Lignite industry in Greece within a world context: Mining,energy supply and environment

Today coal covers 38% of global production and roughly 30% of the EU-25 power output.     

Magnetic properties and critical currents of epitaxial YBa2Cu3O7-x films

The authors report results of magnetic and transport measurements on thin epitaxial films of YBa₂Cu₃O_7-x which show critical current densities of 10⁷ A/cm² at 4.2 K. They exhibit well-formed symmetrical hysteresis loops and flux-trapping effects and linear susceptibilities at low fields. Magnetic and transport critical currents are in good agreement at low temperatures. The above properties are attributed to strong pinning from point defects which are suggested to be more numerous in films than in bulk single crystals. Diamagnetic shielding effects can be very large and are proportional to the critical current at zero field; however, there is a large penetration of H_a at all field values. Field-cooled magnetization is always very small, being only a few percent of the diamagnetic shielding. This small value is attributed to a balance between trapped flux and expelled flux in the cooling process. The strong pinning in attributed to a high density of defects in the film     

Reliability assessment of the rotation algorithm for earthquake damage estimation

A rotation algorithm was developed that computes the slope of permanently deformed columns subjected to earthquake ground motion using micro-electro-mechanical system accelerometers. Previous studies by the authors have shown that the algorithm can provide estimates of the residual displacement in the column, and thus the story drift can be evaluated. The algorithm was validated through applications to columns that deflect in single and double curvature. Information from tests on such columns conducted at various laboratories was used to conduct the study. The optimal number of sensors and their placement on the test columns were determined through a series of numerical analyses. The accuracy of the rotation and displacement estimates is assessed under the assumptions of zero-noise sensors and perfect measurements. In this paper, the effect of measurement error and sensor noise on the predicted rotations and corresponding deformations is studied in order to provide bounds on the accuracy of the rotation algorithm and on the allowable sensor noise. The same test columns are used for the purposes of these analyses.     

Hydrolytic Depolymerization of PET in a Microwave Reactor

Recycling of PET was examined using hydrolytic depolymerization in an alkaline solution under microwave irradiation. The reaction was carried out in a sealed microwave reactor in which the pressure and temperature were controlled and recorded. The main products were the monomers TPA and EG. The effect of reaction temperature, time, amount of PET and alkaline concentration on the degree of PET depolymerization and TPA recovery was investigated. Microwave irradiation was found to reduce the time needed to achieve a specific degradation of PET significantly, with almost complete depolymerization occurring in 30 min at 180 °C and only 46 W of microwave power. Using a phase transfer catalyst (TOMAB) resulted in the same amount of unreacted PET but at significantly lower depolymerization temperatures.

     

Laser Melting of Spark Plasma-Sintered Zirconium Carbide: Thermophysical Properties of a Generation IV Very High-Temperature Reactor Material

Melting temperatures of zirconium carbide were investigated in validating a novel thermal analysis technique for refractory materials. Commercial ZrC_0.96 powder was densified by spark plasma sintering to >96% relative density after 6–30 min at 2173–2453 K under 40–100 MPa. Sintered ceramics were heated to >4000 K via pulsed laser heating. Mean values for solidus and liquidus transitions were 3451 and 3608 K, respectively, in fair agreement with the present phase diagram. Postmelting analysis revealed dendritic microstructure and composition consistent with single-phase ZrC. Subsurface gas porosity and ZrC–C eutectic indicate complex processes occurring during melting and freezing.     

Algorithmic Exploration and Implementation of a MIMO-OFDM Equalizer

In this paper we explore algorithms and architectures for the implementation of a MIMO OFDM Equalizer for high speed wireless communications. The algorithmic exploration is based on matrix computations and factorizations. A scalable computational methodology and architecture is proposed for the implementation of a 4×4 MIMO OFDM. A 2×3 Equalizer supporting Maximum Ratio Combining and Zero Forcing equalization for 20/40 MHz 64-QAM OFDM modulation has been implemented in 150 nm technology. The Equalizer area is 133k gates and the maximum throughput achieved is 480Mbits/s. The system described in this paper is compliant with the latest IEEE standard for MIMO wireless communications (802.11n)     

Lead contamination and associated disease in captive and reintroduced red kites Milvus milvus in England

