Segmented conjugated polymer based on poly(α-thiophenediyl)benzylidine

Summary Segmented polymers with random sequences of conjugated and non-conjugated blocks are produced by partial dehydrogenation of poly(-thiophenediyl)benzylidene. The fraction of conjugated block was controlled by the elimination time. The polymers gave photoluminescence. Absorption coefficients of the polymers increased with the rate of dehydrogenation, and the highest fluorescence intensity were achieved around 9 % conjugation conversion. The polymers were characterized by ¹H- and ¹³C-n.m.r. and infrared spectra, and were soluble in common organic solvents, which suggests a good processability.     

Creation of the active site for methanol synthesis on a Cu/SiO2 catalyst

The effect of ZnO/SiO₂ in a physical mixture of Cu/SiO₂ and ZnO/SiO₂ on methanol synthesis from CO₂ and H₂ was studied to clarify the role of ZnO in Cu/ZnO-based catalysts. An active Cu/SiO₂ was prepared by the following procedure: the Cu/SiO₂ and ZnO/SiO₂ catalysts with a different SiO₂ particle size were mixed and reduced with H₂ at 523-723 K, and the Cu/SiO₂ was then separated from the mixture using a sieve. The methanol synthesis activity of the Cu/SiO₂ catalyst increased with the reduction temperature and was in fairly good agreement with that previously obtained for the physical mixture of Cu/SiO₂ and ZnO/SiO₂. These results indicated that the active site for methanol synthesis was created on the Cu/SiO₂ upon reduction of the physical mixture with H₂. It was also found that ZnO itself had no promotional effect on the methanol synthesis activity except for the role of ZnO to create the active site. The active site created on the Cu/SiO₂ catalyst was found not to promote the formation of formate from CO₂ and H₂ on the Cu surface based on in situ FT-IR measurements. A special formate species unstable at 523 K with an OCO asymmetric peak at ~1585 cm^-1 was considered to be adsorbed on the active site. This revised version was published online in July 2006 with corrections to the Cover Date.     

Additional kernel observer: privilege escalation attack prevention mechanism focusing on system call privilege changes

International Journal of Information Security - Cyberattacks, especially attacks that exploit operating system vulnerabilities, have been increasing in recent years. In particular, if administrator...     

Effect of Computational Constraints on Zero-Dimensional Computations for the Nanosecond-Order Ignition Process of the CH4/Air Mixture

Combustion, Explosion, and Shock Waves - Zero-dimensional computations of nanosecond-order ignition using a nanosecond discharge are performed with two constraints. The effects of these constraints...     

Experimental design to evaluate properties of electrospun fibers of zein/poly (ethylene oxide) for biomaterial applications

The production of polymer fibers from the combination of zein and PEO might have great potential in the field of biomaterial. Zein/PEO fibers were obtained in this work through solution electrospinning. An experimental design, 2^4-1, was used for evaluating the influences of PEO content in the blend, distance from the needle tip to the collector, applied electric voltage and solution flow for average fiber diameter and relative-yield process. Beyond this, the relationship between PEO content in the blend and the fiber properties were evaluated through FTIR, DSC, TG, tensile tests, and cytotoxic tests. The factor that exerts the greatest effect on the average fiber diameter response was the electrical voltage. The increase in PEO content in the blend decreased the thermal stability and increased the degree of the fibers' crystallinity. The mechanical tests showed that fibers with higher elongation were obtained at richer PEO blends. The fibers presented cytocompatible characteristics.     

Hydrogen absorption characteristics of Pd1−xLix (x = 0.055 and 0.072) alloys and ordered Pd7Li

Thermodynamic quantities were determined for the absorption of hydrogen in Pd-5.5at.%Li and Pd-7.2at.%Li alloys, the latter alloy being in the two-phase field of saturated -Pd(Li,s) solid solution and the ordered Pd₇Li phase. Data were also determined for the Pd-10.6at.%Li alloy which consists only of the ordered Pd₇Li phase. The data were determined from measurements of pressure-composition isotherms at temperatures between 273 K and 463 K and hydrogen pressures up to 1000 Torr. The Pd---Li alloys dissolve considerable amounts of hydrogen and form a more stable hydride phase than Pd despite the lattice contraction which occurs on alloying Pd with Li. The hydrogen solubility in the ordered Pd₇Li phase alone is a little smaller than that in the two-phase mixture. The large hydrogen absorption of Pd---Li alloys, which does not depend on the presence of ordered Pd₇Li, may be attributed to (i) an attractive H---Li pair interaction, (ii) a decrease in the strain energies necessary for hydrogen occupation of the interstices, because of the similar lattice parameters of the -Pd(Li,s) and ordered Pd₇Li phases, and the large compressibility of Pd---Li alloys, and (iii) the valence of 1 of Li in Pd compared with 3 for, for example, Y in Pd.     

A new refining process for iron oxide using iron ore and its application to hard ferrites

Kawasaki Steel Corporation and Kawatetsu Mining Co., Ltd. have developed a new refining process to extract iron oxide from iron ore to meet the increase in demand for iron oxide for high- grade hard ferrites. This article discusses the quality of iron oxides and the characteristics of the hard ferrite magnets produced from them.     

Predicting Long‐Term Changes in Riparian Bird Communities in Floodplain Landscapes

As anthropogenic impacts on riverine ecosystems expand, both aquatic and terrestrial ecosystems are influenced over large spatiotemporal scales. We predicted how riparian bird communities changed in response to long‐term changes in floodplain landscapes such as woodland expansion (i.e. rapid increases in vegetation cover on gravel bars and the progress of vegetation succession due to a decrease in the frequency and magnitude of flood disturbance). To test the hypothesis that woodland expansion after dam construction reduces the abundance of gravel bar‐nesting birds and increases the abundance of forest‐nesting birds, we estimated historical changes between past and present bird abundances using species distribution models across multiple rivers that were either unregulated or regulated by dams. We created past and present vegetation maps from remote sensing images and used habitat quantities as explanatory variables in the species distribution models. As we hypothesized, the estimated abundance of gravel bar‐nesting birds decreased and that of forest‐nesting birds increased because of woodland expansion in some regulated rivers. This suggests that anthropogenic alterations of riverine conditions (e.g. dam construction) can affect terrestrial ecosystems (e.g. riparian bird communities) through changes in floodplains (e.g. woodland expansion). In addition, our findings highlight the efficacy of combining spatial and temporal analyses when examining long‐term ecological dynamics. Copyright © 2013 John Wiley & Sons, Ltd.     

High‐pixel‐rate grating‐light‐valve laser projector

Abstract— A high‐pixel‐rate, high‐contrast (30,000:1) wide‐color‐gamut grating‐light‐valve laser projector is reported. A new optical engine enabling high‐frame‐rate (240 Hz) scan projection is employed. Panoramic wide‐angle‐scan projection with a 64:9 aspect ratio was also developed. Speckle noise is eliminated using a simple but highly efficient technique. The optical throughput efficiency of the grating‐light‐valve laser projector is reviewed.