Environmentally benign precipitation copolymerization of methacrylate ester and styrene to make polymeric microspheres in supercritical carbon dioxide

The polymeric microspheres were synthesized by the precipitation copolymerization of glycidyl methacrylate (GMA) with methacrylic acid(MAA) or 2‐hydoxyethyl methacrylate (2‐HEMA) containing styrene (ST) in SC‐CO₂. Scanning electron microscopy (SEM) showed that the products were spherical microparticles, with the addition of MAA and/or 2‐HEMA as the monomer, with diameter of 0.2–2 μm. The effects of copolymerization pressure, temperature, and ratios of GMA/MAA, ST, and/or GMA/2‐HEMA, on the particle size and morphology were investigated in detail. A new experiment setup is proposed for the large amount of production, based on the rule of lower monomer concentration, more stable system, and better use of the present polymerization apparatus. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2425–2431, 2007     

Sintering Kinetics at Isothermal Shrinkage: II, Effect of Y2O3 Concentration on the Initial Sintering Stage of Fine Zirconia Powder

The shrinkage behavior of fine zirconia powders containing 2.9 and 7.8 mol% Y₂O₃ was investigated to clarify the effect of Y₂O₃ concentration on the initial sintering stage. The shrinkage of powder compact was measured under both conditions of constant rates of heating (CRH) and constant temperatures. CRH measurements revealed that when the Y₂O₃ concentration of fine zirconia powder increased, the starting temperature of shrinkage shifted to a high temperature. Isothermal shrinkage measurements revealed that the increase in Y₂O₃ concentration causes the shrinkage rate to decrease. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. When the Y₂O₃ concentration increases, both Q and β₀ of diffusion increase. It is, therefore, concluded that the increase in Y₂O₃ concentration of fine zirconia powder decreases the shrinkage rate because of increasing Q of diffusion at the initial stage of sintering.     

Thermal behaviors and flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives

The thermal behaviors and the flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives were studied. The combustion was measured by the Underwriter laboratory (UL) test and cone calorimeter test and thermogravimetric analysis and program‐mass spectroscopy were applied to analyze the thermal behaviors. The blend with halogen additives showed the best result in the UL test. However, the blend with red‐phosphorous was the best in the cone calorimeter test. As the styrene sequence in the copolymer tended to degradate at a lower temperature, the major scission products spouted out from the polymer surface originated from polystyrene. The shorter the ignition times of the blends with red‐phosphorous were, the lower the peak heat release rates were. It was an interesting phenomenon because it suggested that the chemical structure of the residue changed to more stable polymers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 156–161, 2007     

Interfacial tension of demixed polymer solutions near the critical temperature: polystyrene + methylcyclohexane

Interfacial tension between demixed solutions of polystyrene + methylcyclohexane has been measured near the critical temperature as a function of temperature using polystyrenes with molecular weights 9000 ～ 1.26 × 10⁶. The critical exponent for the interfacial tension was determined to be about 1.30 for the lower molecular weight systems. However, for higher molecular weights the exponent could not be obtained because the system departed from critical behaviour. Magnitudes of the interfacial tension were proportional to about N^?0.44, where N is the polymerization index. Experimental results were compared with the recently-proposed theories and found to be in qualitative agreement. The tricritical theory of polymer solutions was also compared with the experimental results.     

Effect of Additives on the Electromechanical Properties of Pb(Zr,Ti)O3–Pb(Y2/3W1/3)O3 Ceramics

Dielectric and piezoelectric properties of 0.02Pb(Y_2/3W_1/3)O₃ 0.98Pb(Zr0.52Ti0.48)O3 ceramics doped with additives (Nb₂O₅, La₂O₃, MnO₂, and Fe₂O₃) were investigated. The grain sizes of these ceramics decreased with increasing amounts of additives. For additions of MnO₂ and Fe₂O₃, dielectric losses decreased, while for Nb₂O₅ and La₂O₃, these values increased. The maximum values of the mechanical quality factor Q_m were found to be 956 and 975 for additions of 0.9 wt% Fe₂O₃ and 0.7 wt% MnO₂, respectively, but donor dopants (Nb₂O₅ and La₂O₃) did not change the values of Q_m . On the other hand, the piezoelectric constant d₃₃ and the electromechanical coupling factor k_p decreased with additions of MnO₂ and Fe₂O₃, but improved with additions of Nb₂O₅ and La₂O₃.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Catalyst Design of Pt-Modified Ni/Al2O3 Catalyst with Flat Temperature Profile in Methane Reforming with CO2 and O2

Pt(0.3)/Ni(10)/Al₂O₃, prepared by a sequential impregnation method, exhibited a more excellent performance in methane reforming with CO₂ and O₂ in terms of the catalytic activity and the temperature profile of the catalyst bed than Pt(0.3) + Ni(10)/Al₂O₃ prepared by a coimpregnation method, Ni(10)/Al₂O₃, Pt(0.3)/Al₂O₃, and Pt(10)/Al₂O₃. It is thought that this is because the surface Pt atoms on Ni catalyst can contribute to the enhancement of the catalyst reducibility.     

Relation between crystal structure and lattice oxygen content of sintered reaction-bonded silicon nitride

When reaction-bonded silicon nitride containing MgO/Y₂O₃ additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si₃N₄ (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si₃N₄ crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si₃N₄ crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si₃N₄ ceramics.     

Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass

Mechanical deformation of Pd₄₀Ni₄₀P₂₀ was characterized in compression over a wide strain rate range (3.3×10⁻⁵ to 2×10³ s⁻¹) at room temperature. The compression sample fractured with a shear plane inclined 42 degree with respect to the loading axis, in contrast to 56 degree for the case of tension. This suggests the yielding of the material deviates from the classical von Mises yield criterion, but follows the Mohr-Coulomb yield criterion. Fracture stress as well as strain was found to decrease with increasing applied strain rate. The compressive stress (1.74 GPa) was also found to be higher than the tensile fracture stress at a quasi-static strain rate. Close examination of the stress–strain curves revealed that localized shear might have occurred at a compressive stress of about 1.4 GPa, much lower than the “apparent” yield stress of 1.74 GPa. However, the stress of 1.4 GPa for shear band initiation is almost the same as the fracture stress measured at a dynamic strain rate of 5×10² s⁻¹. These results suggested that the fracture of a bulk metallic glass is sensitive to the applied loading rate.     

Microstructure development of steel during severe plastic deformation

The microstructure development during plastic deformation was reviewed for iron and steel which were subjected to cold rolling or mechanical milling (MM) treatment, and the change in strengthening mechanism caused by the severe plastic deformation (SPD) was also discussed in terms of ultra grain refinement behavior. The microstructure of cold-rolled iron is characterized by a typical dislocation cell structure, where the strength can be explained by dislocation strengthening. It was confirmed that the increase in dislocation density by cold working is limited at 10¹⁶m⁻², which means the maximum hardness obtained by dislocation strengthening is HV3.7 GPa. However, the iron is abnormally work-hardened over the maximum dislocation strengthening by SPD of MM because of the ultra grain refinement caused by the SPD. In addition, impurity of carbon plays an important role in such grain refinement: the carbon addition leads to the formation of nano-crystallized structure in iron.