Since 1989, a red kite Milvus milvus reintroduction programme has been underway in the United Kingdom, with 4-6 week old nestlings brought into captivity and held for 6-8 weeks before reintroduction. As scavengers, red kites may consume unretrieved game, and ingest shot or lead (Pb) fragments in their prey's flesh. We evaluated exposure to Pb in captive and wild red kites by taking blood samples from 125 captive young red kites prior to release, through analysing 264 pellets (regurgitated by wild birds) collected from under a roost site, and analysing Pb concentrations in livers and/or bones of 87 red kites found dead between 1995 and 2003. Lead isotope analyses of livers were also conducted in an effort to identify Pb exposure routes. Forty-six (36.8%) kites sampled prior to release had elevated blood Pb concentrations (201-3340 microg l(-1)). The source of this Pb was probably small fragments of lead ammunition in the carcasses of birds or mammals either fed to the nestlings by their parents or, more likely, subsequently whilst in captivity. Once released, kites were also exposed to lead shot in their food, and a minimum of 1.5-2.3% of regurgitated pellets contained Pb gunshot. Seven of 44 red kites found dead or that were captured sick and died within a few days had elevated (>6 mg kg(-1) dry weight [d.w.]) liver Pb concentrations, and six of these (14%) had concentrations of >15 mg kg(-1) d.w., compatible with fatal Pb poisoning. Post-mortem analyses indicated that two of these birds had died of other causes (poisoning by rodenticide and a banned agricultural pesticide); the remaining four (9%) probably died of Pb poisoning. Bone samples from 86 red kites showed a skewed distribution of Pb concentration, and 18 samples (21%) had Pb concentrations >20 mg kg(-1) d.w., indicating elevated exposure to Pb at some stage in the birds' life. Lead isotopic signatures (Pb (208/206); Pb (206/207)) in liver samples of the majority of kites were compatible with those found in lead shot extracted from regurgitated pellets. Lead isotope ratios found in the livers of kites with very low Pb concentrations were distinct from UK petrol Pb isotopic signatures, indicating that birds were exposed to little residual petrol Pb. We conclude that the primary source of Pb to which red kites are exposed is lead ammunition (shotgun pellets or rifle bullets), or fragments thereof, in their food sources; in some cases exposure appears sufficient to be fatal. We make recommendations to reduce Pb poisoning in both captive and wild red kites and other scavenging species.     

Reliability assessment of cutting tool life based on surrogate approximation methods

A novel reliability estimation approach to the cutting tools based on advanced approximation methods is proposed. Methods such as the stochastic response surface and surrogate modeling are tested, starting from a few sample points obtained through fundamental experiments and extending them to models able to estimate the tool wear as a function of the key process parameters. Subsequently, different reliability analysis methods are employed such as Monte Carlo simulations and first- and second-order reliability methods. In the present study, these reliability analysis methods are assessed for estimating the reliability of cutting tools. The results show that the proposed method is an efficient method for assessing the reliability of the cutting tool based on the minimum number of experimental results. Experimental verification for the case of high-speed turning confirms the findings of the present study for cutting tools under flank wear.     

Detailed transient numerical simulation of H2/air hetero-/homogeneous combustion in platinum-coated channels with conjugate heat transfer

Transient two-dimensional simulations of fuel-lean H₂/air combustion were performed in a 2-mm-height planar channel coated with platinum, using detailed hetero-/homogeneous chemistry and transport as well as heat conduction in the solid wall. The developed model resolved, for the first time, all relevant spatiotemporal scales in a practical channel-flow reactor configuration. A parametric study was carried out to investigate the effects of wall material, inlet velocity, and inlet temperature on the fundamental catalytic and gas-phase combustion processes. Computational singular perturbation (CSP) analysis identified the key catalytic reactions affecting light-off and homogeneous ignition. Homogeneous ignition crucially depended on the OH desorbing fluxes from the catalyst, while flame propagation and stabilization involved time scales of a few milliseconds. During the short duration of the light-off event, the ensuing Stefan velocity appreciably altered the flow field. Predictions of time accurate numerical simulations were further compared against those of a code relying on the quasisteady state assumption, and the specific conditions under which the latter was invalidated were identified. Finally, CSP analysis unraveled the reasons for the high computational cost of the fully transient 2-D simulations. The surface reaction mechanism exhibited a high stiffness with fastest time scales of the order of 10^-12${10}^{-12}$ s, pertaining to the hydrogen adsorption and to the H(s) + O(s) = OH(s) + Pt(s) reactions. These time scales were in turn six orders of magnitude shorter than the ones associated with gas-phase chemistry or with a simplified single-step catalytic reaction.     

The bulk photovoltaic effect in ferroelectric Pb(Zr,Ti)O3 thin films

Abstract

The bulk photovoltaic effect (BPE) has been investigated in lead zirconate titanate (PZT) thin films. Measurements of the kinetics, spectral distribution and photocurrent hysteresis loops have been made. In the extrinsic spectral region, the steady-state photocurrent is primarily due to the BPE, where the photovoltaic tensor component has been determined to be G₃₁ = 10_?9 cm/V. However, in the intrinsic region, the BPE has not been determined due to the strong contribution from photoinjection currents. Finally, it is shown that the BPE may be the driving force for photoinduced hysteresis changes in PZT thin films, particularly in the extrinsic spectral region.