survival rate of the diseased can easily be prognosis by the Radiologist and Neurosurgeon. The main objective of this article is to detect the amount of dead cells with respect to tumor tissue associated with the GBM brain tumor which desires the impact factor of the brain tumor. In this framework, initially, the new contrast enhancement modality is incorporated to enhance the gray information over the dead cells and the tumor tissue with the T1-weighted MRI GBM brain tumor. In this enhancement, the edges of the tumor cells and its dead cells are magnified efficiently. As the noises and outliers with MR image is unpredictable and it experiences the variable amount of noises over the local window, the contextual information over each pixel of the image is adaptively modified with respect to the amount of noise over local window using adaptive contextual clustering. The performance evaluation of the framework is investigated which exhibits the overwhelming result compared to conventional detection techniques.     

Toughening of Polylactic Acid: An Overview of Research Progress

To overcome the limitations of polylactic acid, alterations are needed to enhance its toughness, to improve handling and for various applications. Extensive studies were reported, mainly in the area of blends with renewable resource polymer blends. Better phase dispersion between the blend materials is achieved either by reactive mixing of the two components or by incorporation of a block copolymer compatibilizer, finally showing highly enhanced property. In this article, the recent research progress of different toughening processes of PLA via blending is reviewed and a detailed understanding about toughening of PLA using biodegradable or renewable polymers has been established.     

Design and Characterization of a W-Band Folded-Waveguide Slow-Wave Structure

A single-section slow-wave structure for a W-band folded-waveguide traveling-wave tube with operating bandwidth of around 4% was designed for delivering the output power of 50 W at the operating voltage of 13.5 kV and operating beam current of 80 mA. The design was carried out using analytical formulations and 3D electromagnetic simulations. The beam-wave interaction analysis was carried out using large signal Lagrangian analysis and particle-in-cell simulation. The folded-waveguide slow-wave structure along with input-output couplers and RF windows were fabricated. Cold test measurements were carried out for dispersion characteristics of the slow-wave structure and voltage standing-wave ratio and insertion loss characteristics of the RF window. The measured cold circuit parameters show close agreement with the analysis.     

Numerical study of heat and moisture transport through concrete at elevated temperatures

This research article focuses on numerical investigation of heat and moisture transport through concrete exposed to high temperatures such as fire. The conservation equations for moisture and energy transport through concrete have been represented in terms of temperature, pore pressure and vapor content as field variables. As the resulting governing equations are coupled and non-linear, the equations were solved numerically using Galerkin’s weighted residual finite element method and an iterative solution technique. After validating the model, a detailed simulation study has been carried out to understand the role of gradients of temperature, pore pressure and vapor content on heat and moisture transport through concrete exposed to ISO 834 fire curve. Results obtained at the end of 30 minutes exposure of concrete show that the temperature gradients become very steep after 12 minutes of exposure of concrete, which in turn results in increased vapor generation and 93% of vapor generation is completed at the end of 20 minutes. Due to steep temperature gradient along the length of concrete, condensation of vapor takes place which is followed by blockage of pores giving rise to sudden peak pore pressure rise and 97% of peak pore pressure is attained at the end of 18 minutes itself. It is observed that for the initial 18 minutes, the peak pore pressure front and peak vapor content front follow the same path and after 18 minutes the peak vapor content front moves slightly ahead of the peak pore pressure front.     

Examining the relationships among e-government maturity,corruption, economic prosperity and environmental degradation: A cross-country analysis

There is growing interest in the role and contribution of e-government to the levels of corruption, economic prosperity and environmental degradation of nation states. In this paper, we use publicly available archival data to explore the relationships among them. Results substantiate a significant relationship between (1) e-government maturity and corruption; and (2) e-government maturity, economic prosperity and environmental degradation through the mediating effects of corruption. The findings suggest that while e-government maturity did not contribute to economic prosperity and environmental degradation, its value could be realized indirectly via its impacts on corruption. Our findings contribute to the theoretical discourse on e-government impact by identifying the role of e-government in a country and provide indications to practice on enhancing its economic prosperity and lowering its environmental degradation by managing the levels of e-government maturity and corruption.     

Surface modification and characterization of zirconium carbide particulate reinforced C70600 CuNi composite fabricated via friction stir processing

In the present research work, Friction stir processing (FSP) technique has been applied to develop a C70600 graded copper-nickel (CuNi) Surface metal matrix composite (SMMC) reinforced with and without addition of ZrCp. Rotational and traverse speeds were set as 1200 rpm and 30 mm/min, respectively. The fabricated SMMC were metallurgically characterized by using Optical microscope (OM) and Field emission scanning electron microscope (FESEM). The homogeneous distribution of ZrC particles and good interfacial bonding between matrix/reinforcement were observed via OM and FESEM microscopes. The microhardness of the CuNi/ZrC surface composite was observed by using microhardness tester at the cross section of the sample. The average higher microhardness of 148 Hv at CuNi/ZrC SMMC and lower microhardness of 115 Hv at FSPed CuNi was found. The Ultimate tensile strength (UTS) value was measured by using micro tensile testing machine. The UTS value of CuNi/ZrC composite and FSPed CuNi were observed to be 310 MPa and 302 MPa, respectively. The mode of fracture was also observed via FESEM. The X-ray diffraction (XRD) test was carried out to confirm the presence of CuNi & ZrC in the SMMC layer.     

Self-activated ‘green’ carbon nanoparticles for symmetric solid-state supercapacitors

Tuning of porosity and surface properties of nanoparticles especially on carbon-based nanomaterials, adopting a ‘greener’ or self-activation synthesis technique for electrical charge storage, is progressing. Herein, we report the self-activation of Teak wood sawdust in a nitrogen atmosphere at different activation temperatures to synthesize carbon nanoparticles. The activated carbon nanoparticles synthesized at 900 °C exhibits a maximum?~?360 m² g^?1 surface area with?~?2 nm average pore size diameter. Five electrolytes viz. KOH, KCl, Na₂SO₄, NaCl, and H₃PO₄ are used for studying the supercapacitance nature of the activated carbon nanoparticles in a 3-electrode configuration. A maximum specific capacitance of?~?208 F g^?1 @ 0.25 A g^?1 is obtained in 1 M KOH as the electrolyte. Two symmetric supercapacitors, aqueous (1 M KOH) and solid-state (PVA/KOH), are fabricated, and their performance difference is compiled. The solid-state symmetric supercapacitor performs in a wider voltage window (1.7 V) with a superior energy density of 27.1 Wh kg^?1 at a power density of 178 W kg^?1.

Graphical abstract